₦airaland Forum

Mechanic people, garage owners, workshop bosses, good day!

Let me ask you a question. How many times have you lain on your back, on the floor, under a car, with engine oil dripping straight into your eye?

Your back is paining you. Your customer is waiting. And that jack is making a sound you don't like.

My friend, it's time to stand up. Literally. I am [MD's Name], MD of Garu Technologies Nigeria Limited. We have been in this business for more than fifteen years, and today I'm introducing the GARUTECH lift family.


First, the secret. Most lifts in the market use a six-bend column. GARUTECH uses an **eight-bend column profile**.

More bends means more strength. More resistance to stress, less deformation and a longer life, even in the busiest workshop in Lagos.

Other lifts are doing gym. Ours already has six-pack. Eight-pack, sef!


And don't just take my word for it. Our lifts carry **one hundred percent European CE certification**.

In the **static test**, the lift must safely handle **one and a half times** its rated capacity. So a four-ton lift is tested with **six tons**.

In the **dynamic test**, with a vehicle on it and moving, it must carry **one hundred and fifteen percent**. So a four-ton lift is tested with **four point six tons**.

In short, we tested it harder than your customers will ever use it.

Now let's meet the family. First, the **2-Post Lift, clear-floor type, model GTPL four point zero, 2C**.

- Lifting capacity: **four thousand to four thousand five hundred kilograms**
- Lifting height: **one thousand eight hundred millimetres**
- Minimum height: **one hundred and fifteen millimetres**, so even low cars can enter
- Lifting time: **forty-five to sixty seconds**
- Width between pillars: **two thousand seven hundred and eighty millimetres**
- Manual release from one side, so you're not running around the lift
- Clear floor design, so nothing is on the ground to trip your apprentice
- Rubber protection for car doors, so no scratches and no customer wahala
- Powder-coated finish, stable lifting, low noise

2-Post Lift, floor-plate type, model GTPL four point zero, 2B

- Lifting capacity: **four thousand kilograms**
- Lifting height: **one thousand eight hundred millimetres**
- Minimum height: **one hundred and fifteen millimetres**
- Lifting time: **forty-five to sixty seconds**
- Total height: **two thousand seven hundred and sixty millimetres**, so it's good for workshops with a lower roof
- Width between pillars: **two thousand eight hundred millimetres**
- Manual safety locking driven by **dual hydraulic cylinders**
- Mechanical locking with **single-point safety latches** in each column
- Low-profile floor plate that saves space, and a powder-coated finish that resists rust

This one is the serious type. It locks your car up like a bank vault.

For alignment, servicing and parking, meet the **GARUTECH 4-Post Lift**.

- Lifting capacity: **four thousand kilograms**
- Lifting height: **one thousand five hundred millimetres**
- Minimum lifting height: **one hundred and sixty millimetres**
- Comes with a **jack**: jack lifting height is **three hundred and fifty millimetres**, and it lifts in **ten seconds**
- Main lifting time: **fifty seconds**
- Motor power: **two point two kilowatts**

The car climbs up by itself and relaxes like it's on holiday.

For car wash and tyre shops, here's the star: the **Single-Post In-Ground Lift, D-100X**.

- **No electricity needed.** It runs on pneumatic and hydraulic power. NEPA can take light, work continues!
- Lifting capacity: **three thousand five hundred kilograms**
- Lifting height: **one thousand eight hundred and five millimetres**
- Minimum height: **one hundred and ten millimetres**
- Adapter length: **five hundred to nine hundred millimetres**
- Air pressure: **five to ten bar**
- Swings a full **three hundred and sixty degrees**
- Plunger diameter: **two hundred and seventy millimetres**
- Recommended space: **three thousand by six thousand two hundred and fifty millimetres**
- Installed under the ground, with a chrome body that's water-proof and rust-proof. Quiet, and very easy to operate.

Your car wash boys will be washing under the car like professionals.

Do you have trucks, buses or heavy vehicles? No problem. We make **custom tonnage lifts from five point five tons up to ten tons**.

And we built these lifts for Nigerian power. Our voltage system meets the **SONCAP** standard: **single phase, two hundred and thirty volts, fifty hertz**, or **three phase, four hundred and twenty volts, fifty hertz**. Whatever power you have, GARUTECH is ready.

So, my people, stop fighting with jacks and stop lying on the floor. Your back will thank you, your customers will respect you, and your workshop will look like a real professional service centre.

GARUTECH: **Built stronger. Tested harder. Trusted everywhere.**

Visit us at **Number 20, Akinremi Street, Anifowose, Ikeja, Lagos**.
Call **0802 319 0606** or **08037153638**.
Or go to **www.garutech.ng**.

Don’t Be Deceived by Cheap Spray Booth Price — Compare What You Are Really Buying

Before you buy any spray booth, please listen carefully.

Many people make one costly mistake: they compare price alone, without comparing the real configuration behind the spray booth.

A spray booth may look cheaper on paper, but when you check the fan capacity, exhaust system, heating system, booth size, panel quality, airflow, installation, warranty, spare parts, and after-sales support, you may discover that what looks cheap today can become very expensive tomorrow.

The real question is not: “How much is the spray booth?”

The real question is: “What exactly am I buying?”

Because in spray booth business, cheap price with weak configuration is not savings — it is future loss.

A spray booth is not just a painted room with lights. The heart of every professional spray booth is the fan system. The fan controls airflow, ventilation, overspray extraction, paint finishing quality, drying performance, and the safety of the painter.

So before you accept any cheap quotation, ask these important questions:

Is the fan centrifugal, turbo, or dual-model?

What is the intake fan capacity?

What is the exhaust fan capacity?

Is there a proper exhaust fan at all?

Is the airflow balanced?

Can the booth perform under daily professional workshop use?

