₦airaland Forum

hubcruz:
A

theo07:
Still available..

jze:
very sharp

FashAutos:
1.3

lekkys:
lol

kingreign:
Starting from fuel pump, trace up to fuel injectors, plugs, coils, intake system too

kingreign:
Fox the P0170 by checking for breakage in intake or MAF and throttle body area. Fix the P030x codes by running tests on plugs, nozzles and coils. Hope your engine has good compression sha.

Your P0340 should go since your car is a variable valve timed car.

weyreypey:
Call him
Or oluwaseunla

GAZZUZZ:
https://memegenerator.net/img/images/5487768.jpg

wetin I de find for Germany sef...

GAZZUZZ:
why u de cast me nah

Eddee:
Stop this, it's a rabbit hole

Eddee:
Let's start with the easy one first, where have you been getting fuel lately? I hope you didn't throw away that MAF? As for the nozzles, did you buy a complete set (direct toks - shouldn't be more than 4k), I still suspect the spark plugs and coils (a multimeter will confirm this).

Stop throwing parts at it, if you dey Lagos - carry that motor track Gazzuzz (no worry, offline him dey work Mercedes, you know see that Range Rover wer him wan sell, who you think say bin dey maintain am?)

I hope these are not the spark plugs you put in that Merc?

weyreypey:
Hard start fuel pump/filter... It can also cause misfire due to fuel starvation

shortgun:
You are welcome I just read that you've replaced nozzles and maf, I've modified my comment; focus your attention on the fuel pump and filter now.

Eddee:
A lot of things can cause your symptoms. Post the DTC you got after scanning, a bad TPS maybe

shortgun:
If multiple cylinders are misfiring check fuel pump,fuel filter,nozzles,maf.
Also check if the coils are getting electric current..
Good luck.

Eddee:
Did you replace with original Bosch or Denso spark plugs? I hope you didn't use those fake NGK. Please scan that vehicle ASAP

MorataFC:
So he left driver there
I refuse and reject poverty in y life
In JESUS name

shortgun:
Is it the same cylinder(s) that was misfiring b4 u did the cleaning that still misfires after the cleaning and plugs change?

shortgun:
I suggest u get another maf and test it...if that doesn't work u will have to change the ECM(brainbox).

DreCharles:
Hello guys. I eventually scanned the car and got these codes.

P0170..Fuel trim bank 1
P0301, P0302, P0303, P0304....Cylinder1 to 4 misfire
P0340... Camshaft Position Sensor A Circuit Bank 1 or Single Sensor

I want to believe p0170 is responsible for the cylinder misfires but I welcome any suggestions.
As for the p0170, Google search revealed air filter, air filter housing, MAF sensor as likely causes. I've changed the maf and air filter. The air filter however looks good.

Any suggestions pls?

Also how do I tackle the p0340 error. What do I look out for?
Thanks in anticipation.



Just removed plugs. All dead and buried. Lol. Please who can get me platinum spark plugs suitable for 2003 w203 c200. Location is Abeokuta, Ogun state.

HeavenlyBang:
Go to a proper shop, sir. Or go to Aunty Radu's place if you're in Lagos.

HeavenlyBang:
Timifakay, maybe?

HeavenlyBang:
Where?

HeavenlyBang:
Go to a proper shop, sir. Or go to Aunty Radu's place if you're in Lagos.