Have always had an issue of short circuit with my input and of recent my output. Currently use a 2.5mm wire and sometimes I draw up to 85amp. My question is what's my ideal wire size for that ampage or my 2.5mm might not be original?
dollarnaira: Battery temp during temp during charging can go up to 55°.
To survive this type of big capacity, charge your battery full first while you manage your load. After this stage, you won't need large amp to charge before it get full. Will it be safe if I go higher.
Avoid wasting energy and don't discharge too low.
what gave rise to this question was yesterday my ba3 was low and the sun was brief, but at that brief period it was charging at 2.4kw which is at 62a and cldn't get the ba3 above 70%. When hotplate was connected noticed the panel was delivery above 3kw which cld have gotten the ba3 full
bassdow: should be about 7amps though I personally don't have Lithium.
currently charging at 60a, but it's limiting my panel yield to 2.4kw, while my total panel is 3.6kw. Is it safe to increase the charge current since my inverter has a 100a charge current?. At 62a charge current my ba3 temp increases to 45°.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.
Machiny: We have chicken head for dogs here in port harcourt. It's a low cost of protein to compliment noodles and rice. Gotten from home grown chickens.