₦airaland Forum

Hp elite with CDrom, at least 2gb Ram & 250gb HDD...Do you have a laptop with that specification?

Get Mikrotik hEX Lite RB750r2 Routerboard 5-port 10/100 switch/router from digiflex: http://digiflex.com.ng
OR
Call: 08168829681

The RB750r2 (hEX lite) is a small five port ethernet router in a nice plastic case.

Its price is lower than the RouterOS license alone - there simply is no choice when it comes to managing your wired home network, the RB750r2 (hEX lite) has it all.

Not only it’s affordable, small, good looking and easy to use - It’s probably the most affordable MPLS capable router on the market! No more compromise between price and features - RB750r2 has both. With its compact design and clean looks, it will fit perfectly into any SOHO environment.

Box contains: RB750r2 in a plastic case, power supply

Get Mikrotik RouterBoard RB2011UAS complete 1 SFP port plus 10 port 10/100/1000 from digiflex online store: http://digiflex.com.ng
OR
Call: 08168829681

The Mikrotik RB2011UAS-2HnD-IN has an SFP cage for gigabit SFP transceivers and is an ideal solution for FTTH (Fiber To The Home) implementations. Its powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 128MB of RAM, built-in 2.4Ghz 802.11b/g/n 2x2 two chain wireless, and a Level5 RouterOS license. RB2011UAS-IN comes with an indoor case. The RB2011UAS-2HnD-IN has 11 ports: Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing affordable wirespeed Fiber-to-Copper converter, and additional five Fast Ethernet ports. Board can be powered by power jack or PoE. RB2011UAS-2HnD-IN supports any 1.25G SFP transceivers that is within the SFF Committee specifications for SFP Transceivers. RB2011LS doesn�t have hardware support for PON (Passive Optical Network) - this hardware support MUST be implemented on SFP transceiver itself. Note that the SFP transceiver is NOT included. All ethernet ports are fully independent and support 802.1q vlans, and advanced routing protocols including RIPv2, OSPF. and BGP4. Management from GUI or CLI with access through web, telnet, or ssh. Includes a switching DC power supply. Can also be powered on eth1 by passive POE from 18 to 28 vdc (midspan device - power on unused pairs). Level 5 RouterOS license included. An optional wall mount bracket is also available in a Wall Mount Kit.

Order Dual Core P1023 500MHz CPU, 512MB RAM, 5xGigabit Ethernet, RouterOS L5 from digiflex: http://digiflex.com.ng
OR
Cal: 08168829681

The RB850Gx2 is a five port Gigabit ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures.

The device is powered by a 500MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor.

Product specifications

Product code RB850Gx2
CPU nominal frequency 500 MHz
CPU core count 2
Size of RAM 512 MB
Architecture PowerPC
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 5
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model None
Number of USB ports 0
Memory Cards 1
Memory card type microSD
Power Jack 2
802.3af support No
PoE out No
PoE in Yes
Supported input voltage 5 V - 30 V
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor Yes
Dimensions 90mm x 115mm
Operating System RouterOS
License level 5
Antenna gain DBI No
Current Monitor No
CPU P1023NSN5CFB
Max Power consumption 8 W
SFP ports 0
SFP+ ports None
Number of chains 0
Serial port RS232

Order Mikrotik RB750UP 5-Port Switch/Router, 4 POE + 1 USB from digiflex: http://digiflex.com.ng
OR
Cal: 08168829681

Complete system

5 x ethernet 10/100 Mbit/s
Atheros 7241 CPU, 400MHz
32MB DDR SDRAM
64MB NAND
USB 2.0 Port
PoE output on port 2-5 (max. 500mA pro Port)
RouterOS L4 licence
incl. enclosure and power supply

Special Features

MikroTik RouterBOARD RB750UP can power up to 4 connected devices by passive PoE. The output voltage is the same voltage, that is applied to RB750UP and has to be between 8 and 30V. The maximum output current per port is 500mA.

