₦airaland Forum

How to download & install Software for JLR DoiP VCI SDD Pathfinder ?

1. Log in official website: www.autosos.com.cn



2. Go to“Technical Support”



3. Click the “Software download” （Chinese word like “路虎软件下载”）; Then you can download SDD and PathFinder. Meanwhile, it will take you about 2 or 3 days to download the complete data of PathFinder with network continuously.



Tips:
When the download finished, one more thing you need to do is to install driver ( VCI manager);

If you have already got an account which can log in the software FathFinder directly, then you can use it for your job. However, you can contact us for support if you do not have the account.

How to install driver for the interface-DoIP VCI ?

1. Click the“技术支持”，then choose the “driver download”（Chinese word like “路虎DOIP VCI驱动下载”）You can follow the picture below.
By the way, the password for driver download: g0f0

2. Please pay more attention to the version of the DoIP VCI driver, it always should be the latest version. So you should update the driver without delay. how to install DoIP VCI driver



3. The connection of DOIP VCI :Connect with USB; (It’s easy for you.) ,Connect with WIFI ; (You can choose the Wifi named “DoIP-VCI-11D4”, and the last four numbers are random.)



4. The Connection between the DoIP VCI and computer
Following the picture below, open the VCI Manager and click the “connect” （Chinese word like “连接”）



5. Check the connection status with the computer.
Refer to the figure below, when it shows a green check mark, run is ok.



6. Update of DoIP VCI’ firmware.
Open“VCI manager”;
Then click the “VCI Update” （Chinese word like “VCI更新”）;
Click the “start” （Chinese word like “开始更新”)and you can get the update progress on the right;

Attention:
When you click the “start”, it cannot be interrupted or stopped. Otherwise the DoIP VCI will be damaged. You can disconnect when it finished.



7. SDD can detect the hardware directly, it’s perfect if the icon is green.
PathFinder need to set the network interface.
Log in with account firstly;
Click “cancel” （Chinese word like “取消”）;
It don’t connect successfully if it shows “SIM” “SimFiles”, you should change them into “JLR-JLR-DoIP, D-PDU API by Bosch” “86004905”. Now you can use it for diagnosis.


https://chinaobdtool.net/2023/01/28/how-to-download-install-software-for-jlr-doip-vci-sdd-pathfinder/

This JLR DoiP VCI SDD Pathfinder Interface is original .and that have two software (SDD Software and Pathfinder software).


I will introduce the two software for your reference as following :

1: SDD Software :
When you Unzip the SDD software into C disk ,you can find two folders here , one is the SDD Online batch Launcher, and other is SDD Offline batch launcher .(please note : 1:For the SDD offline programming ,you just run one time that is ok. 2: Open the SDD Software , 3: enter the offline account : XIUXIANGBIAO password : XIUXIANGBIAO9527 )

You need not activate it again after activate well.

2: Pathfinder software :
Patherfinder we have the online diagnostic , if you want to online programming ,you need have the online account ,if you do not have the account ,you need Purchase from original factory ,then you can do online program.

we will offer one independent account for your reference : Account : CJ-TLZ password : CJ2021
Enter any number for the work number
Independent person account ,you need note :

1: adjust the computer time to the current time .
2: Computer must connect with internet.
http://crp129.com/2022/01/20/jlr-doip-vci-sdd-pathfinder-interface-two-software/

I successfully completed the work in Colorado with OBDSTAR Odo Master, here is the operation path:

Mileage -> Americas -> GM -> GM V31.11 -> Chevrolet -> Colorado -> 2018 – > odometer recalibration -> This function is available by connecting the server, please ensure the internet connection is normal.

Alright, the next operation is to follow the on-screen guide.

http://cheapobd2scanner.com/2022/01/20/2020-chevrolet-colorado-odometer-recalibrates-by-obdstar-odo-master/

If your car/truck key is lost or the key fob is broken, getting a replacement can be a hassle – and depending on what kind of vehicle you drive, it can cost a pretty penny. A car key programmer allows you to reprogram keys, program new keys, and adjust the IMMO system to get back on the road, saving you both time and money. This article is intended to distribute the Nissan Car Keyprogramming Demo via Launch X431 V+ Diagnostic Tablet to all customers

Main Operation Steps:

Turn on the X431 V+ diagnostic tablet and click on “X431” icon on the Home menu.

Tap on “Reset”>>IMMO>>Agree to the Disclaimer

Next is to choose the Vehicle models that you want to perform the test on.
For this key programming demo, we will select “NISSAN”.
It reminds us to “turn on the switch”.

Reading Vehicle Information. And it will show the car VIN number, mode, year and system Number.

Choose “Quick Match Test”>>When Performing Key Registration

For my 2012 NISSAN PIN is 6014, for NISSANS below 2010 PIN is 3536.

Here, input Immobilizer Code (PIN) for Initialization.

It begins the “Initialization ECU process”.

Registration Key>>Complete Registration Key>>Registration Key ID

Now, insert mechanical key into ignition KNOB and press any button on the intelligent key.


Registration Key Completed!

When register all the intelligent keys, press “Next”.

Last step is to check all your registered keys.

http://cheapobd2.com/2021/12/28/launch-x431-v-program-nissan-car-keys-sucessfully/

Cummins-INLINE-7-Data-Link-Adapter-1

Cummins VERY LATEST INLINE 7 Data Link Adapter：
It’s like adding a turbocharger to Electronic Control Module downloads and uploads. Cummins new INLINE 7 Data Link Adapter has a faster processor, more robust algorithms, larger memory buffers and more sophisticated filtering than previous models while simultaneously accessing multiple vehicle data channels. INLINE 7 supports USB, WiFi and Bluetooth technologies in a single device. INLINE 7 communicates with your PC and is designed for future capability with mobile products.

Cummins Inline 7 Data Link Adatper VS Cummins Inline 6:

What You Will Receive:
1pc x Cummins INLINE 7 Data Link Adapter
1pc x DB26Pln-OBDll Cable
1pc x USB Cable
1pc x DB26/2Pin/3Pin Cable
1pc x DB26/9Pin Data Link Cable
1pc x 3Pin Connector
1pc x 3Pin Connector
1pc x Software Compact U disk
http://wholesaleobd2.net/2021/12/25/cummins-inline-7-data-link-adapter/