techmatas:
do not miss this opportunity!

techmatas:
Training strictly practical Hands on

techmatas:
Advanced Center for Engineering Career and Technology (ACECATECH) in conjunction with Rocktop Safety services Nigeria Limited present to you a practical hands on training on Electrical Control Panel Design, Installation and Maintenance.

Electrical Control panel is an integral part of Electrical and Automatic control system used in the industries to control production process or machines. It may be built around Components such as Relay, Contactor, timer, counter, breaker or around programmable devices such as PLC, PAC etc. this is a very specialized field with a very few skilled personnel albeit very high industrial demand.
Who need this training
this training is meant for Engineers and technicians of Electrical/Electronic and computer background also, scientists with good electrical/electronic background. Both fresh graduate or experienced professional who may like to gain more skills

Course Objective

At the end of this Training our trainees will be able to:
 Demonstrate good understanding of relay logic and how to apply it in solving real life control problem
 Wire up relays, timers, contactors, counters, breakers in conjunction with sensors to control electric motors, solenoid, robots, valves and other field instruments
 Troubleshoot and maintain control circuit
 Wire and configure AC and DC drive
 Wire and write PLC programs
 Demonstrate sound Knowledge of control panel design consideration such as knowing when best to use PLC based control panel or relay control panel
 Interface control panel to I/O device to match various load demand
 Upgrade a relay base control panel to PLC base control

Course module 1: Electrical Control Devices
 Operation Details of Relay, Contactor, Timer, Counter, Breaker (MCB, MCCB, ACB, SF6, etc)
 PLC and other Programmable devices
 Ac and DC drives, soft starters operation details
 Electrical Symbol and wiring diagram
 Electrical schematic and relay logic
 Practice and exercise

Module 2: control panel design and installation
 Develop wiring and schematic diagram from relay logic
 Design of control circuit using relay, contactor, timer, counter, etc
 Detail wiring of control panel and interfacing with field devices
 DOL starter, Star Delta Starter (industrial 3phase motor starter)
 Detailed component specification and sizing
 Earthing and panel cabling-standard procedure
 Practice and exercise

Module 3: PLC based control panel
 Advantage of PLC base control Panel
 Detail wiring of a PLC control Panel
 PLC Programming, downloading/uploading PLC program
 Need for Industrial motor drives
 VFD wiring and configuration/parameterization
 Upgrading a relay control panel to PLC control panel
 Practice and exercise

Module 3: Control panel Maintenance
 Electrical test equipment
 Electrical troubleshooting procedure
 Common control panel faults and solution
 PLC and Drive troubleshooting
 Electrical motor troubleshooting and maintenance
 Practice and exercise

Date for training commencement
26th Mon September, 2016.

Training fees and duration

N80,000 (35hrs/4weeks)
N/B Registration on or before Monday 12 September attracts a 20% discount! so waste no time!!


Venue: Rocktop Safety integrated Services Nig. Limited
11 East West Road Rumuokoro
Port Harcourt.

For those coming outside PH we are making available accommodation for just N10,000 for the entire duration of the program.
hurry now and get registered for our spaces are limited!

click here to register for any of these courses

We also run customize program to suit your needs

for more information call: 08160052942, 08032792323.
you may send us a mail at info@acecatech.com, or visit website acecatech.com .

www.nairaland.com/attachments/3547255_panel5_jpeg34c327046b20a617dda45abd53fecdcf

techmatas:
its on

techmatas:
get the skills; get the edge; get the job

techmatas:
Advanced Center for Engineering Career and Technology (ACECATECH) in conjunction with Rocktop Safety services Nigeria Limited present to you a practical hands on training on Electrical Control Panel Design, Installation and Maintenance.

Electrical Control panel is an integral part of Electrical and Automatic control system used in the industries to control production process or machines. It may be built around Components such as Relay, Contactor, timer, counter, breaker or around programmable devices such as PLC, PAC etc. this is a very specialized field with a very few skilled personnel albeit very high industrial demand.
Who need this training
this training is meant for Engineers and technicians of Electrical/Electronic and computer background also, scientists with good electrical/electronic background. Both fresh graduate or experienced professional who may like to gain more skills

Course Objective

At the end of this Training our trainees will be able to:
 Demonstrate good understanding of relay logic and how to apply it in solving real life control problem
 Wire up relays, timers, contactors, counters, breakers in conjunction with sensors to control electric motors, solenoid, robots, valves and other field instruments
 Troubleshoot and maintain control circuit
 Wire and configure AC and DC drive
 Wire and write PLC programs
 Demonstrate sound Knowledge of control panel design consideration such as knowing when best to use PLC based control panel or relay control panel
 Interface control panel to I/O device to match various load demand
 Upgrade a relay base control panel to PLC base control

Course module 1: Electrical Control Devices
 Operation Details of Relay, Contactor, Timer, Counter, Breaker (MCB, MCCB, ACB, SF6, etc)
 PLC and other Programmable devices
 Ac and DC drives, soft starters operation details
 Electrical Symbol and wiring diagram
 Electrical schematic and relay logic
 Practice and exercise

Module 2: control panel design and installation
 Develop wiring and schematic diagram from relay logic
 Design of control circuit using relay, contactor, timer, counter, etc
 Detail wiring of control panel and interfacing with field devices
 DOL starter, Star Delta Starter (industrial 3phase motor starter)
 Detailed component specification and sizing
 Earthing and panel cabling-standard procedure
 Practice and exercise

Module 3: PLC based control panel
 Advantage of PLC base control Panel
 Detail wiring of a PLC control Panel
 PLC Programming, downloading/uploading PLC program
 Need for Industrial motor drives
 VFD wiring and configuration/parameterization
 Upgrading a relay control panel to PLC control panel
 Practice and exercise

Module 3: Control panel Maintenance
 Electrical test equipment
 Electrical troubleshooting procedure
 Common control panel faults and solution
 PLC and Drive troubleshooting
 Electrical motor troubleshooting and maintenance
 Practice and exercise

Date for training commencement
26th Mon September, 2016.

Training fees and duration

N80,000 (35hrs/4weeks)
N/B Registration on or before Monday 12 September attracts a 20% discount! so waste no time!!


Venue: Rocktop Safety integrated Services Nig. Limited
11 East West Road Rumuokoro
Port Harcourt.

For those coming outside PH we are making available accommodation for just N10,000 for the entire duration of the program.
hurry now and get registered for our spaces are limited!

click here to register for any of these courses

We also run customize program to suit your needs

for more information call: 08160052942, 08032792323.
you may send us a mail at info@acecatech.com, or visit website acecatech.com .

www.nairaland.com/attachments/3547255_panel5_jpeg34c327046b20a617dda45abd53fecdcf

techmatas:
is on

techmatas:
is on

techmatas:
get the skills; get the edge; get the job

Khalifa04:
can we chat privately

techmatas:
Training strictly practical Hands on

techmatas:
do not miss this opportunity!

techmatas:
get the skills; get the edge; get the job