MikroTik RouterOS version 5.x level 4

licence level 4
free upgrades to MikroTik RouterOS version 6.x
licence never expires
licence valid for one installation
unlimited number of interfaces
supports accesspoint (AP), wireless station/client, point 2 point and point 2 multipoint setups
RIP and OSPF and BGP support
unlimited number of EoIP tunnels
up to 200 PPPoE tunnels
up to 200 PPTP tunnels
up to 200 L2TP tunnels
up to 200 OVPN tunnels
unlimited number of VLAN interfaces
up to 200 active hotspot users
up to 20 active Usermanager sessions

Order TP-Link 8-Port 10/100Mbps Desktop Switch (TL-SF1008D) from Digiflex: http://digiflex.com.ng
OR
Cal: 08168829681

What This Product Does
The TL-SF1008D Fast Ethernet Switch is designed for SOHO (Small Office/Home Office) or workgroup users. All 8 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1008D can save power consumption, making it an eco-friendly solution for your business network.

High Performance
TL-SF1008D Fast Ethernet Switch provides 8 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. Featuring non-blocking switching architecture, TL-SF1008D forwards and filters packets at full wire-speed for maximum throughput. With 2K Jumbo frame, the performance of large files transfers is improved significantly. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1008D work reliably.

TP-Link Green Technology
This new generation TL-SF1008D Fast Ethernet Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 70% of the packaging material can be recycled.

Easy to Use
The auto features of this switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
Specifications
HARDWARE FEATURES
Standards and Protocols IEEE 802.3, IEEE 802.3u, IEEE 802.3x
CSMA/CD
Interface 8 10/100Mbps Ports, Auto-Negotiation, Auto-MDI/MDIX
Fan Quantity Fanless
Power Supply External Power Adapter(Output: 9.0VDC / 0.6A)
Power Consumption Maximum: 2.05W (220V/50Hz)
External Power Supply 100-240VAC, 50/60Hz
Buffer Size 768Kb
Data Rates 10/100Mbps at Half Duplex ;
20/200Mbps at Full Duplex
LED Indicator Power, 1, 2, 3, 4, 5, 6, 7, 8
Dimensions ( W x D x H ) 5.3*3.1*0.9 in. (134.5*79*22.5mm)
SOFTWARE FEATURES
Transfer Method Store and Forward
Advanced Functions Green Technology
802.3X Flow Control, Back Pressure
OTHERS
Certification FCC, CE, RoHS
Package Contents 8-Port 10/100Mbps Desktop Switch
Power Adapter
Installation Guide
Environment Operating Temperature: 0°C~40°C (32°F~104°F);
Storage Temperature: -40°C~70°C (-40°F~158°F);
Operating Humidity: 10%~90% non-condensing;
Storage Humidity: 5%~90% non-condensing

Order TP-Link 8-Port Gigabit Desktop Switch (TL-SG1008D) from digiflex: http://digiflex.com.ng
OR
Cal: 08168829681
What This Product Does
The TP-Link 8-Port Gigabit desktop switch TL-SG1008D provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Moreover, TL-SG1008D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1008D can save up to 80%* of the power consumption, making it an eco-friendly solution for your home or office network.

Gigabit Switch
Featured with 8 10/100/1000Mbps ports, TL-SG1008D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

Go Green With Your Ethernet
You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1008D 8-Port Gigabit Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1008D can automatically detect the link status of each port and reduce the power consumption of ports that are idle, resulting in up to an 80% reduction in power use.
Power Budget According to Cable Length
Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.

Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
* Maximum power savings when compared to a TP-LINK conventional switch, the real saving rate may vary based on the usage condition.

Order TP-Link 24-port 10/100Mbps Desktop/Rackmount Switch (TL-SF1024D) from Digiflex: http://digiflex.com.ng
What This Product Does
The 24-Port 10/100Mbps Switch TL-SF1024D provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.


TP-LINK Green Technology
This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.


High Performance
The rack-mount size steel case design, combined with a safety certified internal power supply, make the switch the most robust product, which is very cost-effective for a less than 24-user environment. Featuring non-blocking switching architecture, TL-SF1024D forwards and filters packets at full wire-speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024D work reliably.