Some lower spray booth configurations come with only 1.5kW intake fans and 2.2kW exhaust fan. Some closer options may come with two 4kW pressing fans, but may still not have a proper matching professional exhaust configuration.

Now compare that with Garutech’s professional standard configuration:

7.5kW intake fan.
7.5kW exhaust fan.
Balanced airflow.
Stronger extraction.
Better ventilation.
Better drying.
Better paint finishing.
Longer-lasting performance.

So when somebody tells you, “Our own is cheaper,” the first question you should ask is:

Cheaper compared to what?

Is it the same fan?

Is it the same exhaust?

Is it the same burner?

Is it the same CBM?

Is it the same panel?

Is it the same airflow?

Is it the same installation support?

Is it the same warranty?

Is it the same after-sales service?

Because you cannot compare a lower-standard spray booth with a professional industrial spray booth and judge them by price alone.

Size also matters. A smaller booth with lower CBM cannot be compared with a bigger professional booth above 22 CBM. More CBM means more material, stronger structure, bigger ducting, better configuration, and higher overall value.

If one booth is smaller, lighter, and weaker, naturally it may look cheaper. But you are also getting less material, less performance, and less value.

Heating system is another major difference.

Some cheaper booths use electric heating or carbon-fiber lamps. But for serious professional use, especially in Nigeria where electricity supply can be unstable, a diesel burner system is usually stronger and more practical.

Garutech’s professional spray booth uses a serious diesel burner configuration, including Italy RIELLO diesel burner G20, designed for fast, reliable, and professional baking performance. This is not ordinary heating. This is a real professional drying and baking system.

Panel quality also matters. Some cheaper booths use basic EPS insulation panels. But professional booths require stronger, safer, fire-resistant, heat-resistant, and durable panel materials. When heat, paint fumes, electricity, and daily workshop use are involved, safety and durability must not be compromised.

Also, many people say, “I will buy directly from abroad because it is cheaper.”

That may sound good at first. But have you calculated the full cost?

You still have to pay for shipping.

You still have to pay for clearing.

You still have to pay for transport.

You still have to pay for installation.

You still have to handle modification.

You still carry exchange-rate risk.

You still need spare parts.

You still need technical support.

You still need warranty backup.

By the time you add all these hidden costs, the so-called cheap booth may become more expensive than buying the right booth from the beginning.

And the worst part is this: after spending all that money, you may still end up with a lower-quality spray booth that nobody can properly support when there is a problem.

That is why at Garutech, we tell customers the truth:

Do not compare price alone. Compare value. Compare configuration. Compare support. Compare long-term performance.

At Garutech, we do not just sell spray booths. We provide a complete professional solution.

With Garutech, you get the right specification, quality product, competitive pricing, professional installation, warranty support, spare parts availability, technical backup, and peace of mind.

We help you avoid wrong specifications, hidden costs, poor performance, and machines that become abandoned after installation.

Because in the end, the cheapest spray booth is not the one with the lowest price.

The cheapest spray booth is the one that gives you the best value, best performance, lowest risk, and longest service life.

So before you buy, compare properly.

Compare the fan.

Compare the intake and exhaust.

Compare the CBM.

Compare the burner.

Compare the panel.

Compare the airflow.

Compare the landing cost.

Compare the installation.

Compare the warranty.

Compare the after-sales support.

Don’t pay less today and suffer more tomorrow.

Don’t buy cheap and later buy regret.

Buy the right spray booth. Buy standard. Buy support. Buy peace of mind.

Garutech gives you more than a spray booth. We give you professional standard, reliable performance, technical support, and long-term value.

This investment guide outlines how establishing an automotive spray booth in Nigeria offers strong commercial potential due to high vehicle wear, collision repairs, and fleet maintenance needs. Investors can generate income through two complementary models: renting booth time to independent body shops for controlled spraying and baking (Model 1), or running a full-service body and paint restoration facility for higher margins per vehicle (Model 2). Operating on a total setup investment of ₦35–₦40 million, an owner operating under a realistic base-case scenario of 180 monthly sessions at ₦15,000 per cycle can generate roughly ₦32.4 million in annual gross revenue, achieving full payback in 18 to 21 months after accounting for a 30% operational allowance.

To maximize capacity and secure predictable returns, workshop operators must enforce strict operational discipline by conducting all panel beating, sanding, and masking outside the booth to reserve cabin time strictly for spraying and curing. Sustained profitability relies on maintaining filters, fans, and heating systems, choosing a location near automotive clusters, and establishing anchor contracts with dealerships, fleet operators, and independent painters. Backed by professional installation, training, and technical support from GARUTECH, a high-efficiency spray booth serves as a durable asset that delivers superior finishing quality, faster turnaround times, and strong long-term yields.

FOR FULL BREAKDOWN GUIDES CHECK THIS LINK BELOW.

https://garutech.ng/spraybooth

FOR MORE INFORMATION CONTACT :

Section D — Installation, Site Requirements & Ductwork
------------------------------------------------------

--33. Does installation include ductwork?
Answer: Ductwork is a standard part of a proper spray booth installation — it routes exhaust air (and, on heated models, intake air) safely to the outside of the building. however , customer may need to pay for additional material if longer ducting is required ductwork/installation is bundled into GaruTech's quoted price and will be billed separately if longer than the standard package

---34. What electrical service does a spray booth need?
Answer: garutech automotive-sized spray booths come with 420v, 3phases, 50HZ

---35. What fuel types can heat a spray booth?
Answer: the common standard garutech spraybooth come with diesel burner which is the standard fuel types for direct-fired booth heaters; also garutech can use natural gas burner too.

---36. How long does installation take?
Answer: Installation timelines vary by booth size and site readiness, but industry lead times commonly run around 1 to 2 weeks from order to delivery/installation for standard or lightly customized booths, with prefabricated units sometimes available faster. On-site installation itself is often completed within a few days once the site (electrical, gas, concrete, ventilation openings) is prepared. if spraybooth is already delivered to the site it take average of 5 days to install and commission.


