₦airaland Forum

i need article writers for my website, i will be paying =N=200 per article, i need about 100 articles every month,
each articles should not be less than 1000 words and should be an original writing not a copy and paste content, the authenticity of the articles would be scrutinized and verified sternly so if you plan on doing copy and paste, this is not for you, each articles will be written in a Nigerian perspective. serious writers should send me private message here on nairaland.

folamingo:
ok, I have a 2.5kva prag inverter with 4 200A batteries. I recently heard about an LG 1HP AC that can work at 0.9kva using a generator mode feature on it. In order words reducing the start up power consumption that normal traditional AC exhibit.

My question is does the generator of 2.5kva and the inverter of 2.5kva operate in the same manner, and would it be safe to connect the LG 1HP AC that has the feature of Generator mode to the inverter?

Thanks

hello...have you tried the setup u wrote above, because that is what am planning to do....how long does the inverter last with the gen cool ac on......and how long does it take the inverter to charge the batteries back

seems most people here do intraday trading, does anybody know uj weekly forecast for this week

O

L

O

olaoluwa

lari03: its also a state of mind, I have been there in the past.

i hope this phase pass soon, cos have been single for about a year because of this insecurity, i know there are a lot of ladies out dere who dont give a damn about my present financial status so far i have prospects,i know the problem is me..... i never had this issue when i was an undergraduate

my financial status, Not as if i plan on spending money on ladies or dating a materialistic lady, but i just dont have that confidence to ask a woman out when i know i have just enough to feed myself,

lippyrat: it is becoming clear to me that there won't be transparency in this recruitment process.

The slogan if it is for it is for you highlights that fact.

1. gate crashers got success mail.

2. 1 set of success mail was sent in june and another in october

3. i now suspect that everyone has an insider doing everything around the clock to squizzle thru.

your point number 3 is baseless because i dont have an insider and i still got the success mail,

your point number 1 is not much of a point because the only thing that differentiates us and the gate crashers is that you applied before the test date, we probably are not smarter than them, we were just lucky to have gotten the information to apply on time

your point number 2 still doenst signify any non transparency, they may have their reasons for calling by batches, probably the pple that did well were called first

Summary: am not in any way argueing or saying this recruitment step is gonna be transparent, all am saying is that you dont have facts to back that conclusion,
i wish all of us the best in getting this job cos i really need it

if the guy no come meet you...you self go meet am nah......u dey fear rejection abi.... well you ladies reject us everyday and we get over it, so just go try ure luck

my own be say make una tell us when the rigs go arrive.....all this call me and i no go call issue no concern me, na like 5 times a day i dey always check dis thread to see any new development
by the way, can somebody recommend topics for me to read up concerning the job so that i no go disgrace myself for the interview cos i dont know much about rigs(my first degree is civil engr)

okyodic: I believe the rig will arrive dis October and dat was the reason transocean asked ivara to send out mails... maybe transocean may have another one coming in January

how sure are you and where did you get your information please

i beg una with God.....make una send to me ooooo.....i get the test on saturday,,,bikoooo.....leotechmedia@yahoo.com

deepwater: Hehehe don't dream about me o!

no vex my broda, the tin just be say i need dat job desperately and if i have to dream of every nigerian to get the job then no wahala....Let the dreams begin in Fast forward mode sha

@op............ na all the skills i get..... employers dont know what they are missing..... and no money to start bizness.....times are hard.....even a whole federal government self dey owe

Guys, do you know when they are expecting the rigs, i cant wait to start this job ooooo.... since day b4 yesterday i no fit sleep again....if i just do mistake doze small, na so i go dey dream of ocean and deepwaters

Me again

just me

Greatken007: My secondary sch mate did same bt he said his was 300k,nw i wil assume you ar my brother or close pal,there is this welding training organize by FG(for 1 yr and u wil be under monthly pay and easy to get) u can patiently wait for that or put ur eyes on ground 2 look for other cheaper ones(if 1 yr training is too far),My close pal is doing an hot cake prog wit API(American Petroleum Institute) and it goes 4 400k,oil companies wil drag 4 u if u can obtain this(u wil b given materials +CD to study for 2months b4 u nw meet them in PH for practical),go and do some investigation about them b4 u drop any amount(300-400k no b small money ooo),try also to be involve wit HSE course wit Nigerian instistute of safety professionals,less than 60k you wil get d required knowledge such as General HSE and Level 3 for supervisory level.i am nt asking u 4 any penny,just do ur home work well

Tanks for your advice, please you didn't mention the name of the course your friend is doing with API, so that I can properly research on it,thankyou once a more

gbagelat: You can do the tranning

this is doesn't look like advice to me, anyways tanks....
More advice and opinion needed please

Good evening
Please am about to enroll for a two months training course on pipeline welding in benek engineering school of welding port harcourt, the program is going to cost me about 350k(which took me almost a year to save), my question is that, will this course and training increase my chances of getting a job,I don't mind working as a contract staff and work my way up,I graduated from the university with 2.2 in civil engineering,I have been on job search since I graduated bt have nt been lucky yet,pls advice me, is this pipeline welding training worth my 350k?, if yes is benek engineering the best place to do it,this money is a big money to me ooooo, I can't afford to waste it....tanks 4 anticipated response (pls ignore the typos....am typing from a phone)

kokosheen: That you graduated with a B.Tech doesn't mean you're a technician. The course you're going for would prepare you for a job done by artisans and contractors/contract workers, and won't be a leverage for a direct staff position for engineers/technicians (that's if you don't mind) in a major Oil & Gas coy.

I would advise you to look for training institutes that deliver specialized training with regards to construction & construction mgt., environmental sciences (soil studies etc) and pipeline construction/maintenance (Cathodic protection/pigging)/materials (HDPE/GRE/GRVE/SS/CS).. These courses would serve you better instead in your search.

Also, Oil&Gas safety courses (any engrg/science discipline can perform as a safety officer).

Good luck

Tanks for the prompt reply, please can you enlighten me more on the pipeline construction/maintenance courses and which reputable institution can I do it in phc.....tanks

Hello friends
I don't mind your view on my situation, I have a b.Tech in civil engr with a 2.2 class division, I was adviced that to be able to enter the oil nd gas industry I should do some courses relating to the industry,am on the verge of paying 350k for a two months training in pipeline welding (argon welding or T-fillet welding)in benek school of engineering phc.I want to know if doing this course will increase my chances of getting a job, if it won't please which profesional course do you think will help me so I won't waste the money cause it took me close to a year to save it...tanks 4 ur anticipated replies.....(Pls ignore d typos...tying frm a fone)

How much is ur 52 inches LED 3D tv with the googles .... Nt more than 150 watt on power cos I will be using it with inverter.....leotechmedia@yahoo.com

hello guys, please am really hoping to find information about 3d animations and where to learn it in portharcourt, i dont mind other information related to it.

Omo...na true ooo...I stay at railway area in woji,d incident happened at ulom junction along woji rd....was on ma bed ds morning arround after six...I still dey snore... Na so my my bed,room,house vibrate with a loud gbammmmmmm....fear catch me...I first tink say na our gas cylinder explode... When we reach d place...kon see as mopol nd sojo plenty 4 dere...dem don trace d bomb...the anti bomb squard wey dey dere reach 4..... Na God save us oooooo..... Nd na lie dem dey lie... D missile was launched from bori camp nt d airport... Nd d building is nt uncompleted building....there is mechanic workshop nd a lot of oda workshops dere.... They just haven't resumed 4 d day