Easy to Use
The auto features of this fast ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

Features
Innovative energy-efficient technology saves power up to 75%
Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
4.8 Gbps Switching Capacity
Store and forward Switching scheme
Auto-MDI/MDIX eliminates the need for crossover cables
Supports MAC address auto-learning and auto-aging
Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps hardware.
Plug and Play design simplifies installation
Fanless design to make sure it works quietly

Specifications

HARDWARE FEATURES
Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Interface 24 10/100Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)
Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
100BASE-TX: UTP category 5, 5e or above cable (maximum 100m)
Fan Quantity Fanless
Power Supply External Power Adapter(Output: 9VDC/0.6A)
Power Consumption Maximum: 3.19W (220V/50Hz)
Dimensions ( W x D x H ) 11.6*7.1*1.7 in. (294*180*44 mm)

PERFORMANCE
Switching Capacity 4.8Gbps
Packet Forwarding Rate 3.57Mpps
MAC Address Table 8K
Buffer Memory 2Mb
Green Technology Innovative energy-efficient technology saves power up to 75%
Transfer Method Store-and-Forward

OTHERS
Certification FCC, CE, RoHS
Package Contents 24-Port 10/100Mbps Desktop/Rackmount Switch
Power Cord
Installation Guide
Rackmount Kit
Rubber Feet
Environment Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Order Spool of RG11/U Coaxial Cable (1000') from digiflex today!; http://digiflex.com.ng
OR
Call: 08168829681

What's special about this dual shielded RG11?

Shielded RG11 coaxial cable designed for transmitting a video/Satellite signal over longer lengths of cable, making it perfect for security devices in a hospital, schools or large warehouses
HDTV capable due to the RG11�s ability to project a stronger more dependable signal
Available with either dual shields to protect from Crosstalk or interference
Pure Copper Inner Conductor

Creating a quality digital installation is the goal of every installer, so this is why many of them rely on superior RG11 coaxial cable. Its stronger signal allows for longer runs of cable, and its exceptional speed make it the perfect choice for many digital video applications, including HDTV



Specifications:
Meets MIL-C-17 standard
Description:
RG-11 coaxial cable is used in the networks of satellite and cable television
Materials:
Conductor: Copper
Dielectric: low-density cellular polyethylene
Shield: aluminum foil and copper wire braid
Jacket material: PVC (polyvinyl chloride)
Technical characteristics:
Wave impedance: 75 Ohm
Conductor diameter: 1.62 mm (0.06" (14 AWG)
Dielectric diameter: 7.11 mm (0.28"
Outer jacket thickness: 1.1 mm (0.04"
Outer cable diameter: 10.16 mm (0.4"
Shield: 0.18 mm (0.007", cover � 60% minimum, aluminium foil
Test frequency: up to 3 GHz
Voltage rating: 5000 V
Temperature range: -20�C � +80�C (-4�F � +176�F)
Weight per 1000 ft (304.8 m): 30.2 kg (66.5 lbs)
Minimum bend radius: (cabling) 114.3 mm (4.5"
Pulling tension: 117.9 kg (259.9 lbs)
Capacitive resistance: 53.1 pF/m
Signaling rate: 83%

Order for Ubiquiti Rocket M 2X2 MIMO 5Ghz Base Station from Digiflex; http://digiflex.com.ng
Or
Cal: 08168829681

Features

Ultimate in RF Performance: The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP AirMax base-station applications.

Rocket M Seamlessly Integrates with AirMax BaseStation and Rocket Antennas: Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

AirOS V: Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Order for "Router/Radio Outdoor Enclosure-Metal" from digiflex; http://digiflex.com.ng
OR
Call: 08068829681

FEATURES

Inner Dimension: 233×233×40 mm

International Protection: IP66

Specifications

Model Router Enclosure NO. F

Diamension-mm 233*233*40

Weight-Kg 2.38

Port for RJ45/PG16 1

Port for N Connector 1

Application Mikrotik Router Board

sholatech:
Pricing for the 15kva hybrid inverter?

Voltron-15KVA Solar Hybrid Inverter(VT3500-15K-Pro) is available for N1,300,000(1.3m)

Order for your "Voltron 2.4KVA Solar Hybrid Inverter (VT11-2400) from" digiflex: http://digiflex.com.ng
OR
Cal: 08168829681

General Description
Modified sinewave Hybrid Inverter with 50A PWM solar charge controller and 20A AC Charging.