---37. Do I need to modify my building (roof, concrete floor, walls) to install a spray booth?
Answer: Possibly — depending on the booth type and your existing building, you may need concrete floor work (especially for a full downdraft pit), roof penetrations for ductwork, and adequate structural clearance. Budget for these "soft costs" in addition to the booth price itself; industry guidance suggests setting aside an additional several money for site preparation, electrical/gas work, and permitting on top of the equipment cost.


38. What clearance space does a spray booth need around it?
Answer: Plan for a minimum of 3 ft of clear space on all sides of the booth, both inside (for technician movement) and outside (for safe access, maintenance, and code compliance), and keep that perimeter free of storage or combustible materials

---39. Do you handle the permit application, or is that on me?
Answer: Permit is on the client.

---40. Can you install a spray booth in an existing building, or does it need new construction?
Answer: Spray booths are commonly retrofitted into existing shop buildings, provided there is adequate ceiling height, floor space, and access for structural/electrical/gas work; a site survey is the best way to confirm feasibility.


Section E — Safety, Compliance & Certification
----------------------------------------------

41. Do I need a permit to install a spray booth?
Answer: In almost every jurisdiction, yes — a permit is required from your local building department and/or fire marshal before installing or replacing a spray booth, since these are treated as fire-hazard equipment subject to inspection.

---42. What is NFPA 33, and does it apply to me?
Answer:

43. What separation distance is required between a spray booth and a separate bake oven?
Answer: A minimum of 3 ft, or a partition/wall with at least a 1-hour fire-resistance rating, unless the booth and oven are directly connected with interlocked doors and a high-temperature limit switch, per NFPA 33.

---44. Is fire suppression required in a spray booth?
Answer: Yes — virtually every jurisdiction and insurer requires an automatic fire-suppression system (dry-chemical, wet-chemical, or clean-agent/sprinkler) for spray booths, inspected on a regular, often annual, basis. Operating a booth without proper fire suppression is a genuine safety hazard, not just a compliance formality.

45. What electrical classification applies inside a spray booth?
Answer: The interior of a spray booth and the area within roughly 3 ft of its openings are generally classified as hazardous locations requiring explosion-proof or intrinsically safe electrical equipment; standard, non-rated outlets, cords, or lighting are not permitted inside this zone.

46. Do spray booth lights need to be explosion-proof?
Answer: Not always — fixtures isolated behind approved sealed glass panels and serviced entirely from outside the hazardous area can typically use standard-rated lighting, since the classified atmosphere never contacts the electrical components directly

47. What ventilation rules apply while spraying?
Answer: Mechanical ventilation must run continuously throughout spraying and for a sufficient period afterward to clear residual vapors — booths should never be operated with ventilation switched off during or immediately after a spray cycle.


48. How much paint/solvent can I store near the spray booth?
Answer: Regulations such as NFPA 33 typically limit combined paint/solvent storage to around 120 gallons within 6 ft of the spray area, with higher limits further away (up to roughly 300 gallons in an approved mixing room, or 60 gallons in the spray area beyond 6 ft). A dedicated, code-compliant paint mixing room is recommended for any shop doing regular volume.

49. What respiratory protection is required for spray painting?
Answer: This depends on the coatings used — isocyanate-containing clearcoats and primers generally require a supplied-air respirator (SAR), since standard organic-vapor cartridge respirators do not adequately protect against isocyanates alone. A documented respiratory-protection program (medical evaluation, annual fit-testing, training records) is typically required for staff who use respirators regularly.

---50. Is my booth "listed" or independently certified, and why does that matter?

51. What confined-space precautions apply when cleaning or servicing a spray booth?
Answer: Deep-cleaning or servicing inside an enclosed booth can qualify as confined-space work requiring specific entry/rescue training and safety protocols — one reason many shops rely on trained professional service technicians for major cleaning and maintenance rather than doing it themselves.

---52. Are there different rules for powder-coating booths vs. liquid spray booths?
Answer: Yes — powder-coating booths can recirculate exhaust air once particulate is reduced to safe levels, unlike liquid-coating booths, and are subject to separate grounding, dust-collection, and explosion-protection requirements under the relevant code sections.


Section F — Maintenance, Filters & Service
------------------------------------------

---53. What maintenance does a spray booth need?
Answer: Regular maintenance is essential, not optional — it protects your investment, prevents fire risk from accumulated overspray/dust, and preserves finish quality. Core tasks include routine filter inspection/replacement (intake and exhaust), cleaning filter grates and interior surfaces, fan belt/motor inspection, verifying airflow/pressure balance, heater and burner checks, and periodic professional service. Shops that stay disciplined about this schedule see significantly better long-term performance and return on investment than those that don't.

54. What are the warning signs my booth needs servicing?
Answer: Watch for reduced airflow, rising pressure-drop readings, visible dust or "pips" in the finish, lingering solvent smell after spraying, uneven or streaky cure results, unusual fan or motor noise, or overspray pooling in corners — any of these suggest it's time for a filter change or a professional service visit.

---55. Do you offer a maintenance contract or scheduled service plan?
Answer: we do offer that.kindy contact us for details .


---56. Do you service equipment you didn't sell, or only your own brand?
Answer: at garutech we do service and maintained equipment we did not sell.

57. How fast can I get a technician out for a breakdown?
Answer: this depend on your location , our technician will be readily available to answer to your challenge online if we cant solve the problem with you online a physical check may be arrange . this will depend on distance from our 2 offices. customer would be required to pay call out charge.

