ceaser:


Niiice

What's the freezer consumption digits like?

As regards the "fingered" 219L, it still freezes okay, right? In case you wanna give it up, I might have one beverage drinks retailer who is interested in getting used freezer for cheap.


This BMV thingy, it can only be used with those inverters that come with RJ11 ports, right?

Me I nor even dey connected to utility supply at all. And today isn't looking promisimg either, only signs of more rain drizzles. E be like say generator will come on line for some.

ojeysky:


Max I have seen on it is 200w and when it achieves the -20c that it is set it consumes little or until compressor comes back online.

The 219L has been grabbed already, are you based on Ado by the way?

The BMV is not connected to my inverter it's connected to battery directly and the screenshot is from the phone app through Bluetooth

Yeah the weather is not smiling in the last few days, fingers remain crossed for today

ceaser:


After the freezer reaches 20 degrees, what is the consumption it settles at and maintains?

On and off, mostly off. But on for today. Àfàò road.

So that means that that BMV can be used ordinarily without any special types of inverter-SCC communication.

zeestone99:
Hello house
Used genus 1.5kva inverter available - 50k slightly negotiable.

Call - 08117398294
Chat - http:///2348117398294

tonididdy:
How to identify authentic distilled water fams?
Or can one just use any water


(These products in the market are scary).
Pls contribute

zeestone99:


Of course yes. It comes with its own shunt that goes into the battery. No special Inverters needed except for some remote viewing and gx device levels ( victron inverters only).

stevebond007:


Thanks sir.


techfine 3.5kva inverter 150000
200ah techfine ba3. 12v (4) 480,000
solar panel (12). 360,000
solar charge controller. 100,000
surge protector. 60,000
earthing. 40,000
kits. 60,000
service charge. 40,000
cabinet for battery. 45,000

total. #1,335,000

Valto:
dem say, dem de know taste of shit from the smell of fart
i advertised 8pcs for several weeks here, which was even negotiable and yet there was no serious interest on it.is it when i tied down serious funds on several quantities for complete 4 to 5months, that buyers will line up? let me come and be going >>>

ojeysky:


Max I have seen on it is 200w and when it achieves the -20c that it is set it consumes little or until compressor comes back online.

The 219L has been grabbed already, are you based on Ado by the way?

The BMV is not connected to my inverter it's connected to battery directly and the screenshot is from the phone app through Bluetooth

Yeah the weather is not smiling in the last few days, fingers remain crossed for today

Trippledots:


All the places we use techfine batteries as stop gap replacement, in the past 6months have either packed up or are limping, waiting to be decommissioned.

They saw about 50%DoD, C3 to C4 max discharge rates....
There was enough solar and Diesel gen backup to ensure DoD was adhered to.

These were 1000ahr/2v cells anyway.

Maybe that info will help in your decision making.

Trippledots:


All the places we use techfine batteries as stop gap replacement, in the past 6months have either packed up or are limping, waiting to be decommissioned.

They saw about 50%DoD, C3 to C4 max discharge rates....
There was enough solar and Diesel gen backup to ensure DoD was adhered to.

These were 1000ahr/2v cells anyway.

Maybe that info will help in your decision making.

mctfopt:


I have a Thermocool 203L freezer that takes only 110w at max but runs lower than that. I'm surprised that the freezer is that efficient and doesn't consume much.

ceaser:


After the freezer attains minus 20 degrees, what is the consumption it settles at and maintains?

On and off, mostly off. But on for today. Àfàò road.

So that means that that BMV can be used ordinarily without any special types of inverter-SCC communication.

GeorgeD1:


lolz, bro!

i hope this your frequent reference to kazeem will not anger a few ones on here who might
actually have that as their given birth name

kadorzy:

I'm interested as well

ojeysky:


My brother maybe my experience will be different from yours so let's just leave it at that.

mctfopt:


I have a Thermocool 203L freezer that takes only 110w at max but runs lower than that. I'm surprised that the freezer is that efficient and doesn't consume much.

BetaTechnicians:

Bro, please I'll like to know this agent. Can I PM you for it?

ojeysky:


My 219L has similar consumption before the local engineers (kezeems) did their magic on it and turned it to a 200w+ freezer

BetaTechnicians:

I can confirm this too, looks like it runs at around 60w or so, I'll try to confirm with a watt meter when I can.

mctfopt:


I have a Thermocool 203L freezer that takes only 110w at max but runs lower than that. I'm surprised that the freezer is that efficient and doesn't consume much.

ojeysky:


It does about 2w and if lid is opened it goes to about 10w until the compressor triggers again so as to keep it at -20.

olopan:
Like three weeks ago, a nairalander and member of this forum made contact with us on how he can get his system an online monitoring features, equalization and other features to ensure he saves power from grid usage and also run his home efficiently.

We recommended to him a Growatt 3000W hybrid inverter with 1620Wp of panels.

ceaser:


How lower does it run?

Cos I have a 203L non-inberter compressor thermocool too that start surges at around 600 watts and settles at 105w.

ceaser:


Come, is this some typo? 2 watts and 10 watts ke?! As as how? (In lateef Oladimeji's voice)

My 319L inverter compressor (rated 115w) maintains a constant consumption in the nineties once good temperature is achieved.

Although I have the "turbo switch" (that red light switch) permanently on which means that the compressor is on 24/7 or so I believe, cos I have never noticed any silence in its working. The same "turbo freeze switch" always on goes for the 203L.

Or have I been using these appliances incorrectly?

funshyboi:
Good day guys I’m planning on joining 160 and 80 watts panels on my 480 watts battery (40amps) in other to increase my harvest, which connection do you think will Be better between parallel and series

Attached are the ratings on the two panels