Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
yommysure: Please help, my 1kva afripower inverter is showing (short circuit pls check wiring ) when I switched it on. It was just making sound and doesn’t supply power .. please help me.
check your wiring,likely two wires has stick together.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
oluchibabe: Good afternoon good people. Thnak you for all the help you provide. I need help over this issue l am experiencing. My setup us 5KVA Inverter, 5500W (10UNIT) OF PV and DIY assembled LiPo4 26KW battery. Initially, everything was fine but after about a few months, if l switch on 1,5hp Pump, it will shut down, if l switch on Electric Hot Plate (3000W), it will shut down, despite the Inverter indicating battery was full.
I decided to add more Panels (team Big panel member), so l added 5units of 650 Panels. Still, the problem persist, it will shut down under the slightest load over 1KW.
I am at a point where l need to get things right and l am wondering over a few options. 1) Is my problem that of inadequate Power from Inverter (appliances demanding more than its max power output) or is it bad configuration? 2) Can /Should l buy another 5KVA Hybrid Inverter and put the later acquired 650W Panels on it separately and use it to charge my battery, would it provide additional power and prevent these shutdowns? 3) Should l buy an external CC and connect to the 650W x 5units of Panels, to charge the battery.
Thank you
I had similar experience at a time, if heavy load is powered power goes off. Was told to open my battery and check each of the cell if the nuts are tight, behold one of them was loosed. Since your ba3 us a DIY you can check if any of the screws are loosed