₦airaland Forum

Learn basic techniques in Instrumentation and Calibration. Email-philip.ikem@giltraining.com

Enhance your skill in Instrumentation and Calibration

Please contact philip.ikem@giltraining.com for training fees and registration.

Dear Sir/Madam


INSTRUMENTATION,MAINTENANCE & CALIBRATION TECHNIQUES

JUNE 20-24,2016.(PORT HARCOURT,RIVERS STATE)







COURSE TITLE: INSTRUMENTATION,MAINTENANCE & CALIBRATION TECHNIQUES

COURSE OVERVIEW:

A Process can be described as a sequence of changes in a substance and instrumentation systems are a group of instruments or their application for the purpose of observation, monitoring or control. The training program focuses on the concepts and characteristics associated with industrial processes, process variables and Basic process control. Participant will have hands-on experience with a simple control system as well as process and controller simulators.

OBJECTIVES:

1. Understand calibration principles.
2.Carry out repairs and calibration properly.
3.Observe safe practices when carrying out repairs and calibration activities.

TARGET GROUPS:Personnel involved in design, installation, operation and maintenance of industrial instruments.

PREREQUISITES:Basic knowledge in science and industrial systems.

DURATION:Five(5) Days

TRAINING DATE:JUNE 20-24,2016.

METHODOLOGY: The training will be complemented by class workshops, discussion on industry best practices and ISA videos on Instrumentation, Process and Control.Certificate will be issued at the end of the training.

COURSE CONTENTS:

Introduction to calibration principle
 Pressure, temperature, level & flow instrument/gauges calibration
 Pneumatic and current conversion system
 Calibration documentation & abbreviations definitions (MPA, KPA, PSI, BAR, KGF/CM)
Current loop characteristics
 Pre-check: Checking for open circuit & Checking for short circuit
 Loop check
Familiarization with measuring instruments
Selection of Measurement and Control Devices
Repair modes and records; Failure mode analysis;
Maintenance, calibration modes, and records; Calibration seals; Tools and equipment
Handling equipment; Cleaning and decontamination; Testing and evaluation; Disassembling and
reassembling; Calibration; Test stands
Troubleshooting instrument error
Safety while working with instruments
Hands-on practical exercises & simulations

VENUE: GIL AUTOMATION; 2,Okoru-Ama Street,off Odii Road,Trans Amadi,P/H,Rivers State.

FOR ENQUIRIES: PLEASE CONTACT;

Mobile:09085020623
Email:philip.ikem@giltraining.com
Website:www.giltraining.com
GIL Automation..systems that work

Acquire relevant skills

Registration still on.

At GIL we don't just train,we do AUTOMATION.

Dear Sir/Madam,

A unique opportunity to be the most sought after Automation and Instrumentation Engineer.




CERTIFICATE IN AUTOMATION ENGINEERING(CAE)

WEEKEND SESSION(JUNE 18-SEPT 3,2016)





Inline image 1Inline image 2








COURSE TITLE: CERTIFICATE IN AUTOMATION ENGINEERING(CAE)


COURSE OVERVIEW



This is aimed at bridging the gap between professionals and young engineers/graduates. Local man power development has been a major challenge in Nigeria as well as graduates/young engineers being unemployable. This CAE training aims at reducing these challenges by empowering our engineers, improving their competency, making our graduates employable and enhancing their working culture to current world standard. All GIL instructors are certified.

WE DON’T JUST TRAIN, WE DO AUTOMATION.


OBJECTIVES



After the training, Trainees shall be able to work on typical control systems projects including:



PLC, HMI/SCADA System Design, installation, configuration,

programming (sequential, subroutines and interrupts), downloading & uploading

System Integration: interface of main control system to external systems e.g.

Fire & Gas System, Public address system (PA/PG), generators, MCC, etc to the operator HMI

Safety Instrumented System projects on instrument control loops design and implementation

Demonstrate good automation project management and commissioning skills

Free ISA (International Society of Automation) Membership registration.



TARGET GROUP: For those who have basic knowledge in Science and Engineering, New recruit Engineers, Technicians, Supervisors, Managers and subject matter professionals.



Prerequisites: Minimum Requirement for CAE – Basic knowledge in science, electrical and computer systems.



METHODOLOGY: Lectures complemented by hands-on exercises using Allen Bradley PLC, RSLogix500 and RSEmulator500,Simatic Step 7, SmartPlant Instrumention(SPI), Wonderware InTouch etc. Certificate will be issued at the end of the training.






