Technical Parameters Of T500 Tension Controller
Input power: single-phase power supply AC 185-264V,50/60HZ
Output power: power supply DC 0-24V, 4A MAX
Applicable models: mask machine, magnetic powder clutch brake, voltage regulator supply
External control signal: 0-10V, corresponding output 0-24V
Installation methods. floor model, wall-mounted. embedded
Required environment: 0-40C, relative humidity<80RH
Advantages Of T500 Tension Controller
1. It has a simple tension calibration process and accurate tension measurement, with high stability and reliability.
2. Receive single/dual sensor input signals, adapt to various tension sensors
3. PID control to ensure the operation without tension overshoot
4. Metal shell with strong anti-interference capacity without sparks
5.Tension is automatically controlled with only a few key button presses making it the easiest controller.
https://www.arisewebguiding.com/products/detail/t500-t1000-web-tension-controller.html

Cqstart can provide an alternate startup option for other engines, a spring starter. It is based on different principles comparing with the kicking starter of a motorcycle. It can start a diesel engine in any special environment by releasing the spring’s potential energy. Cqstart spring starter, using a simple mechanical mechanism, stores the energy by compressing the springs and releases the spring’s potential energy by pulling the trip lever to turn the engine’s flywheel. The mechanical spring starter can apply to emergency generator sets, lifeboats, firefighting sets, emergency pump sets, construction machines, power plants, irrigation and drainage device, etc.

https://www.cqstart.com/

The inflatable life raft is essential survival equipment, which is used for emergency escaping from dangerous areas or evacuating from wrecked ships. An inflatable life raft is a type of life raft which allows people to fold and store it when not in use, or inflate it at the time of an emergency. It is safety equipment is mandatory on board sea-bound vessels. The emergency life raft is SOLAS standard with EC, ABS, DNV-GL, CCS certified. YSmarines brings the customers advanced design and high standard durability to the inflatable life raft including self-life raft, throw-overboard life raft, open-reversible life raft, etc for sale, the most competitive price guaranteed.

Among the web guide machines, the Arise web guide system for the mask machine is easy to operate and install. With the system, the maximum speed of the mask machine can reach 500 pieces/minute, and the maximum speed of N95 (KN95) mask machine can reach 3000 pieces/minute.
https://www.arisewebguiding.com/

The engine is the source of power, bringing power to modern society. While the engine must be started by a starter. The common starter is an electric starter that needs a battery to provide energy. Other starting methods like air starter, require an external system to provide energy. All of them rely on external power. Once it lacks external power, the engine is “dead”.

The mechanical starter is the ideal solution during the above situations. Cqstart spring starter, using a simple mechanical mechanism, stores the energy by compressing the springs and releases the spring’s potential energy by pulling the trip lever to turn the engine’s flywheel.

JIS F 2007-1976 mooring Pipe is one of the bulwarks mounted marine mooring chocks, which is used to guide or lead the mooring ropes. The JIS F 2007 mooring pipe is also known as the JIS F 2007 closed chock, installed on the bulwark of the ships. The material of the mooring pipe is cast steel according to JIS G 5101 which is usually in ZG230-450 in China. Its inside shape of the mooring pipe makes the surface more smooth and can reduce the friction of the mooring ropes. And there are many stiffeners on the chocks to make the mooring chocks or closed chocks have higher SWL and much more stable on the bulwark during installation. It has two types according to its shape, which includes an oval-shaped mooring pipe and a circular shape one. The nominal size of the mooring pipe ranges from 150mm~500mm.
https://www.ysmarines.com/products/detail/mooring-pipe-jis-f-2007-1976-standard.html

1. It can inspect and control the coils of any material and color.
2. Precision ball screw with accurate positioning
3. The tracking speed can be adjusted arbitrarily without changing the size of the belt shaft.
4. The guide roller can be equipped with a hard-anodized layer, rubber layer, and cork skin.
5. The fast feedback for the voltage and electric current, which can automatically restore and protect the internal circuit system, with good stability, quick action response. The tracked objects will never drop the needle or wrinkle.
6. Humanized design, complete functions with fast and easy operation.
https://www.arisewebguiding.com/articles/detail/web-guiding-system-edge-position-control-solution.html

