₦airaland Forum

twinskenny:
I will be removing some barb wire from a site Tommorow… we are replacing them with electric fence.: if you are interested in the barb wire let me know.. it’s freshly installed less than two weeks… I will be given it out for free.. but you take care of logistics


Sure location is Meran lagos

interested sir... can i have your number or text me 08162907678...

Icecream4U:
Selling what is left of the gerard sheets I used in roofing my house. Shingle design, About 20 squre meters left.

Selling at 3k per squre meters. I also have some badge board and facial board left too.

Call or whatsapp 07043602503

I think u should keep them for future maintance of the roof, u can use it for generator house etc

diordaves:
Is the space internal or external?

Interior. Thanks

n3xt:
Buy a cheap rug or carpet.

Thanks for the suggestion but they can actually wee on the rug n it will smell badly. I don't think carpets last long as they tear easily

KelvinCoaster:
I suggest you buy cheap synthetic turf.
This should be safe for children to play on.
My opinion!

Thanks for your suggestions sir but will that work for an interior space?

luvablesam:
Thanks for the suggestion but they can actually wee on the rug n it will smell badly. I don't think carpets last long as they tear easily

Get re-usable second hand tiles, or broken tiles,

This looks intresting to me. A question though, how long (years) can these batteries last before changing them? Thank you.

topsy23:
Using a solar hybrid inverter will minimize the consumption on NEPA. U will pay less only if you are using prepaid meter. I don't know if your solar inverter will be able to power all your AC, if it can power all tye AC then you will hardly use NEPA.

I have a client that installed 25KVA solar hybrid inverter for his duplex and decided not to connect to national grid(NEPA). But he spent huge amount of money installing the solar then . 72nos of DECAGEL(made in USA) baterry installed which can last for 24hrs on full load.

luvablesam:
Interior. Thanks

Did you do German floor? If yes, then the floor will not be smooth. In this situation, smooth (polish) off the floor and cover with vinyl (rubber) carpet.

If you did not do German floor, fill up the floor, polish off and cover with vinyl carpet. I can't see any other way.

Ggee:
This looks intresting to me. A question though, how long (years) can these batteries last before changing them? Thank you.

3 to for years sir

somehow:
support@gritymarket.com

Mail sent

Good evening everyone.

Please I need your help and advice both professionally and by experience.

I recently did a 40ft tank stand for a client and there are going to be six(6) 750 gallons. The issue is that the plumber said the client should buy a pumping machine after buying a sumo.

So my question is,is that necessary. Isn't the sumo enough to pump water to the tanks and then gravity will bring it down. The plumber is saying that the sumo can't do that job effectively and should be supported by a pumping machine.

topsy23:
Mail sent

Noted

luvablesam:
Hello, Please I will be needing everyone's opinion on this;

I have this small space I created for kids, I don't wanna install tiles now on the floor(money issues).

What are the cheaper options to tiling apart from just cementing the floor?

I need help. Thanks

What is the floor now?

michlins:
Good evening everyone.

Please I need your help and advice both professionally and by experience.

I recently did a 40ft tank stand for a client and there are going to be six(6) 750 gallons. The issue is that the plumber said the client should buy a pumping machine after buying a sumo.

So my question is,is that necessary. Isn't the sumo enough to pump water to the tanks and then gravity will bring it down. The plumber is saying that the sumo can't do that job effectively and should be supported by a pumping machine.

First of all, are you contracted for the plumbing job as well? If no, from experience please don't get involved. Perform your contract to specification and leave.

Are you asking just for the knowledge and experience? If so, is the water source from a borehole or well? You would normally need the right capacity submersible sumo for the borehole to transfer water to the overhead tanks and gravity kicks in and do the rest.

If it is a well, you would normally settle for a pumping machine instead to transfer the water to the overhead tanks.

However, if the plumbing network is complex like a huge project, you MAY need a pressure booster. Not an additional pumping machine. It is possible but I have not experienced where a sumo and a pumping machine are combined for strength to transfer water overhead.

So like I said earlier, be careful how you get involved in this. Unless this is included in your contract, allow the client and their plumber to sort this out. Or are you the one who recommended the plumber?

somehow:
Noted

If you check the quote very well you will see option 1 and option 2 for 15KVA and 25KVA.