* Modified sinewave AC output, wide application range;

* AC Charge current 20A adjustable

* Inbuilt with 50A PWM solar charge controller

* Three-steps intelligent charging control

* Battery reverse protection function

* Battery cable 10AWG 60cm (double line)

* Compact size fit for home use, small solar system

Specifications
MODEL: Voltron VT11-2400
Default Battery System Voltage: 24VDC


INVERTER OUTPUT
Rated Power: 2400VA/1400W

Waveform : Modifided Sine-wave

Nominal Output Voltage RMS: 230V

Output Voltage Regulation : +10/-18%

Output Frequency : 50Hz/60Hz +/-1 Hz

Inverter Efficiency(Peak): >80%

Line Mode Efficiency : >95%

Typical Transfer Time: Typical 15~20ms 40ms max


AC INPUT
Voltage: 230VAC

Selectable Voltage Range: Narrow 170~280VAC

Wide 90~280VAC

Frequency Range: 50HZ/60HZ (Auto sensing)


BATTERY
Nominal Input Voltage: 24VDC

Minimum Start Voltage: 21VDC

Low Battery Alarm: 21VDC+/-0.8V

Low Battery Cutoff: 20VDC+/-0.8V

High Voltage Cutoff : 30VDC+/-0.8V


AC CHARGER
Charger Voltage (Vbat<12.5V): 28.8VDC+/-0.4V

Charger Voltage (Vbat<12.5V): 27.4VDC+/-0.4V

Charging Current 20A�2A


BYPASS & PROTECTION
Nominal Input Frequency: 50Hz or 60Hz

Overload Protection (SMPS Load): FUSE

Output Short Circuit Protection: FUSE

Bypass Breaker Rating: 20A

Max Bypass Current: 20Amp


SOLAR CHARGER
Maximum PV Charge Current: 30A

DC Voltage: 12V/24V atuo work

Maximum PV Array Power: 150W*4 solar panels

MPPT Range @ Operating Voltage: 16~55VDC

Maximum PV Array Open Circuit Voltage: 55VDC

Maximum Efficiency: >95%

Standby Power Consumption: <2W


MECHANICAL SPECIFICATIONS
Dimensions (W*H*D): 268*260*90mm

Net Weight (kg): 3.5


OTHER
Operation Temperature Range: 0�C to 50�C

Audible Noise: 50dB MAX

Display: LED+LCD

Order for your "Voltron-15KVA Solar Hybrid Inverter(VT3500-15K-Pro)" from digiflex: http://digiflex.com.ng
OR
Cal: 08168829681

Power range 15KVA
24V/48VDC input voltage
Powerful charge rate up to 65Amp
Inbuilt pure copper transformer
Pure sine wave output
LED+LCD display
MPPT solar charge controller 120A
MPPT efficiency max 98%
50/60Hz automatic sensing
RS232 with free CD
Battery priority function
Automatically send signal to start generator
DC start & automatic self-diagnostic function
High efficiency design & "Power Saving Mode" to conserve energy
MODEL : PV35-15K Pro
Default Battery System Voltage: 48VDC

INVERTER OUTPUT
Continuous output power : 15KVA/12.0KW
Surge rating (20ms): 36.0KW
Capable Of Starting Electric Motor: 6HP
Output waveform : Pure sine wave/ same as input (bypass mode)
Inverter Efficiency(Peak) : >88%
Line mode efficiency : >95%
Power factor : 1.0
Nominal output voltage: RMS 220V/230V/240VAC(+/-10% RMS)
Output frequency: 5OHz/60Hz +/-0.3 Hz
Short circuit protection: Yes (1sec after fault)
Typical transfer time: 10ms(max) 10ms(max)

AC INPUT
Voltage: 230VAC
Selectable Voltage Range: 155~280VAC(For Personal Computers)
Frequency Range: 50HZ/60HZ (Auto sensing) 40~80Hz

BATTERY
Minimum start voltage : 20.OVDC/21.0VDC for24VDC mode (40.OVDC/42.0VDC for 48VDC mode)
Low battery alarm : 21.0VDC+/-0.3V for 24VDC mode (42.OVDC+/-0.6V for 48VDC mode)
Low battery Cutoff : 20.0VDC+/-0.3V for 24VDC mode (40.OVDC+/-0.6V for 48VDC mode)
High voltage alarm : 32.0VDC+/-0.3V for 24VDC mode (64.OVDC+/-0.6V for 48VDC mode)
High battery voltage recover: 31.0VDC+/-0.3V for 24VDC mode (62.OVDC+/-0.6V for 48VDC mode)
Idle consumption-search mode: <25W when power saver on

