₦airaland Forum

Mobile 08024246344

Goodmorning people.

Peter210: How long does it take for the whole painting and panel beating........for a sedan car......my car has no dent ,i just want to replenish the look by repainting it to the same colour (Black)

Just 48hours. Assuming we receive your car today, you will get you car back the next day. Thank you

For those that don't have chance or the luxury of time due to the nature of their work/job or won't be able to locate our office easily, our driver's are always available to assist you.

NOTE. When coming ensure that you call me, so that i would be on ground personally to access your car and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you.

Royal Roy: Good analysis Mr OvenBake. Please I want to know HOW MANY DAYS it will take to CHANGE a sedan to another COLOR, without any panel beating job to do. And will that still cost #50k?

it will take 48hours, since no body-work is involve, it will cost you N50000k. Thank you.

donfidel: Hi, how much will it cost to repray a toyota highlander and how long will it take?

It will cost N65,000 and it will take 48hours i.e 2 days.

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.

Oven bake technology have extraction systems and filters, which remove atomized spray from the air. This creates a clean, dust- free environment with reduced overspray. The extraction system also creates a seal around the doors of the paint booth so that dust and other particles that might be found in a typical traditional workshop cannot enter the spraying area while work is in progress. If a job is sprayed in traditional workshop conditions, dust can contaminate the paint and ruin the integrity of your work.

2. Oven bake technology create an ambient spraying temperature of approximately 64 to 70 degrees Fahrenheit. In a traditional workshop, the spraying temperature is dependent on the local climate or heating systems and this makes it more difficult to maintain optimum spraying temperatures. Professional paints are sprayed at paint booth temperatures so that a wet, even application of color can be achieved. If a job is painted in a traditional workshop in conditions that are too warm, dry patches in the paint occur. If the temperature is too cold, paint will not cure quickly enough and this causes it to run or sag.

3. Modern paint materials use hardeners and reducers that are designed to dry at low-bake temperatures of 160 to 175 degrees Fahrenheit. Most paints dry within 30 minutes if they are exposed to the baking temperatures inside a paint booth. When a vehicle is painted and left to dry in normal traditional workshop conditions, solvents remain inactive underneath the final coat of color and this slows down the drying process. If paint isn't fully dry when a job is unmasked or polished, tearing occurs and this results in the vehicle having to be prepared and painted a second time.

4. Health and Environmental Issues The extraction system in Oven booths reduces the amount of volatile organic compounds that are released into the atmosphere. Once a coat of paint has been applied, operatives can usually return to the paint booth without respiratory equipment within three minutes. In a traditional workshop environment, it can often take hours for overspray to clear. This increases the risk of breathing in harmful polyisocyanate materials for other workers and increases the level of VOC emissions (Volatile organic compound). This presents a significant risk to the surrounding environment and violates current health and safety legislation.

Thank You And Have a Pleasant Afternoon Sir.

Note. When coming ensure that you call me, so that i would be on ground to access your car personally and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you

CONTINUATION

emalekuo: Can you throw more light on what this oven bake technology is all about and the difference between the traditional style and the oven bake technology. If possible a pix of a completed job.

Oven bake technology is a chamber or an enclosed compartment for heating, baking, hardening or drying cars paint job in order to give it that smooth finish while the traditional style involves re-spraying or re-painting the car outdoor i.e after the painter must have finished re-spraying the car, he leaves the car to dry indoor or outdoor, during this dry process over-spraying usually occurs or contaminant like dust or debris usually struck into the clearcoat, thereby not getting that quality finish your car deserves. Using the traditional style there is a strong possibility of having to re-coat (i.e re-spraying the car for the second time) the vehicle to rectify errors. By using the traditional style a range of different problems can occur, which can ruin the final finish and alter the chemical process which help paint to bind and cure.

I WILL BE BACK SHORTLY WITH THE GAINS OR ADVANTAGES OF USING OVEN BAKE TECHNOLOGY FOR YOUR CARS..... THANK YOU.

group507: It will be nice if you can post some pictures of before and after of some of your work.

Maybe also post your direct email contact

Just saw your message this evening. I will post more pictures of our work on monday, here is our email address quality.ovenbaking@yahoo.com. Thank you.

gwoapy: Goodday pls how much would you bake a 99 toyota camry 2.2

It will cost you N50,000. Thank you.

Goodmorning Everyone

Happy Eid-el-Kabir celebration

For enquiries call 08024246344

We make defects disappear e.g scratches, big gouges, dents, chips etc

Goodmorning everybody.

Note. When coming ensure that you call me, so that i would be on ground to access your car personally and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you

We provide your car with a smooth surface.

We offer the best in modern automotive finishes.

sonety2k: Nice One , would contact you soon

Thank you sir, your words mean a lot to us. We look forward to your patronage.

Price Review
N50000 for all sedan cars (formerly N62000)
N60000 for JEEP/SUV (formerly N72000)
Our goal is to serve you better. Thank you.

Goodmorning Everybody. Hope you all had a wonderful weekend.

elveco:

How can I be of help to you sir, feel free to ask. Thank you.

American Dealer: How much for a full paint job on 2000 Honda odyssey and 2000 nNissan pathfinder...I'm a car dealer. Also how much for the front and back bumpers of Toyota Camry

Both would cost you N50000 each (Nissan pathfinder and Honda Odyssey), then about the toyota camry front and back bumpers(touches) hope the bonnet and the boot of the car are not involve. if it's only the bumpers front and back it will cost you N15,000. Thank you

igbsam: Do you do panel beating work ? Kindly inbox me samuel07us@yahoo.com Also, how much to spray 2003 Honda EOD.

Yes we do panel beating work. We charge N50,000 for 2003 EOD, i.e for sedan cars in general. But if it's an Armanda Jeep or a Land Cruiser jeep, we charge N6000 depending on the size of the jeep because it's going to consume more materials and paint. You have to bring your car to our office let's access it properly because from your message you mentioned panel beating, so I don't know whether it needs body work also. Thank you.

We look forward to your patronage

we keep your car gleaming for many years to come.

We make cars look shiny and more glamorous to the eyes.

pix

other

more

pix

Hello Everyone,
Am happy to introduce Quality Oven Baking Ltd to you all. We re-spray or re-paint cars making use of oven baking technology. At Quality Oven Baking Ltd, we ensure your car gets that "Distinctiveness of Image" it deserves. We offer the best in modern automotive finishes thereby giving your car that final appearance and durability it deserves. We take into consideration performance factors such as gloss, depth of image, flow and leveling, ease of polishing, hardness and longevity are some of the key factors we guarantee and we carry it out with professionalism and effectiveness.
At Quality Oven Baking Ltd the use of quality materials are paramount to arriving at a stunning and glamorous look for your car.
Our Address is Plot 105 Babs Animashaun Road, Mechanic Village, Surulere, Lagos.
For Enquiries Call 08024246344, 07051348099

Yours sincerely
Mr Sylva
08024246344, WhatsApp 07051348099