He picked the one highlighted in RED

michlins:
Good evening everyone.

Please I need your help and advice both professionally and by experience.

I recently did a 40ft tank stand for a client and there are going to be six(6) 750 gallons. The issue is that the plumber said the client should buy a pumping machine after buying a sumo.

So my question is,is that necessary. Isn't the sumo enough to pump water to the tanks and then gravity will bring it down. The plumber is saying that the sumo can't do that job effectively and should be supported by a pumping machine.

If there's appropriate sizing of discharge pipes, and adequate head( height of the tank), definitely there's no need for any booster pump, the water will flow well, but most of the plumber size their pipes based on rule of thumb or experience, having the booster pump is like their backup plan,

I will still advice you not to intervene unless if it's going to affect you, but if not man your business, those guys might take you as enemy, some might be looking for your fault or your weakness,

Pls btw Bio digester(Modern Soakaway) and the old method soak away, which is better?

Buy a property you are certain of an increment in years to come, you not sure of how to start?
Call/WhatsApp: 08102007518, Let's help you put your funds in the right property.

Welcome to another Prosperous week....
We are open for business....
For your Approval and Construction Services Drawing of Mechanical Electrical and Plumbing services Installation drawing.....
We are available......

Sanitary wares are also available....

topsy23:
If you check the quote very well you will see option 1 and option 2 for 15KVA and 25KVA.

He picked the one highlighted in RED

okay. I will check it through.

Lampert505:
Hi y’all
I greet everyone that has keep the thread moving and making positive impacts in all nairaland’s life...


My question is,what are the document to be considered when one is buying in a land?

I’m tryna buy a land at the treasurehill park estate ikola, and they said I’m meant to pay the following

“ 50k for Survey
10% of land price for Legal and Documentation fee
And for the developmental fee 500k”


I want to ask if all of this is legal...

Y’all contribution will be forever appreciated

Since you're buying into their Estate, it's no longer a question of legality.

They decide what they want. It's up to you to accept or leave.

Good morning my ogas in d house... pls sir am trying to mould my block on my site in kwara state due to finances.. wen i but d land last year November 4cornerpie 9"block was 180... dis year April 9inches was 200.. as at now is 270,300. And I need like 2000 9inches block.. if i should mould manually it will be 341,000 , (workmanship is 700 per bag but promised to give him 1000) i contracted a machine block moulder man dis is d quotation he sent.. which should i use pls. He is bringing d machine to my site and is d same ilorin.. owe much should i pay him last....

COST OF PRODUCING 2,000 BLOCKS 9"
Block sand 40tns@#2,400=#96,000
Cement 50bgs@#3,500=#175,000
Workmanship=#200,000 water=19000
Total=#490,000
@spyder,@egunmogaji@next@kolashange one pls advise me, am working on a tight budget

The estate is around ikola Alagbado,very close to command ipaja

Do you feel the 10% of price land isn’t it?

I’m confused here

folmus:
This one be like one chance.

What is the name of the developer?

50k for a survey? in Lagos?

Most developers have a fixed amount for documentation, not 10% of land price.

Shine your EYE WELL WELL

Icecream4U:
Selling what is left of the gerard sheets I used in roofing my house. Authentic roofing new zealand. Shingle design, About 20 squre meters left.

Selling at 3k per squre meters. I also have some badge board and facial board left too.

Selling

cuddling44:
Good morning my ogas in d house... pls sir am trying to mould my block on my site in kwara state due to finances.. wen i but d land last year November 4cornerpie 9"block was 180... dis year April 9inches was 200.. as at now is 270,300. And I need like 2000 9inches block.. if i should mould manually it will be 341,000 , (workmanship is 700 per bag but promised to give him 1000) i contracted a machine block moulder man dis is d quotation he sent.. which should i use pls. He is bringing d machine to my site and is d same ilorin.. owe much should i pay him last....

COST OF PRODUCING 2,000 BLOCKS 9"
Block sand 40tns@#2,400=#96,000
Cement 50bgs@#3,500=#175,000
Workmanship=#200,000 water=19000
Total=#490,000
@spyder,@egunmogaji@next@kolashange one pls advise me, am working on a tight budget

I’ve never produced my own blocks so I’ll defer to others with experience.

One thing though is supervision. You need to ensure that they won’t take shortcuts with the mixture,

Good luck on your project.