CHARGER
Output voltage : Depends on battery type
Charger AC input breaker rating: 63A
Max charge power rate: 1/3 Rating power
Overcharge protection S.D.: 31.4VDC for 24VDC mode (62.8VDC for 48VDC mode )
Maximum Charge Current: 100A

BTS
Continuous output power Yes Variances in charging voltage & S.D. voltage base on the battery temperature

BYPASS & PROTECTION
Input voltage waveform : Sine wave (grid or generator)
Nominal voltage: 220V/230V/240VAC
Max input AC voltage: 300VAC for 230VAC HV mode
Nominal input frequency: 50Hz or 60Hz
Overload protection (SMPS load): Circuit breaker
Output short circuit protection: Circuit breaker
Bypass breaker rating : 63A
Max bypass current 80Amp
Rated voltage: 24VDC/48VDC
PV open circuit voltage: Operational max = 145VDC temperature corrected VOC

SOLAR CHARGER
Maximum PV Charge Current : 120A
DC Voltage: 48V
Maximum PV Array Power: 6400W
MPPT Range @ Operating Voltage: 64~145VDC
Maximum PV Array Open Circuit Voltage: 147VDC
Maximum Efficiency: >98%
Standby Power Consumption: <2W

MECHANICAL SPECIFICATIONS
Mounting : Wall mount
Inverter dimensions (W*H*D): 587*414*211mm
Inverter weight (solar chg) KG: 70+2.5
Shipping dimensions(W*H*D): 750*520*310mm
Shipping weight (solar chg) KG: 72+2.5

OTHER
Operation Temperature Range: 0�C to 40�C
Storage Temperature: -15�C to 60�C
Audible Noise: 60dB MAX
Display: LED+LCD
Standard warranty: 1 year

Get 4KW True Sine wave inverter with LCD Panel from digiflex
Place your order at http://digiflex.com.ng
Or
Call: 08168829681

Main Features:
Output Power: 4Kw
Soft start capability for starting heavy loads

New power factor corrected (PFC) charging

Durable construction for long life under extreme environmental conditions

70 amp automatic three-stage battery charger (bulk, absorption, and float)

battery equalization with remote temperature sensor for increased performance

Low idle current (less than 1 watt) conserves energy when no loads are present

Built-in starting control circuits for two- and three-wire generator starting systems*

New digital display shows kilowatts (kW) when inverting and amps (A) when charging

Better thermal performance allows full output power to 50�C (122�F) without de-rating

High surge capacity starts more difficult loads and handles overload conditions reliably

Simplified controls with a snap-on cover that protects settings from being accidentally changed

Durable construction for long life under extreme environmental conditions

Application
Use to provide offgrid electricity to Home, offices, and industrial enviroment.

Fast Transfer function which make it ideal for use with personal computers, telecommunications equipment and others.

Still available

Still available

Still available

Still available

Still available

Still available

Still avilable

Still avilable

Still available

Get Ubiquiti AirRouter -HP from digiflex online store(http://digiflex.com.ng) for N22,500
Ubiquiti AirRouter 802.11n Wireless Router
Introducing Ubiquiti AirRouter, Ubiquiti’s first indoor commercial Wi-Fi Router featuring powerful AirOS features. Capable of connecting over 100 meters away at 150 Mbps speeds.
Sleek Design
AirRouter features 5 X 10/100 BASE-TX (Cat 5, RJ-45) Ethernet Ports, USB Port, and integrated antenna.
Featuring Ubiquiti’s Powerful AirOS V Firmware
AirRouter utilizes version 5 of Ubiquiti’s AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.
Go Wireless NZ includes a New Zealand / Australian 5V 2A power supply with the AirRouter.