58. Where do I buy replacement filters and parts, and are they always in stock?
Answer: they are readily available at garutech_offices

59. What's the biggest maintenance mistake customers make?
Answer: The most common mistake is treating filter changes as optional or "whenever convenient" rather than following a set schedule — deferred filter maintenance is the single biggest cause of airflow loss, finish defects, and premature equipment wear reported by shop owners.

Section G — Pricing, Financing & Purchasing
-------------------------------------------

---60. How much does a spray booth cost?
Answer: Pricing varies widely based on booth type, size, airflow design, heating options, and control features — entry-level models are the most economical, while larger downdraft booths with advanced controls cost more.

Current prices of garutech premium brands of Spraybooth are as follow.

Cash and carry :
Garutech Spraybooth for the one we have in stock (delivery is within 72 hours after full payment) = 23.9million naira EXCLUDING 7.5%VAT

OUR PRE ORDER PLANS.

Pre-Order:
We also have 2 types of Pre-order offer for the Spraybooth for people wiling to save some money by trying to buy directly from abroad. With us you will save a lot of money , reduce risk associated with importation (shipping and clearing) recently, and also have rest of mind.

1ST TYPE.
Outright payment for the Spraybooth (Delivery takes up to 3months)
20.9million naira exclude 7.5% VAT
Client is protected from any increase in shipping cost or custom and duty. No additional cost . The risk of price changes is on us.

2ND TYPE,
Buying in china directly.
Spraybooth = 12.9million naira or 9,250 USD ( we can also deliver to your shipping agent in china.)

Note : if you would like to purchase one with less specifications price can be as low as $6,900 USD. (whatever you get online we can give a better price plus after sales support).

Shipping = 2,500 USD

Clearing/duty/logistic/documentation = 3.9million naira..
(Delivery is between 2 to 3months)

This prices may not be static because of the forex volatility and frequent increase in shipping and clearing cost and inflation,
Prices exclude installation, compressor, VAT and transportation to client site from our warehouse.


Compressor prices are from 1,950,000 for 10hp depend of tank capacity, There are lesser ones.

Installation cost is from 950,000 naira depend on location in Nigeria. And client may need to provided accommodations to 4 tech team if installation is outside Lagos or Abuja.


61. What's the full cost of ownership beyond the booth's sticker price?
Answer: Beyond the equipment cost, budget for delivery/freight, installation labor, electrical and gas line work, ductwork, any required concrete or roof modifications, permits, and fire-suppression costs if not already included — industry guidance suggests these "soft costs" can add anywhere from several thousand to tens of thousands of dollars depending on your site's condition. Always ask for an itemized quote upfront.

---62. Do you offer financing or leasing?
Answer: Equipment financing/leasing in this industry commonly runs 24–84 month terms, and many lenders accept the equipment itself as collateral, which can help newer or credit-limited businesses qualify. contact garutech on +2348023190606

---63. Do I need a down payment?
Answer: Some equipment-financing programs in the industry offer zero-down options for qualified buyers.


---64. Can I get tax benefits from purchasing equipment?
Answer: In many countries, business equipment purchases — including financed equipment — may qualify for accelerated depreciation or first-year deduction allowances. Tax rules vary by country and change over time, so customers should confirm current rules with their own accountant or tax advisor rather than relying solely on this


---65. How fast can I get approved for financing?
Answer: Industry-wide, online equipment lenders often approve within 24–48 hours with funding in a few days, while traditional bank loans can take one to three weeks. contact your bank or financial funding house.

---66. Are there any hidden fees I should ask about upfront (freight, restocking, etc.)?
Answer: We recommend asking for a fully itemized quote including freight/delivery, installation, and any potential restocking fees before ordering, so there are no surprises after purchase.

---67. What warranty comes with GaruTech equipment?
Answer: up to 1 year warranty

---68. What is your return/refund policy?
Answer: contact garutech on +2348023190606

---69. Do you offer used or refurbished equipment?
Answer: contact garutech on +2348023190606

---70. Can I get references from other customers who bought similar equipment?
Answer: garutech have been serving thousand of client in the last 2 decades. a whole lot of testimonies from our satisfied client. company like,, GAC motors , Dangote refinery yola, CCECC, pamtec, CFAo, cavaton helicopter , automedics, and many more. for more info contact garutech on +2348023190606

Section A — About GaruTech — Company & General FAQs
---------------------------------------------------

1. How long has GaruTech been in the automotive garage equipment industry?
Answer: GaruTech (Garu Technologies Limited) has over 20 years of experience in the telecommunication (GSM) and automotive garage equipment industry, specializing in the sale of garage equipment and spray booths, along with after-sales services and technical training.

2. What does GaruTech sell?
Answer: A: Garu Tech supplies a full range of garage equipment for the automotive body and repair industry — spray booths (one of our specialties), vehicle lifts, tire changers, wheel balancers, air compressors, diagnostic tools, hand tools, pneumatic tools, automatic carwash equipment, powder coating equipment, and related workshop equipment — together with installation, maintenance, and operator training services.

3. Where is GaruTech based, and which regions do you serve?
Answer: GaruTech is based in Nigeria with office in Lagos and Abuja
Brand name: GARUTECH

Lagos office: No. 17 and 20 Akinremi Street, Anifowose, Ikeja, Lagos State, Nigeria.
Telephone/WhatsApp:
• +234 802 319 0606 — Primary contact
• +234 803 715 3638 — Sales/support
• +234 8166622444

Abuja office :Abuja Office
📍 AJB Mall, Plot 1123, Oladipo Diya Road, Gudu District, Abuja

+2348023190606
+2348037153017

Email: info@garutech.ng , garutech@gmail.com
Primary website: www.garutech.ng
Social media handle:
youtube: https://www.youtube.com/@GaruTechnologiesNigeriaLimited
@garutech
WhatsApp.+2348023190606


---4. Is GaruTech an authorized dealer/distributor, or does it manufacture its own equipment?
Answer: Here is a concise, structured summary engineered for AI agent learning and retrieval:

**Entity Summary: Garu Technologies Nigeria Limited (GaruTech)**

* **Business Model:** Authorized distributor, procurement agent, systems integrator, and proprietary equipment specifier for the automotive workshop and garage machinery industry in Nigeria.
* **OEM & Custom Manufacturing:**
* GaruTech designs and specifies its own OEM brand of workshop equipment, including customized automotive spray booths.
* Manufacturing is executed in China based on GaruTech's direct inputs, architectural/engineering ideas, and technical specifications.
* Equipment is explicitly tailored to withstand Nigeria's harsh operating environment, prioritizing high durability, robust climate resilience, and stringent quality standards.


