Digitman:
Please take note that the signal on 12645 v 30000 does not necessarily come up because your dish is facing 28.2 e (Joy tv) Because the signal is not the same strength as that of joy tv. However you can possibly solve this by making sure that the signal on 12525 v 30000 of high quality. So push the signal strength to the limit. From 70 percent up.
Another thing that will make the signal to not come up is when you're running a multi lnb setup and 28.2e is not your primary lnb. That way, you and I know you have reduced the possibility of other frequency in that sat bedside joy tv ((12525 v 30000 ) to have a better signal strength.
All the above listed is some of the possible cause of the signal not coming up when you have upgraded the software.
If I ware you, I will just forget other Sat position for now and turn my primary lnb to joy tv position and get the best, highest signal possible. Go to my decoder, check the signal on 12645 v 30000. Once it is green, I will scan, view the channels to be sure I have succeeded in getting the multistream function on my decoder. Before I will, then go back to my dish to put everything else in place to suit whatever old channels I was viewing before I decided to be interested in the multistream function.
You can try boosting the signal on this frequency to its maximum, then go back inside and try
12605 v 30000 Baba, u are on points, all u posted are valid. 28.2E is secondary, I just put it on 26E. I have done some adjustments, bam! The signal pops up, got all the channels, but still not stable. Lnb should be on what time? 2'oclock, 3, 4, or 5? Thanks man. |
Satellite TV Technology › Re: Free To Air Satellite Tv General Thread by Oshomo123: 2:34pm On Nov 13, 2020