JIS F 2007-1976 Mooring Pipe is one of the bulwarks mounted marine mooring chocks, which is used to guide or lead the mooring ropes. The JIS F 2007 mooring pipe is also known as the JIS F 2007 closed chock, installed on the bulwark of the ships. The material of the mooring pipe is cast steel according to JIS G 5101 which is usually in ZG230-450 in China. Its inside shape of the mooring pipe makes the surface more smooth and can reduce the friction of the mooring ropes. And there are many stiffeners on the chocks to make the mooring chocks or closed chocks have higher SWL and much more stable on the bulwark during installation. It has two types according to its shape, which includes an oval-shaped mooring pipe and a circular shape one. The nominal size of the mooring pipe ranges from 150mm~500mm.
https://www.ysmarines.com/products/detail/mooring-pipe-jis-f-2007-1976-standard.html

The web guiding system covers a wide range of applications, and it is essential in industries such as packaging, non-woven fabrics, printing, labels, building materials, paper pulp, household paper, plastics, cables, metal processing, corrugated paper processing.

The closed chock is made according to the standard of ISO 13729. The type of mooring chock is normally applied for the ship which uses wire ropes. The radius of the surface was designed based on the bending ratio of rope through the chock of not less than twelve times the wire rope diameter. The foundation of the closed chocks shall be determined by considering the actual load direction. The foundation and welding connections to the hull shall be guaranteed reliable transmission of the maximum loading to hull construction without any plastic deformation or cracks. The ISO13729 chocks can also be classified into two types by its installation site including deck-mounted closed chock and bulwark mounted one.

Mounting
1. Make sure to install the guide correctly according to the direction of the roll paper and the marks on the roller platform. The sensor must always be downstream on one side of the material flow.
2. Fix the guide on the machine by using the supplied bolts
3. Tighten each bolt with a wrench by hand until each bolt is firmly locked. Do not tighten the bolts.
Installing the sensor
1.The sensor assembly consists of a sensor head, a sensor connection cable and two sensor carriages with M3 thumbscrews. All these elements are shipped from the factory.
2.Assemble into a ready-to-install unit.
3.Each sensor carriage will have a locking thumbscrew. Loosen the two thumbscrews to allow the carriage to slide into the sensor guide, which is installed under the roller assembly on the downstream side of the roll paper guide.
4.There is a filter cover (infrared or visible filter cover) on the surface of the sensor. When the sensor assembly slides into the guide rail, make sure that the filter cover faces the roll paper material.
5.After installing the sensor to the sensor rail, install the plastic end cap on the end of the rail. Clip-on plastic end caps are usually equipped with roll paper guides.
6. After installing the sensor, connect the sensor connector at the end of the sensor cable to the sensor port on the connector interface on the other side of the housing assembly.
Pre-wired
In the pre-wiring option, the equipment may be supplied with a 2.5-meter power cord (via compression nut) for customers to connect to a properly grounded 24 VDC power source.
Grounding
For safety and normal operation, a web guiding system is an equipment used by the web and the installed guide plate must be properly grounded. The ground screw on the back connector is to connect the ground wire interface.
https://www.arisewebguiding.com/articles/detail/how-to-install-the-web-guide-system.html

Before each order we signed with our client, our client always asks a question: why should I choose your spring starter?
Actually, we are not only focusing on products but also pay attention to our services. As a supplier, we can provide you our standard spring starters with type code. Besides, we can provide you non-standard products according to your needs. Such as different sizes, different sizes of gears, different colors, and different quantities of the disc springs. If you are looking for an ODM supplier, we can also accept your company logo on our spring starters.
During the whole production, we have strict rules for quality control. All the Cqstart spring starters have passed the test on the unique spring starting test bench, ensuring that all the products are qualified and there are detailed test data for each product (such as torque, energy, peak, speed, input/output ratio, conversion rate, stability ratio, curve, etc.).

Marine passenger chairs can be used on the fast ferry, high-speed passenger ship, cruise ship, catamaran, crew boat, cargo ship, the sightseeing boat, traffic boat, pilot launch, yacht and other passenger vessels. The material of the seats adopts fire-proof leather, PU/PVC leather, or fabric according to the customer's requirements. The anti-corrosion aluminum structure is durable. The marine passager seats and chairs provided by YSmarines are made according to ISO Standard and IMO Standard. They all have beautiful appearance and special design which makes people more comfortable when seating.

