₦airaland Forum

Techcrat Industrial AUtomation and Process Control is currently conducting training on Process Engineering, seminar and short courses on refinery and Hydrocarbon Industry. our expert has 30 years in process engineering, refinery training, maintenance and setup.
for more info contact :info"techcractautomation.com or techcrat2013@gmail.com or +2348027041475



SUBJECT: LIST OF SEMINARS/SHORT COURSE TOPICS
1. Overview of Liquefied Petroleum Gas (LPG) Terminals (2 days)
2. Overview of Liquefied Natural Gas (LNG) Terminals (2 days)
3. Engineering Design Manual for Natural Gas Dehydration with Glycols (5 days)
4. Engineering Design Manual for Natural Gas Dehydration with Solid Desiccants (2 days)
5. Engineering Design Guide for Fired Heater in Hydrocarbon Industry
6. Engineering Design Guide for Burners for Fired Heaters in Hydrocarbon Industry.
7. Engineering Design Manual for Acid Gas Removal from Natural Gas by Amine Sweetening Process (4 days)
8. Overview of Oil and Gas Processing/Technology & Refining Operations and Processes (6 days)
9. Troubleshooting of Gas Processing Operations (2 days)
10. Refinery Processes Basics (2 days)
11. Refinery Process Advance (4 days)
12. Refinery Equipments, Instrumentation and Piping Basics (3 days)
13. Refinery Energy Consumption (2 days)
14. Overview of Sulfur Recovery Units & Tail Gas Treatment Units (4 days)
15. Overview of Oil and Gas Processing and Technology (3 days)
16. Overview of Refining Operations and Processes (3 days)
17. Process Equipment Types & Selection, Construction Features, Internals, Designing & Manual Sizing Calculations of, (3 days)
• Gas-Liquid (Two Phase) Separator
• Liquid-Liquid (Two Phase) Separators
18. Process Equipment Types & Selection, Construction Features, Internals, Designing & Manual Sizing Calculations of, (4 days)
• Packed Columns
• Tray Columns
19. Process Equipment Types & Selection, Construction Features, Internals, Designing & Manual Sizing Calculations of (2 days)
• Shell and Tube Heat Exchanger

20. Pressure Safety Valves (PSV) Calculations & Sizing (2 days)
21. Process Consideration in Preparation of Hazardous Area Classification, Plot Plan, Equipment Layout, Emergency & Escape Routes, Fire Fighting Equipment Location (4 days)
22. Types/Selection, Working Principles of Instruments (flow, pressure, temperature, level & others) (5 days)
23. Corrosion and Material of Construction for Hydrocarbon Industry (2.5 days)
24. Calculations procedures for Line Sizing (Single & Two Phase), Pump Hydraulics Calculations, Control Valve Hydraulics (4 days)
25. Design Manual for Chemical Injection Skids (3 days)
26. Rule of Thumbs for Chemical Engineers (3.5 days)
27. Types/Selection, Construction and Operation of pumps, compressors, fans & blowers, manual valves and control valves (5 days)
28. Distillation Columns Instrumentation & Controls Schemes (1.5 days)
29. Distillation Columns (tray/packed) pre-commissioning, commissioning, start-up and shut down procedures. (3 days)
30. Engineering Guide for Distillation Column (tray/packed) trouble shooting. (3 days)

Techcrat Automation and Control systems in partnership with Integrated Engineering Systems(Romania).

we are currently working on projects in Nigeria and Romania.

we have successfully worked and completed projects in food and manufacturing Industries as well the under listed Areas:

BUILDING MANAGEMENT SYSTEMS

Process control & monitoring

Energy costs optimization

Maintenance costs reduction

Centralized control and monitoring

Local or remote operation

VIDEO SURVEILLANCE OF CRITICAL SITES

Video surveillance
Day/night cameras
PTZ cameras
Thermal vision cameras

Video analytics
Automatic detection of incidents and alarming

Integration

Security Systems
Vehicle access control:
Barrier

Electromechanics or hydraulic road-blocker

Gravitational road-blocker for exit lanes

Hydraulic bollards.

Our training also spread across the above mentioned Projects.
for more Info, contact: Techcrat Automation and Control
www.techcractautomation.com
+2348027041475

You are invited to our first Exhibition and workshop on industrial Automation, process Control and Instrumentation. Tittled: Master trainer. It is a 3 day workshop.
This is a great opportunity to meet and lea®n more from SCADA experts, Professionals in Instrumentation, and Process Control. You will also have the oppotunity to come in contact with , canadians, indians and Americans with over 25 yrs experience in Automation and Instrumentation.
We have notified companies to come to the venue and recruit.
What do you stand to benefit?
1. Job recommendation and Placement
2. Opportunity to meet key people in the Industries( representatives from 100 manufacturing Indsustries, oil and gas etc wil be present)
3. Automatic membership into the body of Automation and Control.
4.Certificate of Attendance
Venue : shebba place Ikeja
Date: 13th-15th may 2015
Registration Deadline: 17th April 2015
Registration fee: 60,000 (3 days Lunch inclusion)
Registration after 17th April 2015 will cost 80,000
We have only made provision for 150 Engineers to be in attendance and the registration is on going!!!
It is a great opportunty to secure that job you have been pressing for.
Please Notify others including the science graduates.
For more information on registration, call : 08027041475 or email: info@techcractautomation.com
Website: www.techcractautomation.com