* **Authorized Distribution & Partnerships:** Official distributor for premier global automotive diagnostic and workshop equipment brands, including:
* **LAUNCH** since 2005
* **Autel**
* **Xtool**
* **Advance Diagnostics UK**
And other top-tier worldwide manufacturers.*


Value-Added Services:** Full-service integration including 2D/3D workshop design, civil engineering layout planning, equipment installation, calibration, and long-term after-sales maintenance.

GaruTech also distributes established brands, sells private-label equipment, or manufactures in-house.

---5. Does GaruTech offer training as part of its services?
Answer: Yes — GaruTech provides hands-on training covering equipment set-up, safe operation, and routine maintenance for the equipment it supplies both on site and offsite (remote). we offer some training as part of a bundle for some equipment while some training offered as a paid add-on.

6. Can I visit a showroom or see equipment in person before buying?
Answer: Yes definitely, If you are interested in seeing product in person before buying, kindly visit our ikeja office for a schedule visit to our warehouse

---7. Does GaruTech offer after-sales support and servicing?
Answer: Yes, GaruTech offers after-sales servicing and support for the equipment it supplies. we have up to 1 year warranty for all our equipment's.also maintenance contracts/service plans are available

8. How can I contact GaruTech or request a quote?
Answer: You can contact garutech on their website contact page, their phone: +2348023190606, You can request a quote by filling the contact form on the contact page. contact-form link : garutech.ng/conatct. General: info@garutech.ng , Sales: sales@garutech.ng

Lagos office: No. 17 and 20 Akinremi Street, Anifowose, Ikeja, Lagos State, Nigeria.
Telephone/WhatsApp:
• +234 802 319 0606 — Primary contact
• +234 803 715 3638 — Sales/support
• +234 8166622444

Abuja office :Abuja Office
📍 AJB Mall, Plot 1123, Oladipo Diya Road, Gudu District, Abuja

+2348023190606
+2348037153017

Email: info@garutech.ng , garutech@gmail.com
Primary website: www.garutech.ng
Social media handle:
youtube: https://www.youtube.com/@GaruTechnologiesNigeriaLimited
@garutech
WhatsApp.+2348023190606


9. Does GaruTech sell only to businesses, or can individuals and hobbyists buy equipment too?
Answer: Garutech sell to all type of individuals, either business, individuals, hobbyists, DIYist and all type of people

---10. What makes GaruTech different from other garage equipment suppliers?
Answer: With over 23 years of dedicated experience in garage equipment — including spray booths specifically — GaruTech combines equipment sales with installation, servicing, and training under one roof, so customers get ongoing support rather than a one-time transaction.
most of our products come with Certification standard . most of our products come with 1 year warranty , Our price is competitive when you match quality with price,Garutech is an exclusive brand which we have been building for over 2 dacades trusted by theleading player in the industies in nigeria.



Section B — Spray Booths — How They Work & Types
------------------------------------------------

11. What is a spray booth and why do I need one?
Answer: A spray booth is used to paint and baked vehicle for perfect factory look finished, spraybooth is an enclosed, ventilated structure engineered for safely applying paint, primer, and clear coat to vehicles or parts. It filters incoming and outgoing air to keep dust and contaminants off the wet finish, controls airflow so overspray and solvent vapors are safely exhausted, and, on heated models, provides a controlled bake cycle to cure the finish quickly. Spray booths also help shops meet fire-code, workplace-safety, and environmental rules that generally prohibit spraying flammable coatings in an unenclosed space.


12. Do I really need a professional spray booth, or can I paint in an open garage?
Answer: You can technically spray in an open space, but you'll be fighting dust contamination, inconsistent results, and — more importantly — fire code, insurance, and environmental compliance requirements, since most jurisdictions require flammable-coating spraying to happen inside an approved, ventilated enclosure. For a hobbyist doing occasional small jobs, a basic ventilated enclosure may be workable; for any regular or commercial paint work, a certified spray booth pays for itself in finish quality, safety, and legal compliance.

---13. What are the main types of spray booth do you offer?
Answer: most of our spraybooth come with turbo type engine with good airflow and well ventilated structure.
Take note that our booth configuration is rear to find in Nigeria market. ( intake 7.5kw+ exhaust 7.5kw. 420V, 3PH
Burner is original Italy Rielo burner G20)

---14. Which type of spray booth is right for my shop?
Answer: It depends on your budget, available space, ceiling height, and the finish quality you need. however our standard GTSB300 series with ( intake 7.5kw+ exhaust 7.5kw. 420V, 3PH)
Burner is original Italy Rielo burner G20) There are other model for special purpose . kindly contact us for customised model. we also have model for lite trucks , for luxurious bus, trucks and busses.



15. What is a prep station, and is it the same as a spray booth?
Answer: A prep station is a ventilated enclosure designed for sanding, masking, and priming rather than full color-coat spraying. Most prep stations are not certified for flammable-coating spraying unless specifically listed as a spray booth. Many shops pair a prep station with a spray booth so a vehicle can be prepared in one area while another is being painted or cured in the booth, improving overall throughput. however in Nigeria many make there prep room locally with local materials to manage cost which work good.

