₦airaland Forum

after. Once again thank you Mr Michael.

Before

micha3l: Well Done Boss. Good Job. Thank you for the professional service

Thank you Mr Michael . We appreciate your patronage, one other thing sir, hope am allowed to post pictures of your job on my thread.

For Further Enquiries, Call 08024246344, Mr
Sylva

Plot 105 mechanic village, babs animashaun
road, off bode thomas junction, surulere, Lagos.

Bake your vehicle with us today and get value

08024246344

ADVANTAGES OF USING OVEN BAKE
TECHNOLOGY.
Oven bake technology have extraction systems
and filters, which remove atomized spray from
the air. This creates a clean, dust- free
environment with reduced overspray. The
extraction system also creates a seal around the
doors of the paint booth so that dust and other
particles that might be found in a typical
traditional workshop cannot enter the spraying
area while work is in progress. If a job is sprayed
in traditional workshop conditions, dust can
contaminate the paint and ruin the integrity of
your work.
2. Oven bake technology create an ambient
spraying temperature of approximately 64 to 70
degrees Fahrenheit. In a traditional workshop,
the spraying temperature is dependent on the
local climate or heating systems and this makes it
more difficult to maintain optimum spraying
temperatures. Professional paints are sprayed at
paint booth temperatures so that a wet, even
application of color can be achieved. If a job is
painted in a traditional workshop in conditions
that are too warm, dry patches in the paint
occur. If the temperature is too cold, paint will
not cure quickly enough and this causes it to run
or sag.
3. Modern paint materials use hardeners and
reducers that are designed to dry at low-bake
temperatures of 160 to 175 degrees Fahrenheit.
Most paints dry within 30 minutes if they are
exposed to the baking temperatures inside a
paint booth. When a vehicle is painted and left to
dry in normal traditional workshop conditions,
solvents remain inactive underneath the final
coat of color and this slows down the drying
process. If paint isn't fully dry when a job is
unmasked or polished, tearing occurs and this
results in the vehicle having to be prepared and
painted a second time.
4. Health and Environmental Issues The
extraction system in Oven booths reduces the
amount of volatile organic compounds that are
released into the atmosphere. Once a coat of
paint has been applied, operatives can usually
return to the paint booth without respiratory
equipment within three minutes. In a traditional
workshop environment, it can often take hours
for overspray to clear. This increases the risk of
breathing in harmful polyisocyanate materials for
other workers and increases the level of VOC
emissions (Volatile organic compound). This
presents a significant risk to the surrounding
environment and violates current health and
safety legislation. Thank You And Have a
Pleasant Afternoon Sir.
Note. When coming ensure that you call me, so
that i would be on ground to access your car
personally and for work to start immediately your
car arrive or rather call me on 08024246344 to
book an appointment. Thank you

Good Morning people

Happy Sunday

Wishing you all a lovely Weekend

Good morning nairalander's

Quality Oven Bake Ltd car body repairs
specialists. For: accident repairs, scratch/dent
repairs and full resprays(Baking). Competitive
prices, affordable quality by dependable
professionals. Call 08024246344

Thank you Mr Ajibo. Quality Oven Baking appreciate your patronage. We are grateful for the trust you place on our company, this is your fourth car you have given us within the space of five month. Once again thank you for your loyalty.

Thank Mr Ogedi. Quality Oven Baking Ltd appreciate your patronage.

08024246344

Good Morning people

At Quality Oven Baking Ltd, we are experts at
automotive car painting. Call us on 08024246344

===

For Further Enquiries, Call 08024246344, Mr
Sylva

For those that don't have chance or the luxury of
time due to the nature of their work/job or won't
be able to locate our office easily, our driver's are
always available to assist you.
NOTE. When coming ensure that you call me, so
that i would be on ground personally to access
your car and for work to start immediately your
car arrive or rather call me on 08024246344 to

Enquiries

Where else can you get an exceptional long- lasting beauty for your car, at quality oven baking Ltd.

Thank you Mr peter pinero. Quality Oven Baking Ltd, appreciate your patronage.

ADVANTAGES OF USING OVEN BAKE
TECHNOLOGY.
Oven bake technology have extraction systems
and filters, which remove atomized spray from
the air. This creates a clean, dust- free
environment with reduced over spray. The
extraction system also creates a seal around the
doors of the paint booth so that dust and other
particles that might be found in a typical
traditional workshop cannot enter the spraying
area while work is in progress. If a job is sprayed
in traditional workshop conditions, dust can
contaminate the paint and ruin the integrity of
your work.
2. Oven bake technology create an ambient
spraying temperature of approximately 64 to 70
degrees Fahrenheit. In a traditional workshop,
the spraying temperature is dependent on the
local climate or heating systems and this makes it more difficult to maintain optimum spraying
temperatures. Professional paints are sprayed at
paint booth temperatures so that a wet, even
application of color can be achieved. If a job is
painted in a traditional workshop in conditions
that are too warm, dry patches in the paint
occur. If the temperature is too cold, paint will
not cure quickly enough and this causes it to run
or sag.
3. Modern paint materials use hardeners and
reducers that are designed to dry at low-bake
temperatures of 160 to 175 degrees Fahrenheit.
Most paints dry within 30 minutes if they are
exposed to the baking temperatures inside a
paint booth. When a vehicle is painted and left to dry in normal traditional workshop conditions,solvents remain inactive underneath the final coat of color and this slows down the drying process. If paint isn't fully dry when a job is unmasked or polished, tearing occurs and this
results in the vehicle having to be prepared and
painted a second time.
4. Health and Environmental Issues The
extraction system in Oven booths reduces the
amount of volatile organic compounds that are
released into the atmosphere. Once a coat of
paint has been applied, operatives can usually
return to the paint booth without respiratory
equipment within three minutes. In a traditional
workshop environment, it can often take hours
for overspray to clear. This increases the risk of
breathing in harmful polyisocyanate materials for other workers and increases the level of VOC
emissions (Volatile organic compound). This
presents a significant risk to the surrounding
environment and violates current health and
safety legislation.

Plot 105 mechanic village, babs animashaun
road, off bode thomas junction, surulere, Lagos.

Bake your vehicle with us today and get value

happy new month.

...

08024246344

Enquiries

Happy Sunday