₦airaland Forum

What is dead may never die again...#seun

Be part of our winning team... Register now !

Can you make it to Port Harcourt that's where our office is?

danfash09: Am interested please i reside in ibadan

Register Before 31st Jan 2014 and enjoy 50% DISCOUNT !!!

Register Before 31st Jan 2014 and enjoy 50% DISCOUNT !!!!

This course covers the full CISCO curriculum for the Cisco Certified Network Associate (CCNA). At the end of this course the candidate should master the principles of routing and switching and configuration of Cisco routers and switches, the design, development and maintenance of Local Area Network (LAN) and its security.
This course consists of several practical sessions and students will be practicing with live Cisco routers and switches.

Course content:
Internetworking
Introduction to TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Duration
Corporate training 5 Days
Individual training 4 Weeks (weekdays)
Individual training 8 Weeks (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of Network planning and Engineering gives you an edge in the labor market. Writing the CCNA professional exam after this course is a plus as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact info@hightechng.com or call +234 (0) 7035816455

@Op... Have you been called by ITL, I saw your email on their success mailing list.
Cheers

Register today to enjoy 50% discount....

50% discount for all our courses... Book a class now !

Purely Hands On

Place a call now and book your class.

JUST N80,000

ADVANCED INDUSTRIAL AUTOMATION (with Allen Bradley Compact and Control Logix)
BENEFIT OF TRAINING WITH US:
(1) The training is purely hands on skill as outlined in the course content
(2) Our certificate is internationally recognized and carries a security feature which cannot be duplicated.
(3) We partner with some of the industrial major player like Schneider Electric etc
(4) Free job consultancy and placement

LIVE PRACTICE WITH ALLEN BRADLEY COMPACT GUARD LOGIX 1769 + RSLOGIX 5000

Course Outline
Module 1
This module takes an approach to a ControlLogix system. It begins with an overview of the architecture and migrates into an introduction of RSLogix 5000, the programming environment. Students will learn how to setup communications to the PLC using RSLinx, download and upload projects, as well as determine the modes of the CPU.

Lessons
System Overview
RSLogix Studio 5000 Overview
RSLinx
Configuring Ethernet Modules
CPU Modes
Downloading / Uploading

Module 2
This module presents the key of memory management with a discussion of the tag database. The module continues with instruction on configuring the digital and analog I/O modules. Non Volatile Memory is discussed and then the student will learn the rudiments of ladder logic. The relay type instructions will be covered and how to enter and edit the in the ladder editor. A lesson on documentation concludes the module.

Lessons
Tag Database
Configuring Discrete I/O
Configuring Analog I/O
Non Volatile Memory
Ladder Logic Basics
Relay Type Instructions
Editing Ladder
Documentation

Module 3
This module starts by looking at timers and counters. The tag database is revisited by looking at the more advanced features of arrays and user defined data types. The module continues with compare, math and mask instructions.

Lessons
Timers
Counters
Arrays
User Defined Type
Compare Operations
Math Operations
Mask Instructions

Module 4
The beginning of this module covers the different ways to scan through routines with tasks, programs and routines and the program control instructions. There is instruction on some helpful troubleshooting tools and principles, which include searching, forcing, trending and the project compare tool.

Lessons
Tasks, Programs and Routines
Program Control
Searching and Cross Reference
Forcing
Trending
Project Compare Tool
Troubleshooting

COST: 80,000

TEL: 234(0) 7035816455
EMAIL: info@hightechng.com
www.hightechng.com
PORT HARCOURT OFFICE
14 Woji Road, Off Old Aba Road, Rumuogba,
Port Harcourt, Rivers State

50% discount for all our courses... Book a class now !

50% discount for all our courses... Book a class now !

End of year discount for all courses register now !

Enjoy 25% discount as you register.

End of year discount applies...

Register today and get 25% discount.

New class resumes monday... Be part of it.

Registration in progress....

New class starts monday.... Be part of it !!!

Call now to book a class...Cheers

This course covers the full CISCO curriculum for the Cisco Certified Network Associate (CCNA). At the end of this course the candidate should master the principles of routing and switching and configuration of Cisco routers and switches, the design, development and maintenance of Local Area Network (LAN) and its security.
This course consists of several practical sessions and students will be practicing with live Cisco routers and switches.

Course content:
Internetworking
Introduction to TCP/IP
Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Managing a Cisco Internetwork
IP Routing (RIP &RIPv2)
Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Layer 2 Switching and Spanning Tree Protocol (STP)
Virtual LANs (VLANs)
Security
Network Address Translation (NAT)
Cisco’s Wireless Technologies
Internet Protocol Version 6 (IPv6)
Wide Area Networks (WAN)

Duration
Corporate training 5 Days
Individual training 4 Weeks (weekdays)
Individual training 8 Weeks (Weekends)
Learning Process Flexible

Who should attend?
Engineering and Science professionals in Oil and Gas, Telecommunication or ICT sector.
Unemployed Engineering and Science graduates seeking for high paying jobs in Oil & Gas, Telecommunication or ICT companies.
Serving (NYSC) Engineering and Science graduates seeking for good paying jobs in oil & gas, telecoms and ICT companies.
Self employed entrepreneur seeking for career advancement.
Engineering and Science Students.
Anyone with passion for knowledge who seek employment or career advancement in Oil & Gas, Telecommunication and ICT.

Benefits
Mastering the principle of Network planning and Engineering gives you an edge in the labor market. Writing the CCNA professional exam after this course is a plus as it stands you out as a professional with exceptional skills and can also pay your bills as an entrepreneur
This is a highly sought after professional skill in the labor market with high pay package and benefits. For more information contact info@hightechng.com or call +234 (0) 7035816455, +234 (0) 8180178962, +234 (0) 8154940467.

Take the bold step now and book a class. Cheers

justchill: Is this training available in kaduna?

No only in PHC...

New class starts Monday make your booking now!

Register this week and get 30% discount. Cheers

Call now to book a class...cheers

zaimeg: Okay, I'm serious about the fiber optic stuff. Do you have the equipment?

Yes we have the splicing machine your training will be on the field training.