₦airaland Forum

Chinedu7:
Delete stale Tps from stale satellites. Delete about 10 and blindscan if it doesn't work delete 15 and check until it can blindscan again.

l really appreciate your quick response l thought as much

@chinedu7 my 4922a refuses to blind scan only shows insufficient tp memory. how do l correct that pls l need help on that. thanks

Chinedu7:
30 days

pls chinedu7 my AXN @76.5 is nt opening on4922 & even V-SAT 9800 auto roll, is it so on your side?

Chinedu7:
My brother, I don't know much about fabrications but the best way to fabricate is to look for a copy unless you have done it before.

thank you for being sincere l appreciate you. l will carefully follow samu's post to figure out the way to go about fabrication. thanks man

Chinedu7:
What exactly do you want me to help you with?

in samu's post he made mention of pole mount point to be @ 1/3 of the diameter of the base of the dish I.e tilt point but did nt mention how to attach the jack and at what point and how in the fabrication. if you can explain that and may be in simpler form how to go about the neck fabrication if you can

@chinedu7 pls l want to fabricate neck for my 2.4m, l read samu's post but l need more from you particularly determinig the jack mount point.

Chinedu7:
You shouldn't have problems with Apstar. Since you are using ground mount, you need to free the dish a bit to be able to move left and right. Now, standing behind your dish shift it to your right, slightly until Thaicom disappears then stop. Input 3727 V 5925, lift the dish up slowly, you will hit green.

thank you for your always on time response, one or two more, going by the solution to the problem what should be the lnb skew and l plan to motorize the dish with the information am receiving from people like you.will 24" light duty actuator do the work from east to west? and in all l have gethered on the neck fabrication l find it difficult to understand how to mount the jack to the pole , some projected the thilt to mount jack.knowing that the jack is to be mounted on the left side, does it mean the mount point should be perpendicular to the thilt or how

Chinedu7:
You shouldn't have problems with Apstar. Since you are using ground mount, you need to free the dish a bit to be able to move left and right. Now, standing behind your dish shift it to your right, slightly until Thaicom disappears then stop. Input 3727 V 5925, lift the dish up slowly, you will hit green.

thank you for your always on time response, God bless you. one more or two, going by what the solution should be what should also be the lnb skew and l plan to motorize the dish going by informations am receiving from people like you can 24" light duty jack actuator do the work from east to west without problem?, is a strong 2.4m pan dish.

Chinedu7:
Is your dish motorized or fixed?

thanks for your response, its fixed, ground mount and the lnb l use is the same with the one in one of your motorize set up, the dual ku/cband lnb.

Chinedu7:
Thaicom 3640 H 28066, Apstar 7@76.5E - 3725 V 5925

l hav ben follown ur post an u'v bn of help. kudos 2u. my challeng is unable 2 nail apstar7 with 2.4m dish in kaduna. l trackd thaicom5 using strong cband bt couldn't nail apstar7. what could be d problm