₦airaland Forum

Acer Entenza 5335
processor 2.2 ghz
80 gig hard disk
1 gig ram
wireless,lan,
bluetooth
and battery 2hrs
call me on 08095381635, 07035215084
48k negotiable

still avaialble

ballee4: pls how do I get the account

i have a china contact i dont get mine here in naija direct from china if u have ur contact

Seyilome: pls,what is g1 account? And its benefits?.tanx

g1 accout is for azsky ok it to make it work again call me on 08095381635 if needed

rapthugx: Some say 2K, some say 5K some 2.5K hw we go kno fake?

depend on who u believe it suppose no not be cost more than 2k but to the novice ones dey sell higher to them ok

pm me if you need g1 account it available for 2k

Dinobenson: my brother sorry for bothering u,i have a problem i feel u can help me with.i have been using srt4653 decoder to receive my tv pay channels and my friend is using srt4669.just recently here we have been asked to upgrade to srt4675 to still enjoy d stations.pls what do u think we can do,i dont even have the budget to buy another decoder.another painful thing is ,my subcription for the month is gradually going by the day,without me enjoying what i paid for.i will be greatly in ur debt if u can assist me, tank u so much.u can inbox my mail at dondinobenson@gmail.com,any assistance will be greatly appreciated.

do it back to d normal upgraded it was before

ballee4: pls gurus how do I revive my xman, it has stopped working for somedays now.

you need a new account

HI

hi

buzzz me if u need the new account tools for upgrading

PROCEDURES
Firmware upgrade:
1.Open the extracted FlashTool_v5.1308.00 folder.
2.Double click on Flash_tool software.
when it loads click on options and click on baurate,then choose 115200.click on comport and chose the comport of your computer.Still in options,click on format fat,then click ok.
3.Still on the flash tool software,click on scatter/config file,then choose the folder of gb20_0607_new_relese_V3 for g1 and 0608_release_new_V1 folder for g1+(inside each folder choose scatWS52_1632_MOD_10A for g1 or 50D_MOD_11B_BB for g1+.then click open.
4.Click download on the flash tool software and wait for 5 seconds,if it does nor start running the download,unplug the power supply of the azsky from the back and plug again.it will start running.wait until download is completed,green dialog box will be displayed.Now you are through with firmware upgrade.
ACCOUNT INSTALLATION PROCEDURE
The next stage is the account installation(in the attatchment your bin account is the one that begins with D,download and paste it in your pc desktop).
Click on the modem settings v3.0 software,select the port of your computer and choose the bin account i sent to you from your desktop(if you downloaded it into your desktop) run the software.it will show successful.
IMEI NO.INSTALLATION
Then install imei number that came with your account using the imei number tool.
IMEI INSTALLATION
Then install the apn using the apn tool,
use mtn apn:web.gprs.mtnnigeria.net,web,web for username and password respectively.This mtn apn will work for all networks.
Lastly plug your azsky dongle into your reciever and enjoy.
Any questions dont hesitate to call me. 08095381635

ALSO new account available for 2k only

Still Available

?

still available

call me

still dey

Acer Entenza 5335
processor 2.2 ghz
80 gig hard disk
1 gig ram
wireless,lan,
bluetooth
and battery 2hrs
call me on 08095381635, 07035215084
50k negotiable

still dey

dey kanpe

still available

still available

still dey

u dere

still deey

find someone here in Lagos that can come and collect it from me or will u come on Saturday and go back

yes very good work well fta

available

dey here

still dey available

still available

still dey