₦airaland Forum

To correct that EVAP, tighten your fuel tank cover till it clicks

samintegrity:
The price is depends on how much it was imported for.. the price i bought may be slightly different from yours..

To ans your question, it cost me 14k each both cost 28k

thanks

Dozieson:
Hope it worked and the aim achieved

Only one worked.

And also the aim was not achieved as the main one responsible for air fuel ratio didn't work.

Arysexy:
To correct that EVAP, tighten your fuel tank cover till it clicks

Thanks..

Will try this.

samintegrity:
Thanks everyone for the input...

I reached out to Gazza, and he gave me a hint..

I wanted to buy the 22mm O2 sensor Socket from Gazza, but he didn't have ..

So he suggested I buy the Normal 22mm socket and get a welder to cut it out..

Which I did this morning, bought the normal socket, have my welder cut it out and weld a small pipe to extend its housing..


Victory at last, both sensor removed and replaced..


However, or unfortunately, only the second one worked.

As the one I removed from the sensor 1 is different from the one sent to me..

I have reached out to luvinghubby, will feedback once I get it all sorted out..

Btw, who can help me with this two codes..

Pic 1. The sensor 1 I removed
Pic 2. What I got.

Pic 3 the codes after scan

Good morning bro. Please can you post the picture of the improvised 22mm O2 sensor, thanks.

samintegrity:
Thanks everyone for the input...

I reached out to Gazza, and he gave me a hint..

I wanted to buy the 22mm O2 sensor Socket from Gazza, but he didn't have ..

So he suggested I buy the Normal 22mm socket and get a welder to cut it out..

Which I did this morning, bought the normal socket, have my welder cut it out and weld a small pipe to extend its housing..


Victory at last, both sensor removed and replaced..


However, or unfortunately, only the second one worked.

As the one I removed from the sensor 1 is different from the one sent to me..

I have reached out to luvinghubby, will feedback once I get it all sorted out..

Btw, who can help me with this two codes..

Pic 1. The sensor 1 I removed
Pic 2. What I got.

Pic 3 the codes after scan

Did the sensor 1 later worked?
If no, where did you get the right match?

AutosAbuja:
Did the sensor 1 later worked?
If no, where did you get the right match?

I didn't get the right match bro. Sold the car, funny enough I bought another similar one and it worked on the new car.

T

samintegrity:
I didn't get the right match bro. Sold the car, funny enough I bought another similar one and it worked on the new car.

T

Wow!
The sensor would clear the code on my car for a few minutes and then return the same code p1157. Wallahi, I don tire self.

AutosAbuja:
Wow!
The sensor would clear the code on my car for a few minutes and then return the same code p1157. Wallahi, I don tire self.

The thing dey select bro...

samintegrity:
The thing dey select bro...

I don realise that jare. But I must find the right one by fire by force.
Thanks