babaegun:
@Ojeysky

I will contact you on Whatsapp shortly. I need your help on HA.

Thanks.

Valto:
u have moderate load. u need a
24v 3kva hybrid inverter
24v 280ah Lifepo4 Lithium batteries.
about 3000w of solar panels
budget atleast 1.5m

eliteweb:
WAHALA UNA SAY NO DE FINISH!

Few months ago I started my solar journey with a 3kva/24v Gennex Hybrid Inverter with 60A MPPT Charger inbuilt.

My PV arrays are 355W x4. (Canada Panel)
with 2 De-Bull 230ah tubular batteries.

After installation, the batteries were left to charge for 2 days without any load on the inverter.

After one week of installation and usage, running a moderate load of about 150w all around, the batteries started entering low mode. sometimes, as soon as the charging sources are switched off, the battery indicators drop 2 bars out of 4 to show inky 2 bars of battery reserve left without any load.

After going back and forth and taking the batteries back to the dealer to be charged etc.., the engineer of the company told me that I need add more panels.

Today I changed the batteries to dry cells, and also got same results of battery indicator dropping to 2 bars when d sun has gone off.

Could it be that my Inverter ain't charging the battery properly or the Inverter is draining the batteries?

eliteweb:
WAHALA UNA SAY NO DE FINISH!

Few months ago I started my solar journey with a 3kva/24v Gennex Hybrid Inverter with 60A MPPT Charger inbuilt.

My PV arrays are 355W x4. (Canada Panel)
with 2 De-Bull 230ah tubular batteries.

After installation, the batteries were left to charge for 2 days without any load on the inverter.

After one week of installation and usage, running a moderate load of about 150w all around, the batteries started entering low mode. sometimes, as soon as the charging sources are switched off, the battery indicators drop 2 bars out of 4 to show inky 2 bars of battery reserve left without any load.

After going back and forth and taking the batteries back to the dealer to be charged etc.., the engineer of the company told me that I need add more panels.

Today I changed the batteries to dry cells, and also got same results of battery indicator dropping to 2 bars when d sun has gone off.

Could it be that my Inverter ain't charging the battery properly or the Inverter is draining the batteries?

eliteweb:
WAHALA UNA SAY NO DE FINISH!

Few months ago I started my solar journey with a 3kva/24v Gennex Hybrid Inverter with 60A MPPT Charger inbuilt.

My PV arrays are 355W x4. (Canada Panel)
with 2 De-Bull 230ah tubular batteries.

After installation, the batteries were left to charge for 2 days without any load on the inverter.

After one week of installation and usage, running a moderate load of about 150w all around, the batteries started entering low mode. sometimes, as soon as the charging sources are switched off, the battery indicators drop 2 bars out of 4 to show inky 2 bars of battery reserve left without any load.

After going back and forth and taking the batteries back to the dealer to be charged etc.., the engineer of the company told me that I need add more panels.

Today I changed the batteries to dry cells, and also got same results of battery indicator dropping to 2 bars when d sun has gone off.

Could it be that my Inverter ain't charging the battery properly or the Inverter is draining the batteries?

ceaser:


This is a bad testimony after the possible many successful transactions the merchant has conducted here.

First, there are possibilities for errors by merchants during selection and shipping process. But once their attention is called to it, the alacrity and sincerity with which the error is quickly corrected to favour the aggrieved party (the buyer in this case) goes a long way to tell if customer satisfaction still remains number one priority after several successful sales. There was once a story here of a successful merchant on this thread who gradually slid into pomposity and insincerity and he was thankfully replaced just in time by people like justcallmenuel and wilmaria at that right moment. If these two mentioned merchants hope to remain relevant here and not go the way of that unnamed merchant, it is better to learn from his errors. Once you notice there is a problem with transaction, do well to quickly resolve it before it piques the buyer long enough to make him/her create a thread on it. One good business acumen is to know when to give in to a single customer's demands even if it means you losing a few bucks because in return, the good testimony will earn you trust and patronage from hundreds other customers.

I hope willmaria will sort it out and give us reasons not to worry.

Secondly, what dá hell is this new fad with merchants trying to fly the option of buying "used solar panels" from them when the initial conversation clearly indicated interest in buying new panels?

A buyer that I referenced to one of our numerous merchants reported back disaapointedly to me. First, the merchant tried to box him into getting extra of what he does not need - he needed three pcs 24v solar panels, but the seller tried to convince him that they (solar panel merchants generally) no longer sell odd numbers but in pairs. Please I need someone to corroborate or disprove this notion as merchant's new policy. So the buyer that needed three panels will need to either buy two pieces (one short of what he needs) or buy four pieces (one in excess of what he needs which won't be useful in the short term). He then said when he insisted to the seller that under no circumstance will he get one extra panel that he won't be needing, the seller then mischievously slid in the statement, "except you will buy fairly used which is the only ones we can sell in odd numbers".

Like wtf! If you stock used panels, that is your headache. Keep if for those who for personal reasons have solid interest in buying used ones, not trying to push your unsold stocks to buyers that had no interest in such in the first instance.

