₦airaland Forum

Also thank you for sending the picture of the TOYOTA WS AT

Thank you so much everyone , my auto mech just called telling me the gear is working fine now ,so am praying it wont get back to the previous state , on my way to get the car ' I still want to change the oil to Toyota WS but am wondering if I can get it in ABUJA

Okay please share gazzus number sir thanks

Please how much can I get the toyota WS ATF and where to buy it ? Is it common everywhere ?

Wow , I feel terrible right now 'most of these mechanics can frustrate someone , gearbox dealers are not to.be trusted I heard they work on scraps and resell

@Nuray thank you for your contribution the gear oil was drained replaced with 8ltrs of lubcon atf initially not topped sorry, Today my gear specialist ended up loosing the gear box and found out the clutch fibre is burnt , so he replaced it with another and also changed the valve body , theres a lot difference from the previous selection , this time he used forte oil in place of the ATF saying the oil is thicker , I hope by the time he finish testing the car the gear would be better of, 2007 camry is really sensitive

I used 8pcs of LUBCON ATF

Good evening everyone , Please is there anyone that can help me with a solution to my Toyota Camry 2007 13pin gear box problem , I recently bought the car from a car dealer and started driving it for some months and the gear was selecting fine until 3days ago , I noticed the gear 4 hits so I quickly rushed to the mechanic to scan the car to check what was wrong so the scanner detected a PRESSURE CONTROL SOLENOID D ELECTRICAL , so the mechanic removed the VALVE BODY from the gearbox and serviced it he also found out that the solenoids switch pin was broken so he changed it so after coupling it the gear oil was topped and we went for a test drive and the gear selection was perfect but after 40mins the gear malfunctioned again , the reverse is working but the drive fails sometimes when it gets hot after sometime when the engine is cool the gear works well and start malfunctioning, please what do you think can be done to fix this problem , the amount for a Belgium gearbox is above my budget for now , please someone should help with a good positive solution , will the gear work if i replace the valve body ? Or is the Fibre in the gear faulty ? Can it be replaced ?