₦airaland Forum

Tinubu with his backyard economy.

Penuelseun:
Going by the picture you posted, your battery is not charging as the solar input voltage is very close to battery voltage, in what configuration are your panels arranged? You will need to get an external meter to confirm your solar input

the solar panels are connected in parallel.

Penuelseun:
A picture of the display during sun hours will be great

that's what I added above.

futurenix:
If this is during sun hours then take it to their service center cause 54V from PV can't charge a 54V battery.

Had a similar issue with a client's just 6 weeks after installation and they fixed it at the service center.

thanks very much, it was in the evening. It actually charges the battery but the warning sign keeps showing. Its sunny here and below is what's showing.

Please my Felicity charge controller 100Amps is showing warning sign code 20. The issue is that my battery is charging but the code removed the watts and amps reading on the controller. My system is a 5.5KW inverter with 12 300watt Canadian used panels. Please any solution?