Get Ubiquiti AirRouter 802.11g/n Featuring Ubiquiti AirOS for N12500 from digiflex online store (http://digiflex.com.ng)

Description
Integrated antennas
Supports WEP, WPA & WPA2
Includes Ubiquiti AirOS software & features
Max. indoor range: 328 ft.
Max. indoor data transfer rate: 150Mbps

Get UBIQUITI BULLETM2 HP from digiflex online store (http://digiflex.com.ng) for N39,000
Bullet M is the latest version of the popular Ubiquiti Bullet. Like its predecessor, Bullet M is a wireless radio with an integrated Type N RF connector that can be directly plugged in to any Antenna* to create a powerful and robust outdoor Access Point, Client, or Bridge.
The Bullet M features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a robust weatherproof design.
With up to 600mW of power and enhanced receiver design, the Bullet M is ideal for long-distance links, capable of 100Mbps+ real TCP/IP speeds over multi-km distances.
Zero Variable Deployment
Bullet M eliminates the need to use RF cables and requires no special antenna or tools to install. No radio card / host board issues. No RF cable quality concerns. No mechanical stability concerns. No enclosure mounting requirements. With the Bullet M, operators can just plug and go.
Integrated AirMax Technology
The Bullet M can instantly become a powerful TDMA BaseStation utilizing Ubiquiti’s breakthrough AirMax technology. With AirMax, PtMP networks can scale gracefully while maintaing high throughput and low latency performance.
Specifications


System Information
Processor Specs
Atheros MIPS 24KC, 400MHz
Memory Information
32MB SDRAM, 8MB Flash
Networking Interface
1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet


Regulatory / Compliance Information
Wireless Approvals
FCC Part 15.247, IC RS210, CE
RoHS Compliance
YES



Physical / Electrical / Environmental
RF Connector
Integrated N-type Male Jack (connects directly to antenna)
Enclosure Size
15.2 x 3.7 x 3.1 cm (length, width, height)
Weight
0.18kg
Enclosure Characteristics
Outdoor UV Stabilized Plastic
Power Rating
Up to 24V
Power Method
Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)*
Operating Temperature
-40C to 80C
Operating Humidity
5 to 95% Condensing
Shock and Vibration
ETSI300-019-1.4
M2 M5
Max Power Consumption
7 Watts
6 Watts


Range Performance
Outdoor (Antenna Dependent)
Over 50km

Still available

Digiflexng:
DESCRIPTION
MikroTik ACRPSMA flex-guide, low loss, 50cm, RPSMA cable.
A super low loss RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values. The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high-end features of this product.

PRODUCT SPECIFICATIONS
Product code: ACRPSMA
RPSMA: soldered on both ends
Inner conductor: silver-plated copper
Frequency: up to 6 GHz
Total signal loss at 6GHz: 0.59 dB (with connectors)
Matching: better than -20 dB
Suited for: outdoor use
Cable length: 500 mm (19.7′′)
Outer diameter: 4.2 mm (0.2′′)
Min. bending radius static: 8 mm (0.3′′)v
Min. bending radius repeated: 40 mm (1.6′′)
Operating temperature: -55°C to 125°C

CP-7911G

CISCO IP PHONE 7911G – VOIP PHONE

PRODUCT DETAILS
Product Type VoIP phone
Main Features Integrated Ethernet switch
VoIP Protocols SCCP
Voice Codecs G.729a, G.729ab, G.711u, G.711a
Call Services Call Hold, Message Waiting Capability
Display LCD display – monochrome
Network Ports Qty 2 x Ethernet 10Base-T/100Base-TX
Compatible Software Cisco CallManager

DESCRIPTION
MikroTik ACRPSMA flex-guide, low loss, 50cm, RPSMA cable.
A super low loss RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values. The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high-end features of this product.

PRODUCT SPECIFICATIONS
Product code: ACRPSMA
RPSMA: soldered on both ends
Inner conductor: silver-plated copper
Frequency: up to 6 GHz
Total signal loss at 6GHz: 0.59 dB (with connectors)
Matching: better than -20 dB
Suited for: outdoor use
Cable length: 500 mm (19.7′′)
Outer diameter: 4.2 mm (0.2′′)
Min. bending radius static: 8 mm (0.3′′)v
Min. bending radius repeated: 40 mm (1.6′′)
Operating temperature: -55°C to 125°C

Get MIKROTIK CA150 RB450 SERIES INDOOR CASE for N2200; http://digiflex.com.ng
Mikrotik RouterBoard CA/150, Black Aluminium Indoor Case, Works with RB450 and RB450G , 5 ethernet port punchouts and 1 serial console port .

Get Brand Rex SC-SC MM 1m cable for N2800