COURSE CONTENT:

Automation Project Management

Working with Industrial Standards

Programmable Logic Controller (Allen Bradley and Siemens)

Programming & Operation (Using RsLogix-500 and Simatic step 7)

Working with Programming Languages & Instructions

Timers, Counters & Comparison / Mathematical Instructions

Analog Signal Processing (ASP)

Subroutines

Program Debugging & downloading/uploading

PLC Status Troubleshooting

Human Machine Interface System (Using Wonderware InTouch)

HMI Fundamentals

Communication Protocols, Database & DDE Connection (Server, I/O Drivers)

Interfacing with PLC and field devices & Data acquisition from field devices

Process Screen Development

Operator Screen Interface Design (Statics)

Tagging, Addressing & Configuration

Principle of Operation Architecture of Distributed Control Systems (DCS)

Instrumentation design with INTOOLS (Intergraph SmartPlant

Instrumentation)

Instrumentation, Maintenance & Calibration (This will be in our Port

Harcourt office)

Basics of Variable Speed Drives (VSDs)

Basic Panel wiring design

Introduction To Industrial Communications

Free ISA Membership Registration (To be paid for by GIL Automations)





TRAINING DATE: JUNE 18-SEPTEMBER 3, 2016



VENUE: GIL TRAINING: Daily Times Complex, Lateef Jakande Road, Beside Cadbury, Agidingbi Ikeja, Lagos.


FOR ENQUIRIES: PLEASE CONTACT
GIL AUTOMATION LTD
MOBILE:09085020623
Email:philip.ikem@giltraining.com

Dear Sir/Madam,

A unique opportunity to be the most sought after Automation and Instrumentation Engineer.




CERTIFICATE IN AUTOMATION ENGINEERING(CAE)

WEEKEND SESSION(JUNE 18-SEPT 3,2016)





Inline image 1Inline image 2








COURSE TITLE: CERTIFICATE IN AUTOMATION ENGINEERING(CAE)


COURSE OVERVIEW



This is aimed at bridging the gap between professionals and young engineers/graduates. Local man power development has been a major challenge in Nigeria as well as graduates/young engineers being unemployable. This CAE training aims at reducing these challenges by empowering our engineers, improving their competency, making our graduates employable and enhancing their working culture to current world standard. All GIL instructors are certified.

WE DON’T JUST TRAIN, WE DO AUTOMATION.


OBJECTIVES



After the training, Trainees shall be able to work on typical control systems projects including:



PLC, HMI/SCADA System Design, installation, configuration,

programming (sequential, subroutines and interrupts), downloading & uploading

System Integration: interface of main control system to external systems e.g.

Fire & Gas System, Public address system (PA/PG), generators, MCC, etc to the operator HMI

Safety Instrumented System projects on instrument control loops design and implementation

Demonstrate good automation project management and commissioning skills

Free ISA (International Society of Automation) Membership registration.



TARGET GROUP: For those who have basic knowledge in Science and Engineering, New recruit Engineers, Technicians, Supervisors, Managers and subject matter professionals.



Prerequisites: Minimum Requirement for CAE – Basic knowledge in science, electrical and computer systems.



METHODOLOGY: Lectures complemented by hands-on exercises using Allen Bradley PLC, RSLogix500 and RSEmulator500,Simatic Step 7, SmartPlant Instrumention(SPI), Wonderware InTouch etc. Certificate will be issued at the end of the training.






COURSE CONTENT:

Automation Project Management

Working with Industrial Standards

Programmable Logic Controller (Allen Bradley and Siemens)

Programming & Operation (Using RsLogix-500 and Simatic step 7)

Working with Programming Languages & Instructions

Timers, Counters & Comparison / Mathematical Instructions

Analog Signal Processing (ASP)

Subroutines

Program Debugging & downloading/uploading

PLC Status Troubleshooting

Human Machine Interface System (Using Wonderware InTouch)

HMI Fundamentals

Communication Protocols, Database & DDE Connection (Server, I/O Drivers)

Interfacing with PLC and field devices & Data acquisition from field devices

Process Screen Development

Operator Screen Interface Design (Statics)

Tagging, Addressing & Configuration

Principle of Operation Architecture of Distributed Control Systems (DCS)

Instrumentation design with INTOOLS (Intergraph SmartPlant

Instrumentation)

Instrumentation, Maintenance & Calibration (This will be in our Port

Harcourt office)

Basics of Variable Speed Drives (VSDs)

Basic Panel wiring design

Introduction To Industrial Communications

Free ISA Membership Registration (To be paid for by GIL Automations)





TRAINING DATE: JUNE 18-SEPTEMBER 3, 2016



VENUE: GIL TRAINING: Daily Times Complex, Lateef Jakande Road, Beside Cadbury, Agidingbi Ikeja, Lagos.


FOR ENQUIRIES: PLEASE CONTACT,

GIL AUTOMATION LTD
MOBILE:09085020623
Email:philip.ikem@giltraining.com