Mosab3000:
could you plz advice on GSKY V7 HD Hellobox
is it good? dose it support Auto roll in Africa? i read that its work as auto for America area satellite

any info?

could you plz advice on GSKY V7 HD Hellobox
is it good? dose it support Auto roll in Africa? i read that its work as auto for America area satellite

Abumilla:

pls. does the position of the yellow colour indicate H while the position of the red colour indicate V.

yes according to my LNB. If your previous setup indicate that your polarization is V while in the yellow color position then change to red position and go to H and vice versa.

Nss12@57e is using circular polarization R / L so you can not judge on H&V

moses4all:
24e is back but tend to freeze,work still on.Am down malawi.

make sure you use the new frequency and symbol rate
4136/13000/auto
then do the following

Change the dielectric plate position and change the polarity and adjust the LNB to best position everything will be fine

the Plate normal potion as per yellow color in the photo you should adjust to the red position and to change the polarity you have(normally from H to V)

DoctorHindus:
the signal of my sp24 @57e has dropped from 67% - 59% n is not very stable since they changed their frequency yesterday. pls has anybody else experienced d same?

make sure you use the new frequency and symbol rate
4136/13000/auto
then do the following

Change the dielectric plate position and change the polarity and adjust the LNB to best position everything will be fine

the Plate normal potion as per yellow color in the photo you should adjust to the red position and to change the polarity you have(normally from H to V)

mustaphataofeek:
24 w is not working

make sure you use the new frequency and symbol rate
4136/13000/auto
then do the following

Change the dielectric plate position and change the polarity and adjust the LNB to best position everything will be fine

the Plate normal potion as per yellow color in the photo you should adjust to the red position and to change the polarity you have(normally from H to V)

kd10:
Thanks so much for this information because Sat has given me all sort of stress to the extent that I plan to change my lnbf
Can you imaging signal stand at 82% still Sp24 will only flash green at interval 47% & disappear, I have screw the lnbf in different position still no way, what are my doing wrong? I inserted glass in the throat of my Supermax lnbf ring neck...pls any other clue I will appreciate it.Thanka

Change the dielectric plate position and change the polarity and adjust the LNB to best position everything will be fine [color=#990000][/color]

the Plate normal potion as per yellow color in the photo you should adjust to the red postion and to change the polarity you have(normally from H to V)

oyestoy:
it does not support it

thanks bro
which one? powervu it self or auto roll

Pls dose starsat 8989HD support Powervu autoroll ? Some one help

I'm asking about Starsat 8989 is it support powervu!? If yes is it support autoroll?
Please help

Dlee1:
Thanks to Sameer009 for releasing an auto roll firmware for SRT4950H (v3.58p). 24 blazing hot on SRT4950H. For those of you using this receiver should update theirs.

Is it expected to get new frameware for SRT 4950M
Any one who has contact with sameer or wizkid can give us reply

Please add my number to the free to air whatsapp Group
My no is +249123551116

Any one with happy news on sp24iiiiiiiiii?

arbourboateng:
can you snap a picture for us because the key provided by najmsat is what you provide but the key is not working on either 4922 series or qsat as well.

Keys not working

ben1daEbiri:
I don't believe that,the ones they give us come from there,and I taken keys from alphabox and it did on 4922!

Plz some one who get the keys for sp24 share it with us