₦airaland Forum

MANY THANKS TO YOU "ANN JENNY" FOR THE IMEI NOS. REALLY APPRECIATE

Can any kind-hearted nairalander help me to
generate 2 bb imei nos
Email : iwenkewa@gmail.com
Tanx in advance

Collinz2:
if u see full specs u go read am, no b only screen size, ram and rom size, camera, chipset, os version and battery specs u go read.

Can any kind-hearted nairalander help me to generate 2 bb imei nos
Email : iwenkewa@gmail.com
Tanx in advance

post=24328799:
I have successfully bricked 2 of my devices before which I later sold cheap to my friend.. of course that was when I was still new in the android world. ..com/2014/06/how-to-recover-any-bricked-or-hanging.html?m=o
B



Due to the rate at which people brick their device nowadays I will quickly show u guys how to un-brick a bricked device in case u don't know the meaning of brick... A brick device is a device which has become non functional or obsolete.
I will show u guys three ways to recover any bricked phone

1. This is the basic method. It was provided by the phone producers.
Its easy and simple. Just boot the
android into recovery mode, wipe/clean the
cache and factory reset. If this method didn't work. Follow the next method below.

2. Method 2

>>Just look for the same device as the one that was bricked
>>Switch off the phone. Hold the power key+volume up key to boot into recovery mood.
>> Navigate to Backup and restore with the down volume key.
>>Select Backup.
>> After successfully backing up the good device , remove the SD card, put it in your damaged phone search for the back up path/folder
>>Boot the bricked device into recovery mode
>>Go to backup/restore select restore
>> Navigate to the backup folder click and confirm
>> Your device phone should now boot normally as purchased.

Some device are so stubborn such that method 1&2 wunt work

3. Method 3
Your device should be well rooted and your USB debugging should be on(did your on your USB debugging before bricking your device) if u didn't root your phone just save yourself the stress of reading further.
>>search(Google) and Download PdaNet
>>search and Download MTK Droid tools
>>Search for the the boot.img of your device look for the same phone model and collect the boot image via MTK tools backup or download boot.img
file for your device.
>> Put on your lifeless device and plug it to your pc..
>>install PdaNet to
your PC
>>launch and install MTK droid tools.. Extract the files, make sure u know the path u extracted the files to!
>>open the MTK android tools path/ and launch the green logo
>>You will see should your device's
tails and the box bottom should be yellow
>>Press root at the bottom, and click OK till u stop seeing OK
>>If the box becomes green, just click on the root,
backup,recovery button
>> press to choose boot.img file
>>Click Recovery and Boot then scroll to the
boot.img and select
>> click yes continuously for every prompt
>> click to boot into run recovery after u see the recovery prompt
>> You can now wipe your cache partition, factory settings and DAV link.

You can also use this method to flash in a new custom ROM.

I believe your problem should be solved now. But if the problem persist or ur stuck in any step... Just comment with your question.

™

Do you want latest FBT, Bis update and mobile tips sent directly to your Email? visit www...com

when I run mtk droid tools it prompt something that ends with adb when click OK the application closes...help

Codedboy95:
there is nothing wrong with the preloader.bin i uploaded.. and you should only do what you are sure of, i don't know why you had to "format from sptools" that may have deleted your phone's nvram and restoring it can even be harder. tell someone to upload you the boot.img from there clockworkmod folder.. my laptop is currently not with me and that's where all my files are.. when you get it flash the three files again

Its ok but @least I still have the clockworkmod of the previous state of the phone I.e when it still stuck at bootloop just dat my mtk droid tool is misbehaving right now so I can prepare those files and flash back to previous state
all the same tanx

Codedboy95:
what's the size of the recovery.img you flashed ?.. 16mb or 6.1mb (it doesn't matter tho) i will upload another boot.img (16mb) for you later today so you should flash the 3 files again preloader, recovery.img and boot.img .. if it doesn't work now you should take it to calcare.. or if you stay in lag i can help you fix it.. i don't know about the nand file
https://forum..com/thread-159.html#sthash.eNJgkIHV.dpbs

I used that of 6.1mb plz help me generate another files.most importantly preloader cos the phone is no longer starting at all tanx

Codedboy95:
the boot.img should fix it , how did you flash it?

I selected the scatter file from its location and same for the boot.img ,recovery, and preloader then clicked download. switched off the phone and connected. the loading bar went successfully and showed OK it stucked at bootloop. I then decided to perform format from spft after that it stopped booting as well as charging. now am afraid I may hv used the wrong preloader file but its definitely the one u uploaded.
another is that when I run memory test it shows that nand file is missing

Codedboy95:
preloader.bin download here https://www.dropbox.com/s/t5aryl9hbj1fvzv/preloader.bin?dl=0
I will upload the boot.img later..
#edit which do you need ? the one made from cwmr and the stock one ? ... this is the one from cwmr https://www.dropbox.com/s/l1ymkylnjb44a5z/boot.img?dl=0

Thanks bro I've flashed everything yet no show I think the only option am left with is to look for someone who has same phone in my neighborhood to flash stock rom
just learning my lesson the hard way

Codedboy95:
no more fear of bricking download h6 recovery.img here
https://www.dropbox.com/s/0mm95lpoldqzxxz/recovery.img?dl=0.

@Codeboy95 I bricked my phone with chainfire
but after flashing it with the recovery u
uploaded am still stucked at bootloop plz can
u help me with boot file and preloader my
head is just getting hotter tanx

salmaz:
@Codeboy95, pls can you help me with Tecno F6 recovery.img to flash cwm recovery on my Tecno F6.

@Codeboy95 I bricked my phone with chainfire but after flashing it with the recovery u uploaded am still stucked at bootloop plz can u help me with boot file and preloader my head is just getting hotter tanx

Codedboy95:
and you didn't have cwmr installed ?..

I didn't ooo

omosomofamarvin:
please which application can I use to save d life span of my ba3 while chatting and browsing? Pls reply

Omo using an application to save battery during browsing may not help a lot especially if u are on 3g. the best u can do is to lower ur screen brightness and ensure network coverage is ok or better still stick to 2g.

Codedboy95:
you just joined nairaland ?. anyways i added a file to the post.. check again.. it's after my forum signature

sorry for bothering u I got it now. u know the problem with newbies. tanz a lot .
I stupidly bricked my phone with chainfire

Codedboy95:
i uploaded the scatter file some weeks back. which recovery do you want to flash again.. everything you need is on this thread just read back..

I saw ur post bro but there is no link to it for download tanx

plz gurus in de house I am desperately in nid of h6 scatter file to flash recovery plz plz plz help