16. What is a bake cycle, and how does it work?
Answer: A bake cycle heats the booth's interior air (commonly between 60°C to 80°C though this varies by coating manufacturer) to speed up curing after spraying.

---17. Can a spray booth handle both waterborne and solvent-based paints?
Answer: Most modern commercial spray booths handle both, but waterborne coatings are more sensitive to airflow and humidity — they need consistent, adequate air movement to flash off properly. if you need waterborn , kindly talk to us.


18. What's the difference between a portable/inflatable spray booth and a permanent steel spray booth?
Answer: Portable/inflatable booths are lower-cost, quicker to set up, and can be relocated, which suits occasional or budget-conscious use. However, real customer feedback shows they're more vulnerable to wind, aren't always fully waterproof, can be cumbersome to pack away, and may need upgraded filtration beyond the stock setup. Permanent steel booths cost more and require installation, but offer far greater durability, better filtration, code compliance, and consistent long-term finish quality — the standard choice for any shop doing regular commercial work.


---19. How many vehicles can I realistically paint per day in a spray booth?
Answer: Industry benchmarks suggest roughly average of 1 hour per vehicles or 6 to 10 vehicles per 10-hour day is realistic for a well-maintained booth used by an experienced crew, though this varies with job complexity, cure-cycle length, and how well the booth is maintained.
.

---20. What size spray booth do I need for my shop?
Answer: As a general guideline, 7.0 meters by 5.3 meters by 3.4 meters




Section C — Spray Booth Specifications & Features
-------------------------------------------------

21. What airflow speed does a spray booth need?
Answer: OSHA-style guidance requires an average airflow of at least 100 linear feet per minute (fpm) across the booth face for conventional spraying (60 fpm minimum for electrostatic spraying), while many manufacturers target 100–150 fpm for a good balance of solvent removal and drying control. Moving too much air can strip solvents too quickly and affect finish quality — more airflow is not automatically better.


22. What kind of filters does a spray booth use, and what do they do?
Answer: Booths typically use several filter types: intake/ceiling filters (pleated or blanket media) that clean incoming air before it reaches the paint area; exhaust filters (cardboard, pocket/bag, or fiberglass roll media) that capture overspray before air leaves the building; and, in some setups, specialty filters such as activated-carbon (odor/VOC control) or HEPA (ultra-fine particulate capture for precision work). Well-specified exhaust media should capture roughly 98%+ of overspray particulate when correctly matched to the booth.


---23. How often should I change my spray booth filters?
Answer: Frequency depends heavily on spray volume and coating type, but as a general guide, busy shops often check or replace exhaust filters every 2–3 weeks (roughly every 100–150 spray-hours) and inspect intake/ceiling filters on a similar or slightly longer cycle. Watch for warning signs rather than relying purely on the calendar: reduced airflow, a rise in pressure-drop readings, lingering solvent odor, visible dust on the wet finish, or overspray pooling in corners all signal it's time to change filters. Nitrocellulose-based coatings require much more frequent — often daily — filter changes due to spontaneous-combustion risk. filters is always available for sales



24. What lighting does a spray booth need?
Answer:garutech spraybooths use bright, shadow-free, color-corrected lighting — commonly LED fixtures rated around 5000K color temperature with a high CRI — positioned to eliminate shadows on the vehicle surface, since poor or degraded lighting is a common cause of color-matching complaints. Fixtures should sit behind approved sealed glass panels so they can be serviced from outside the booth without exposing electrical components to the hazardous spray area.



---25. What heating options are available for spray booths?
Answer: Most commercial booths use direct-fired diesel heaters or natural gas or electric eater but electric heater is not recommended in Nigeria because of power supply instability, integrated into the airflow system for fast, efficient bake-cycle heating; electric heating is available where gas service isn't practical. Look for a recirculation or "recycle-on-bake" mode, where a large share of the booth's air is reheated and reused during the bake cycle rather than pulling in and heating 100% fresh outside air — this can meaningfully cut fuel costs.
garutech standard model use diesel burner.

---26. What control panel features should I look for?
Answer: Modern booths increasingly offer manual , digital or touchscreen control panels that manage spray/bake mode switching, cure-cycle programming (often with many stored programs), temperature and pressure monitoring, filter-life or filter-change alerts, and sometimes remote diagnostics/monitoring from a phone or computer. Garutech spraybooth control panel comes with 1 year warranty .

27. What is "positive pressure" and why does it matter?
Answer: A pressurized (positive-pressure) booth is set up so slightly more air is pushed in than is exhausted out, which helps keep dust, dirt, and debris from being drawn in through door seals and gaps — improving finish quality and reducing contamination-related defects.

---28. Why is my paint booth losing pressure or airflow?
Answer: The most common causes are clogged or saturated filters, worn or damaged door seals, a failing fan belt or motor, or an imbalance between intake and exhaust air (often due to a missing or undersized make-up air unit). Regular filter changes and door-seal inspections resolve most airflow complaints; if pressure loss continues after that, it typically points to a mechanical fan/motor issue needing a service visit.
if you have any issue with garutech spraybooth that is related losing preseure kindly call our support line +2348023190606, +2348037153638

29. What causes color-matching problems under booth lighting?
Answer: This is usually traced to low-quality or degraded lighting fixtures, overspray build-up coating the light lenses, or a mismatch between the booth's light color-temperature and natural daylight. Routine cleaning of light diffusers/lenses and consistent, color-corrected LED fixtures largely prevent this.


30. Do larger spray booths need extra equipment like a make-up air unit?
Answer: Yes — larger booths move more exhaust air and generally require a dedicated make-up air unit (MAU) to replace that air and maintain correct pressure balance and temperature; an undersized or missing make-up air unit is a common cause of pressure and comfort complaints.


