₦airaland Forum

Good Morning Nairalanders

...

Thank you Mrs Melody. We appreciate your patronage.

Quality Oven Baking Ltd make use of the best quality paint in the auto industry. We make use of Sikken Auto Base paint.

Good Morning Nigeria

Pleasant evening

You can send me emails on quality.ovenbaking@yahoo.com

08024246344

Visit our workshop today

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.
Oven bake technology have extraction systems and
filters, which remove atomized spray from the air.
This creates a clean, dust- free environment with
reduced overspray. The extraction system also
creates a seal around the doors of the paint booth
so that dust and other particles that might be found
in a typical traditional workshop cannot enter the
spraying area while work is in progress. If a job is
sprayed in traditional workshop conditions, dust can
contaminate the paint and ruin the integrity of your
work.
2. Oven bake technology create an ambient spraying
temperature of approximately 64 to 70 degrees
Fahrenheit. In a traditional workshop, the spraying
temperature is dependent on the local climate or
heating systems and this makes it more difficult to
maintain optimum spraying temperatures.
Professional paints are sprayed at paint booth
temperatures so that a wet, even application of
color can be achieved. If a job is painted in a
traditional workshop in conditions that are too
warm, dry patches in the paint occur. If the
temperature is too cold, paint will not cure quickly
enough and this causes it to run or sag.
3. Modern paint materials use hardeners and
reducers that are designed to dry at low-bake
temperatures of 160 to 175 degrees Fahrenheit.
Most paints dry within 30 minutes if they are
exposed to the baking temperatures inside a paint
booth. When a vehicle is painted and left to dry in
normal traditional workshop conditions, solvents
remain inactive underneath the final coat of color
and this slows down the drying process. If paint isn't
fully dry when a job is unmasked or polished,
tearing occurs and this results in the vehicle having
to be prepared and painted a second time.
4. Health and Environmental Issues The extraction
system in Oven booths reduces the amount of
volatile organic compounds that are released into
the atmosphere. Once a coat of paint has been
applied, operatives can usually return to the paint
booth without respiratory equipment within three
minutes. In a traditional workshop environment, it
can often take hours for over spray to clear. This
increases the risk of breathing in harmful
polyisocyanate materials for other workers and
increases the level of VOC emissions (Volatile
organic compound). This presents a significant risk
to the surrounding environment and violates
current health and safety legislation. Thank You And
Have a Pleasant Morning.
Note. When coming ensure that you call me, so that
i would be on ground to access your car personally
and for work to start immediately your car arrive or
rather call me on 08024246344 to book an
appointment. Thank you

Pleasant evening everyone

.....

Plot 105 mechanic village, babs animashaun road, off bode thomas junction, surulere, Lagos.

08024246344

We are professionals, We make cars look absolutely
beautiful.

Happy Sunday.

Good Morning Nigeria

We are always available to serve you.

...

Transform your vehicle this season, to a more glamorous and charming looks it deserves.

Lovely Weekend Nairalanders.

Thank you.

Thank Mrs Shadia. We appreciate your patronage.

Visit us today

Good Morning Nairalanders

...

quality.ovenbaking@yahoo.com

Xmas and New year season is here once again. Visit our workshop today.

Thank you Mrs Rashida. Quality Oven Baking Ltd appreciate your patronage.

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.
Oven bake technology have extraction systems and
filters, which remove atomized spray from the air.
This creates a clean, dust- free environment with
reduced overspray. The extraction system also
creates a seal around the doors of the paint booth
so that dust and other particles that might be found
in a typical traditional workshop cannot enter the
spraying area while work is in progress. If a job is
sprayed in traditional workshop conditions, dust can
contaminate the paint and ruin the integrity of your
work.
2. Oven bake technology create an ambient spraying
temperature of approximately 64 to 70 degrees
Fahrenheit. In a traditional workshop, the spraying
temperature is dependent on the local climate or
heating systems and this makes it more difficult to
maintain optimum spraying temperatures.
Professional paints are sprayed at paint booth
temperatures so that a wet, even application of
color can be achieved. If a job is painted in a
traditional workshop in conditions that are too
warm, dry patches in the paint occur. If the
temperature is too cold, paint will not cure quickly
enough and this causes it to run or sag.
3. Modern paint materials use hardeners and
reducers that are designed to dry at low-bake
temperatures of 160 to 175 degrees Fahrenheit.
Most paints dry within 30 minutes if they are
exposed to the baking temperatures inside a paint
booth. When a vehicle is painted and left to dry in
normal traditional workshop conditions, solvents
remain inactive underneath the final coat of color
and this slows down the drying process. If paint isn't
fully dry when a job is unmasked or polished,
tearing occurs and this results in the vehicle having
to be prepared and painted a second time.
4. Health and Environmental Issues The extraction
system in Oven booths reduces the amount of
volatile organic compounds that are released into
the atmosphere. Once a coat of paint has been
applied, operatives can usually return to the paint
booth without respiratory equipment within three
minutes. In a traditional workshop environment, it
can often take hours for overspray to clear. This
increases the risk of breathing in harmful
polyisocyanate materials for other workers and
increases the level of VOC emissions (Volatile
organic compound). This presents a significant risk
to the surrounding environment and violates
current health and safety legislation. Thank You And
Have a Pleasant Afternoon. Note. When coming
ensure that you call me, so that i would be on
ground to access your car personally and for work
to start immediately your car arrive or rather call
me on 08024246344 to book an appointment. Thank
you

Good afternoon Ladies and Gentle men

.....