Limited stock! HURRY!!

Quanta 200a battery ..... 150,000 "hups"

Leoch 200a battery ... 145,000

Starplus 220a Tubular battery ... 120,000

Exulted 230a Tubular battery.... 125,000

Genus 230a lead carbon Tubular battery... 140,000

Quanta 12v 200a battery .... Unit price 147k , 2 units above 146k

Debull 12v 230a tubular battery ... Unit price 130k , 2 units above 125k


Ritar 200AH 12V battery price is 140,000/- per battery.
Quantity price : 135,000

Ritar 150AH 12V slim ..... "Expecting"

Ritar 105AH 12V Slim ... "Expecting"

CD Techno 12v 196a slim battery ....185k

COSMOS BATTERY Available Now With One Year Warranty!

12v 7.5ahs Battery... 7,000.00

12v 100ahs Battery... 60,000.00

12v 200ahs Battery.. 115,000.00

12v 250ahs Battery.. 130,000.00

MERCURY BATTERY Available Now With One Year Warranty!

Mercury 100ahs deep cycle battery ..60,000

Pure sine wave 1kva 12v inverter ... 65,000

Schneider 850va 12v pure sine wave solar inverter .. 66,000

Schneider 1.5kva 24v pure sine wave solar inverter .... 80,000

All brand new with standard warranty!

Contact,
Smartcell global services
CALL LINE: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

cuddling44:
Good morning my ogas in d house... pls sir am trying to mould my block on my site in kwara state due to finances.. wen i but d land last year November 4cornerpie 9"block was 180... dis year April 9inches was 200.. as at now is 270,300. And I need like 2000 9inches block.. if i should mould manually it will be 341,000 , (workmanship is 700 per bag but promised to give him 1000) i contracted a machine block moulder man dis is d quotation he sent.. which should i use pls. He is bringing d machine to my site and is d same ilorin.. owe much should i pay him last....

COST OF PRODUCING 2,000 BLOCKS 9"
Block sand 40tns@#2,400=#96,000
Cement 50bgs@#3,500=#175,000
Workmanship=#200,000 water=19000
Total=#490,000
@spyder,@egunmogaji@next@kolashange one pls advise me, am working on a tight budget

Moulding your blocks will always be far better than buying blocks both in terms of cost and the quality of the blocks. But to achieve this, you must be on ground to supervise the moulding, otherwise it will end up being better you purchased from an industry.

Good luck!

HURRY WHILE STOCK LASTS!!!

Feel free to reach us if interested in any of these products:

Growatt 3KW/24V TL
Growatt 3KW/48V TL
Growatt 5kw/48v HVM
Growatt 3.5kw/48v SPF ES(Batteryless)
Growatt 5kw/48v SPF ES(Batteryless)
Growatt 6KW/48V
Growatt 8KW/48V
Growatt 10KW/48V
Growatt 12KW/48V

All Inverter size has Inbuilt MPPT Charge Controller

Lithium Batteries

Pylontec Lithium-ion Battery – US 2000 48v/2.4kwh
Pylontec Lithium-ion Battery – US 3000C 48v/3.6kwh

SHOTO lithium battery

Felicity Products/ lithium batteries

Phocos power inverter

Deka 12v 210a battery

USA Trojan 12v 170a tubular battery

USA Trojan 12v 205a battery.

CD AES batteries

Exide batteries

Quanta batteries

Multipower batteries

Leoch batteries

Schneider products

Monbat EU Batteries.

Contact,
Smartcell global services
CALL LINE: 081-350-31951
WHATSAPP::: http://.us/w/?c=a46ea5

EgunMogaji2:
I’ve never produced my own blocks so I’ll defer to others with experience.

One thing though is supervision. You need to ensure that they won’t take shortcuts with the mixture,

Good luck on your project.

Thanks sir

Hatesin:
Moulding your blocks will always be far better than buying blocks both in terms of cost and the quality of the blocks. But to achieve this, you must be on ground to supervise the moulding, otherwise it will end up being better you purchased from an industry.

Good luck!

Tank u sir.... I will be on ground
D machine moulder man is demanding for 200k for 50 bags of cement at 40 per bag for 9inches.. d hand moulder is demanding 700 per bag but i promise to pay 1000 for a good job... how much should I negotiate with the machine guy..