---31. What noise level should I expect from a spray booth's fans?
Answer: garutech Safety & Compliance Considerations (85 dBA): Under standard workplace safety guidelines, continuous exposure to noise at or above 85 dBA over an 8-hour shift requires hearing protection (earplugs or ear defenders).

Operator Comfort: Even if the booth runs under 80 dBA, wearing hearing protection while spraying is standard practice because the high-pressure pneumatic spray tool adds transient peak noise

32. What construction materials are spray booths built from, and does it matter?
Answer: Most commercial booths use dual-skin, insulated steel wall panels (often galvanized and powder-coated) that improve thermal performance, reduce noise, and resist corrosion better than lighter single-skin construction. Ask whether panels are insulated (dual-skin) or uninsulated (single-skin), since this affects both energy costs and long-term durability.

Garutech brand of automotive oven and spraybooth. we lead others follow. for more information
Lagos office:
20 Akinremi st. anifowose, Ikeja lagos.
08037153638
08023190606
www.garutech.ng

Spraybooth

--Wall panel: sandwich style, δ=50mm, polystyrene. rock wool is optional.

--Basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional.

--Door: 3 pcs of front door without aluminum side cover.

1pcs of emergency door with pressure lock.

--Ramp: 2 pcs of vein board.
-One 7.5kw intake fan

--4m straight exhaust ducts, one 90° bend, and one 60° bend.,4m straight chimney and 2 small bends.

--Spraying/baking transition damper, automatically air controlled.

--Heat exchanger: stainless steel. Riello G20 burner.

--Roof filter: 4 pcs of filter, mounted above support frame, which is made of steel and powder coated.

--2 pcs of floor filter and 1 pcs of outlet filter.--Upper light: 10 sets, 4*40w per set.

--Control box: High quality components, overload, overheat,

phase-lacking protection, straight driven motor.

--Automatically stop when preset time is up.--Constant temperature spraying.

Garutech spraybooth is a closed Automobile spray environment for vehicles painting and baking.
GTSB-300 series car spray booth is efficiency and enlarge the profits for our customers with lowest operation costs and little environment impact.

Standard size :

7 meters long , 5.35meters wide, 3.4 meter high : which is suitable for cars, suvs, light trucks
50mm thickness EPS. Heat Preserving Panels boards 0.376mm thickness.
Galvanized steel roof panel
The heat exchanger Made of stainless steel reaches 85%.
With Galvanized steel sheet and square steel pipe construction of 1.0mm to 1.4mm thickness for the basement, make them to last over 10 years
7.5kilowatt to 8kilowatt intake fan and 5.5-7.5kilowatt of 25,000.cubic meter per hour exhaust fan.
With an Italian Riello G20 diesel burner of 20,000. Kilocalories per hour. The heating time 4-7min
Efficient Fuel consumption, Lighting System , Air Purification.
Special voltage for Nigeria electricity from 415Volt , 50hz, 3phases
Spray booth comes with 1 years warrantee.

Our spraybooths are highly reliable and trusted
Garu technologies Nigeria limited.
20 Akinremi st. anifowose, Ikeja lagos.

Abuja office:
AJB mall, plot 1123, oladipo Diya Road, Gudu District, Abuja.

08023190606,

for more info :
GARU Technologies Nigeria Ltd .

For your garage equipment, automotive diagnostics tools, Spraybooth (Car Oven) car wash equipment and garage set up.

Lagos office:
20 Akinremi st. anifowose, Ikeja lagos.
08037153638
08023190606

Abuja office:
AJB mall, plot 1123, oladipo Diya Road, Gudu District, Abuja.
08070447698
08101033337

https://maps.app./uMZ5JzZy21Hdg8rY6

www.garutech.net

Garutech spraybooth is a closed Automobile spray environment for vehicles painting and baking in a body shop with pressure control.
GTSB models car spray booth aims to promote efficiency and enlarge the profits for our customer. For this purpose, it must achieve the fastest drying time, the lowest operation costs and as little environment impact as possible.

Our Standard size is
7 meters long ,
5.35meters wide,
3.4 meter high : which is suitable for cars , suvs , and light trucks
50mm thickness EPS . Heat Preserving Panels boards 0.376mm thickness.
Galvanized steel roof panel
The heat exchange rate, Made of stainless steel reaches 85%.
With Galvanized steel sheet and square steel pipe construction of 1.0mm to 1.4mm thickness for the basement which make them possible to last over 10 years
7.5kilowatt to 8kilowatt intake fan and 5.5kilowatt to 7.5kilowatt of 25,000.cubic meter per hour exhaust fan.
With an Italian Riello G20 diesel burner of 20,000. Kilocalories per hour. The heating time 4-7min
Efficient Fuel consumption
Enough Lighting System
Air Purification can reaches 98%.
Pollution Control System
Special voltage for Nigeria electricity from 415Volt , 50hz, 3phases
GArutech spray booth comes with 1 years free service warrantee.
High quality raw materials

Our spraybooths are highly reliable and trusted
Garu technologies Nigeria limited.
20 Akinremi st. anifowose, Ikeja lagos.

Abuja office:
AJB mall, plot 1123, oladipo Diya Road, Gudu District, Abuja.

08023190606,
08037153638
08101033337

www.garutech.net

Garutech : reliable and trusted

GARU TECHNOLOGIES NIG. LTD (GARUTECH) has created a sensational bench mark when it comes to modern and Computer age auto workshop and standard lube bay set up with high quality garage equipment. Our professionalism is proven all over Nigeria to other African countries and across the shores.

