₦airaland Forum

Hello, greetings house. I have a vehicle in good shape and all that is to be shipped via grimaldi. I was tracking it before and everything was all good. It showed “On load order” and expected sailing date and arrival kept shifting. Last I checked it was 28th of September to arrive.. 13th of October thereabout. All of a sudden, “on load order” doesn’t show any more and the time of sailing and arrival has changed to 31st December. What could be the issue?

Update: Thanks for your response @Louiscars . I think they did all this today. They tested with a different abs by removing the connector from mine and reconnecting to the other. The ABS light disappeared but the BRAKE light remained. I think that might be as a result of the other connections (the black tiny tubes) not made as it was just a test. Now I don’t want to believe the ABS of my new car has gone bad. Any remedy to this? Is it possible it gets fixed on its own with time? Maybe the water that entered the ABS dries up with time? Any help is appreciated..

Louiscars:
Hello sir, have you tried checking if the brake light works at the tail light.
• secondly did the mechanics check the vehicle’s fuses ( most especially the stop switch fuse) and it’s relay.
• checking circuitry connections from the stop switch to the abs control module for continuity.
• also since the vehicle was pressure washed the abs connector should be examined in case of water ingress that could cause corrosion of its pins)
This are basics steps to be checked first

Hello bosses, greet you all. This is kinda lengthy but I need all the help I can get.

I just got a Toyota HL 2015 ltd plat edition. I got it directly from the US… shipped to lagos. I drove the car for about three days and all was good, no error codes on dasboard/cluster. Now I took the car to a car wash guy that supposedly washes car for car dealers. He was to do a thorough washing of the car. He removed all the chairs etc and washed the engine side too. Now this is where the problem began. When I came to pick up the car, I noticed the BRAKE and ABS error code appeared and a notification saying “Check PCS System”. I removed the battery and it disappeared. On getting home, the error code reappeared. I decided I’d get it checked today. I took it in for scanning today and got this code “C1425: Open In stop switch circuit”. The mechanic guys tried all they could but the error code kept coming back. I know this has to do with the car wash I took the car to, maybe water got in to the wrong place, not sure. Please I’d appreciate any help to get this code off my dashboard. We tried changing Brake switch but it still persists. Attached pictures of the error code too.