[quote author=adezeezo post=29743438]Register with techcrat Automation and process control limited and get your international certification in Automation and instrumentation.
@ Techcrat, all you need to do is to register with us and go through the practical training that will prepare you for the professional exams. The professional exams are:
1. International Society of Automation (ISA)
2. Siemens certification ( this certicate will grant you permission to opearate or work on any siemens Controller in the world)
You can contact us for more info:
Website: www.techcractautomation.com
Tel:+238027041475

Register with techcrat Automation and process control limited and get your international certification in Automation and instrumentation.
@ Techcrat, all you need to do is to register with us and go through the practical training that will prepare you for the professional exams. The professional exams are:
1. International Society of Automation (ISA)
2. Siemens certification ( this certicate will grant you permission to opearate or work on any siemens Controller in the world)
You can contact us for more info:
Website: www.techcractautomation.com
Tel:+238027041475

Instrumentattion, Industrial Automation and Control training with free software installation for constant practice.
Registration is on going!!!

adezeezo:
Dont waste your precious time applying for jobs you are not qualified for. Develop yourself in Instrumentation, industrial Automation, process Control and then stand a better chance of securing jobs in any country in the world. Prepare for january mass recruitment by multi National companies.
Registration for Automation and Process Control training for january batch is on going at Techcrat Industrial Automation and Process Control.we conduct training with the following controllers: Keyence, Omron, siemens, ABB, WEG, yotta, AB, Mitsubishi, ABB DCS, Honeywell DcS.
Get familiar with all kind of Controllers as well as SCADA softwares
At Techcrat,you get full practical trainining with job recommendation to our clients.
VENUE: N0 10,Peter Odili Road Portharcourt.
DATE:12-26th January 2015.
Time: 9am-3pm (full time)
3pm-7pm (part time)
Please come with evidence of payment for the training and your Laptop

Call:08027041475 for more info or visit www.techcractautomation.com

[quote author=adezeezo post=29020975]Dont waste your precious time applying for jobs you are not qualified for. Develop yourself in Instrumentation, industrial Automation, process Control and then stand a better chance of securing jobs in any country in the world. Prepare for january mass recruitment by multi National companies.
Registration for Automation and Process Control training for january batch is on going at Techcrat Industrial Automation and Process Control.we conduct training with the following controllers: Keyence, Omron, siemens, ABB, WEG, yotta, AB, Mitsubishi, ABB DCS, Honeywell DcS.
Get familiar with all kind of Controllers as well as SCADA softwares
At Techcrat,you get full practical trainining with job recommendation to our clients.
VENUE: N0 10,Peter Odili Road Portharcourt.
DATE: 1st -15th April 2015
Time: 9am-3pm (full time)
3pm-7pm (part time)
Please come with evidence of payment for the training and your Laptop

Call:08027041475 for more info or visit www.techcractautomation.com

Dont waste your precious time applying for jobs you are not qualified for. Develop yourself in Instrumentation, industrial Automation, process Control and then stand a better chance of securing jobs in any country in the world. Prepare for january m[b][/b]ass recruitment by multi National companies.
Registration for Automation and Process Control training for january batch is on going at Techcrat Industrial Automation and Process Control.we conduct training with the following controllers: Keyence, Omron, siemens, ABB, WEG, yotta, AB, Mitsubishi, ABB DCS, Honeywell DcS.
Get familiar with all kind of Controllers as well as SCADA softwares
At Techcrat,you get full practical trainining with job recommendation to our clients.
VENUE: N0 10,Peter Odili Road Portharcourt.
DATE:6th-27th july
Time: 9am-3pm (full time)
3pm-7pm (part time)
Please come with evidence of payment for the training and your Laptop

Call:08027041475 for more info or visit www.techcractautomation.com

How Do PID Controllers Work? 

Where proportional control is used to minimize the oscillation characteristic of on/off control, PID control goes that bit further to reduce errors and provide accuracy and stability in a process. It does this by using the integral action and derivative actions to eliminate control deviation errors and to manage rapid process movements. All three PID terms need to tuned appropriately for the application requirements to achieve the best control.

What is Setpoint Ramping?

Many temperature controllers have the facility to ramp their effective setpoint towards the final target value at a predefined rate. A deviation alarm is often used with this feature to check that the process is closely following the ramp. When the setpoint reaches the top of the ramp, a “soak period” begins where the setpoint is maintained at this value.
Techcrat Industrial Automation and Process Control Limited is currently recruitting Instrumentation, Automation and control Engineers as well Electrical Electronics and Computer with knowledge in Automation and industrial control for petrochemical and Oil gas company. It is an opportunity for those who want to be trained on Instrumentation, Automation and process control to enrol for the training. For more info visit :www.techcractautomation.com or call 08027041475.

We don't have instrumentation and Automation Engineers in the country, that is one of the major reason why foreigners are hijacking most of the vacancies in the country.
You can get trained by experts (uK & Indian trained instructors)on the following PLC's ; Siemens, ABB, AB, keyence, Triconex mitsubishi omron, Ge Fanuc, SCADA,HMI DCS. You can call 08027041475 for more info. Registration is On!!!

We don't have instrumentation and Automation Engineers in the country, that is one of the major reason why foreigners are hijacking most of the vacancies in the country.
You can get trained by experts on the following PLC's ; Siemens, ABB, AB, keyence, Triconex mitsubishi omron, Ge Fanuc, SCADA,HMI DCS. You can 08027041475 for more info. Registration is On!!!,