Coil materials refer to long-sized continuous materials such as paper, film, sheet, non-woven fabric, metal foil, silk, thread, etc. In the process of uncoiling, technological processing, winding, etc, deviation of the coil materials may occur, due to the deviation of the coil itself or the processing machine. The web guiding control system provides a solution to reduce the occurrence of such situations. The system always tracks the position of the coil material during the production and makes corrections in real-time. It can ensure and improve the quality and efficiency of production.
https://www.arisewebguiding.com/articles/detail/web-guiding-system-edge-position-control-solution.html

During the whole production, we have strict rules for quality control. The Cqstart spring starter has passed the test on the unique spring starting test bench, ensuring that all the products are qualified and there are detailed test data for each product (such as torque, energy, peak, speed, input/output ratio, conversion rate, stability ratio, curve, etc.).
https://www.cqstart.com/pages/about-us.html

The marine mooring bollard is a post used on ship’s deck or quay. It is a simple and cost-effective way to fulfill mooring requirements and safely secure vessels alongside jetties, berths, wharves and dolphins in ports and harbors. It is welded by qualified steel tubes with plates. Different types and sizes of the bollards are for sale at YSmarines with the best price, which including the single cruciform bollard, double cruciform one, NS2584 type one, DIN 82607 one, ISO13795 one, ISO13797 cruciform one, JIS F-2001 one, GOST11265-73 double cruciform one, dock bollard and another customized type bollard according to the requirement of clients.

The mask machine is used to produce various masks with certain filtering performance through a series of processes including hot pressing, folding and forming, ultrasonic welding, waste removal, ear belt and nose strip welding of multi-layer non-woven fabric. In the production of masks, multiple layers of materials must be neatly bonded together, otherwise waster or even jams will occur. The web guiding system can achieve multi-layer material alignment, no waste in the refueling process and the jam never occur. The web guide is a selectable correction controller for tracking the edge of the material or printing lines for high-accuracy swing.
https://www.arisewebguiding.com/pages/web-guide-for-mask-machine.html

The web guiding is to guide the sensor to emit infrared or ultrasonic to monitor the operation of the coil material and send a signal to the controller. After that the controller finds that the web has a positional deviation, according to the preset command by the controller, the controller controls the drive system to swing to correct the web position.

The web guiding control system provides a solution to reduce the occurrence of such situations. The system always tracks the position of the coil material during the production and makes corrections in real-time. It can ensure and improve quality and efficiency of production.
https://www.arisewebguiding.com/pages/about-us.html

YSmarines is one of the main suppliers and exporters of marine and offshore equipment in China. As a supplier specialized in an extensive range of equipment for shipbuilding and ship repairing, we have been doing this for more than ten years all over the world. The equipment we can supply include marine propulsion system, marine electric system, marine deck machinery, mooring equipment, marine auxiliary equipment, life-saving equipment, fire-fighting equipment, marine hardware, and offshore equipment, etc.
https://www.ysmarines.com/

YSmarines is one of the main suppliers and exporters of marine and offshore equipment in China. As a supplier specialized in an extensive range of equipment for shipbuilding and ship repairing, we have been doing this for more than ten years all over the world. The equipment we can supply include marine propulsion system, marine electric system, marine deck machinery, mooring equipment, marine auxiliary equipment, life-saving equipment, fire-fighting equipment, marine hardware, and offshore equipment, etc.

Tool cabinets are the perfect combination for your tool storage system. The two extra deep and full-length drawers provide convenient storage for larger and longer items. It is designed to handle heavy usage with its all-welded steel construction. The outside is coated with a textured powder paint finish with rust-resistant properties. For added security, both the chest and cabinet are fitted with a barrel key and lock system. Use tool cabinet to keep your garage neat and organized.
https://www.sanji-first.com/tool-cabinets-chests/

Adamite rolls have a carbon content of 1.5% to 2.3% with various alloy elements such as Cr, Ni, Mo, and V. Generally, the mass fraction of free carbides is about 6% to 10%, with small hardness drop and high wear resistance. The rolls have high performance, good toughness, significantly reduced consumption, improved surface quality of profiles and rail beams, etc. They are widely used to replace cast steel rolls and low-alloy cast iron rolls, such as large-sized steel rough rolls, profile steel rolling mills, intermediate rolling mills, work rolls in the hot rolling strip continuous mill, etc. The carbon content and alloy element content of the semi-steel rolls are adjusted according to the applications of the rolls and the corresponding heat treatment process is used to control the roll structure with different matrix, carbide content and morphology to meet the requirements of different rolling mills.

Cqstart spring starter is a kind of starter which transform manual cranking energy into disc spring potential energy. The potential energy can be released all in once so as to start the engine. Best starting solution for the "black-start" or "dead-ship start". (often called hand starter, spring motor, mechanical starter, spring-powered starting device, etc.)