I await a time I will need to make personal purchases from my favourite merchants here and see if they come up with such funny attitudes. I pray to God I have a solid and reasonable replacement merchant standby and at the nick of time when such happens.



@bolded. I like this style sha o. Keep it up o. I go send buyers to you soon.



One is a coincidence. Two is a pattern already. Three is a sure behaviour. This is quite common with cables and wires purchased. Once the cable length is much, they end up sending you something short by two or three meters. They get lucky if the deficient kebght sent is still sufficient for your installation cos you may not notice. But if you're lucky and unlucky enough to discover because the wire length fron your panels failed to reach your controllers , and you complain to 'em, the next thing is to blame their boys. Meanwhile in some instances, na dem be the boys o;, shadowing for many shops simultaneously.

eliteweb:
WAHALA UNA SAY NO DE FINISH!

Few months ago I started my solar journey with a 3kva/24v Gennex Hybrid Inverter with 60A MPPT Charger inbuilt.

My PV arrays are 355W x4. (Canada Panel)
with 2 De-Bull 230ah tubular batteries.

After installation, the batteries were left to charge for 2 days without any load on the inverter.

After one week of installation and usage, running a moderate load of about 150w all around, the batteries started entering low mode. sometimes, as soon as the charging sources are switched off, the battery indicators drop 2 bars out of 4 to show inky 2 bars of battery reserve left without any load.

After going back and forth and taking the batteries back to the dealer to be charged etc.., the engineer of the company told me that I need add more panels.

Today I changed the batteries to dry cells, and also got same results of battery indicator dropping to 2 bars when d sun has gone off.

Could it be that my Inverter ain't charging the battery properly or the Inverter is draining the batteries?

eliteweb:
WAHALA UNA SAY NO DE FINISH!

Few months ago I started my solar journey with a 3kva/24v Gennex Hybrid Inverter with 60A MPPT Charger inbuilt.

My PV arrays are 355W x4. (Canada Panel)
with 2 De-Bull 230ah tubular batteries.

After installation, the batteries were left to charge for 2 days without any load on the inverter.

After one week of installation and usage, running a moderate load of about 150w all around, the batteries started entering low mode. sometimes, as soon as the charging sources are switched off, the battery indicators drop 2 bars out of 4 to show inky 2 bars of battery reserve left without any load.

After going back and forth and taking the batteries back to the dealer to be charged etc.., the engineer of the company told me that I need add more panels.

Today I changed the batteries to dry cells, and also got same results of battery indicator dropping to 2 bars when d sun has gone off.

Could it be that my Inverter ain't charging the battery properly or the Inverter is draining the batteries?

earthrealm:


That would be possible, on a personal arrangment.best with whoever is in your city.
Shouldnt be a big deal.
However it may be for another groupbuy, as this present one is almost concluded...almost 200cells ordered ......omo men dey here wey believe lithium dieeeeeeeeee

eliteweb:
Thanks all! I will get a battery meter to do a proper reading of the batteries and revert back.

odimbannamdi:


DC meter to provide 360-view of the vitals of your inverter system.

It comes with 200A shunt and monitors the following:

- Voltage
- Current
- Power
- Impedance
- Internal resistance
- Capacity
- SOC
- Energy
- Runtime

Price is 10k firm.

09...0-83-74--8:635

Daboomb:



- Will this work on ANY type pf battery? (AGM, LA, Lithium, LiFePo4, etc)
- Please explain what and use of the "Shunt" is. I dont understand it.
- Will it make any difference if the Current of the System is over 200A? Will the Shunt still work?

Thanks, l am developing interest in the DC Meter.

ewizard1:
Good morning.

Still taking orders for Super Li-ion Battery units.

Call/WhatsApp +234 7038616199 for enqs.

odimbannamdi:


Thanks for the interest.

Yes, it works on any kind of battery.

The shunt is the current sensor the meter uses to measure current.

I am yet to try it on a 200A system, but it will probably give an error reading, or not calculate it.

PS: I have just 2 units left

Valto:
fairly used daly 150A 8S smart lifepo4 bms with Bluetooth app. 50k
3A super Capacitor 8S lifepo4 cell balancer 15k.

Daboomb:


Pictures of the BMS and Balancer, please.

Daboomb:


Hi.
Do you do LiFe04 types?
Is that Number above, working on WhatsApp?

odimbannamdi:


60A Powmr MPPT Solar Charge Controller available
Price: 52,000 firm

60A PWM Solar Charge Controller (1 unit)
Price: 10,000 firm

Whatsapp: 09...08....3...74.86..35

dollarnaira:
Bluetooth meter for lead acid batteries.
Suitable for inverters without display.
CHECK your state of battery via your phone.

samnaija:



Does it give readings for individual batteries in a battery bank. Or the entire battery bank.
And how much.

luvlyoracle:
I can see you still searching for battery to buy.
Pls make sure you get lithium ion phosphate cells.