We deal on high quality automotive equipment's such as:

1) Automotive computer and CCD and 3D alignment machine
2) computer and Digital wheel balancer and automatic Tire changer
3)Spray booth and all vehicle body repair equipment
4) Garage equipment and tools.
5) Jacks, engine cranes, shop press , brake lathe, AC service station, power tool and more..
6) Computer diagnostic tools, vehicle scanners for both small cars,light trucks, heavy duty ,buses,construction equipment,generator and motor bikes.
7) Automotive Programming Device for ECU re-programming and keys
Set up of modern Auto workshop and Lube bay.
9) automotive equipment sales, installations , repairs and maintenance.
LAGOS ADDRESS: 20, AKINREMI STREET , ANIFOWOSE, IKEJA; ABUJA OFFICE: AJB MALL, 1123, OLADIPO DIYA RD. GUDU
+2348023190606. 08037153638, 08101033337
www.garutech.net.

Welcome to Garu Technologies Nig. Ltd

THE ONLY OFFICIAL RESELLER OF ALL ORIGINAL AUTOMOTIVE TOOLS.

20 Akinremi street , Anifowose , Ikeja . Lagos

Email: lukmangaru@yahoo.co.uk

Phone: +234-8023190606, 234-8037153638
Apo Mechanic village , Abuja. 08101033337

garutech
www.lukmangaru.com

Our Products range from Entry Level OBD-II Scanners to

Professional Diagnostic Analysis Systems.

We also stock the unique Masquest ™ Brand of Portable Car

Inverters, the award Winning Tramigo™ Car Trackers and many

more exciting products!

We are the only official reseller and distributor in Nigeria for more than 40 products..

Follow us on Twitter www.twitter.com/garutech

check our blog www.lukmangaru.com for fantastic info.

www.garutech.net

CRUDE FACTS!!!

1) One barrel of Crude oil = 42gallons or 159 litres.

2) Our Refineries (i.e 4) Installed (combined) capacity = 445,000 barrels per day.

3) Actual refineries capacity due to ageing equipment = 30% i.e. 133,500 barrels per day.

4) . . 133,500 barrels = 21.2 million litres.

5) Local required consumption (F.O.S) = 12millions litres

6) It means that even our MORIBOND refineries can actually meet our local consumption need of petroleum.

7) The cost structure of crude oil (i.e. Qua Iboe Crude Oil) production;
- Findings / development - $3.5
- Production cost - $1.5
- Refining Cost - $12.6
- Pipeline/transportation - $1.5
- Distr/bridging fund Margin -$15.69

True cost of one litre of petroleum anywhere in Nigeria;
- Total sum cost = $34.8
- 1ltr cost = $34.8/159 litres = $0.219
- Naira equiv.:$.219xN160= N35.02k
- Add Tax N5 + N35.02 = N40.02

9) Let FGN refute the above composition and if not, they should tell us how they came about N65/litre.

10) Locally refined products cannot be sold at International price.

11) We really do not need FGN SUBSIDY as there was NONE in the first place.

12) What is LACKING, is the WILL to enforce LAW ON CORRUPTION.

Please re-broadcast until it gets to the right quarters for their response

This product is 100% original with 1 year free update and warrantee.

You can resell this product and make up to 25% profit on one .

Contact us for more detail.

lukmangaru@yahoo.co.uk

check other products and services on our site.

www.garutech.net.

Overview

AUTOSNAP® GD860, new generation diagnostic tool, stands the latest and innovative technology with brand new technology platform. GD860 delivers more accurate, more comprehensive, more stable and faster diagnosis to help workshops and technicians repair vehicles.

https://www.auto-snap.com/upload/pic/20110723160959665.jpg

Features

Capable of nearly all European vehicle makes
Supports all OBDII protocols and all 9 test modes
Turn off engine, transmission, ABS, airbag warning lights
Complete function capability including Live Data, Adaptation, Actuation Test, ECU programming and others
Covers all electronic systems of vehicles: Engine, ABS, SRS, AT and others
Innovative dual-processor technology for quicker diagnostics
7 inch 800 x 480 pixel TFT color display with high luminance and high resolution provides excellent view of test results, wave, graphs, gauge and etc.
Extremely easy, convenient and flexible to use with touch screen operation
Windows CE operating system makes more stable performances, better compatibility and expandability
Extremely easy-to-use with touch-screen operation
Unique ergonomic design features strong housing and more convenient to hold
Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles
Capture, save and print screenshots for convenient troubleshooting
Display live data in text, graph and analog for easy data review and analysis
Record and playback live data
Universal 16 PIN connector for all 16 PIN socket
Print out data with optional mini-printer


Vehicles Coverage:

OBDII/EOBDII, Audi/VW, Seat, Škoda, BENZ, BMW, Volvo, Opel, Citroen, Peugeot, Renault, TOYOTA, HONDA,  DAIHATSU, MITSUBISHI,  MAZDA,  NISSAN,  SUZUKI,  SUBARU and more,

https://www.auto-snap.co.uk/fotky5231/fotos/_vyrp12_91.jpg
https://www.auto-snap.co.uk/fotky5231/fotos/_vyrp13_92.jpg
https://www.auto-snap.co.uk/fotky5231/fotos/_vyrp14_93.jpg
https://www.auto-snap.co.uk/fotky5231/fotos/_vyrp15_94.jpg

DISTRIBUTOR:
Nigeria/Ghana/ West Africa
Garu Technologies Ltd
Address: 20, Akinremi street. Anifowose, Ikeja
city : lagos. Nigeria
web : ::Garu Technologies:: http://www.garutech.net
blog: Nigeria Trusted Automobile and GSM Solution Consultant http://www.lukmangaru.com
phone: +2348023190606, 018513499, 018953727, 08037153638
msn: garutech@hotmail.com
icq: 331646561
sonork: 100.65030
yahoo: lukmangaru@yahoo.co.uk

Reseller welcome allover Nigeria and west african . pls mail me for more info lukmangaru@yahoo.co.uk