₦airaland Forum

saintgp:
She obviously is,a construction/building engineer to be precise.

we were thought that in all engineering courses not only building. They told us to avoid sharp edges

Bluezy13:
You have a point.
But going by this point, the hole should be wider than it is in order to evenly distribute the sitting pressure to the square edges and this will make prolonged sitting a little uncomfortable.
A little research shows that the hole is to provide vacuum when stacking the chairs.
This explanation is scientifically feasible.

How wide should the hole be then?😂🤣😂🤣😃😃😄😄😄😄😂

It is the point of injection in molding the plastic from the machine. If you work in a plastic manufacturing company you will understand better.

Bvlgari:
Pls nairalanders, what is the important of this hole pls?

ChybuzzDD:
Your explanation doesn't make sny sense to any enlightened mind.

You're talking about its role in structural integrity, and you dwelled only on its shape being round or square.


How about if it were absence? How would the absence compromise the integrity and stability of the chair?? There are some without that hole and they're still stable

Moreso, how does its presence confer stability or maintain the integrity of the chair??

The overwhelming number of people who liked the post is a testament to the number of dumbheads we have in this forum.
Many must have done so because they saw the 'f' tag on your name without actually digesting the meaningless stuff you wrote there, and that's a shame

Quite unfortunate that you can't compose an opinion with backlash...
So I won't reply you on this topic...
Goodday

It is to absorb the centrifugal and centripetal force emanating from the huge backside of most women...smart design!

ChybuzzDD:
Your explanation doesn't make sny sense to any enlightened mind.

You're talking about its role in structural integrity, and you dwelled only on its shape being round or square.


How about if it were absence? How would the absence compromise the integrity and stability of the chair?? There are some without that hole and they're still stable

Moreso, how does its presence confer stability or maintain the integrity of the chair??

The overwhelming number of people who liked the post is a testament to the number of dumbheads we have in this forum.
Many must have done so because they saw the 'f' tag on your name without actually digesting the meaningless stuff you wrote there, and that's a shame

Na the likes dey pain you ni ? ...oponu! enemy of progress dey form smart..her answer is %100 correct same reason bridges are built with gaps...so you can now commit suicide in peace...

sotherefore:
Lols. You are the senseless one here. He asked harmless question and I haven't seen anywhere that such is bad. So if you think asking questions means something is wrong with that person then sorry your sense of reasoning is the size of an ameoba. Shame.

Worse of it is that, he goes by the moniker "CuriousStuden.t".
Yet he didn't know curiosity makes one to ask questions.

ChybuzzDD:
The question is not about why there's a "circular" hole on the chair.

It's about why there's a hole on the chair.

Are you telling us if there were no hole at all, weight wouldn't be equally distributed and the chair would break easily?

Which scientific law or principle justifies that?

You are embarassing your family and local goverment..mr man rest..

kalufelix:
Na the likes dey pain you ni ? ...oponu! enemy of progress dey form smart..her answer is %100 correct same reason bridges are built with gaps...so you can now commit suicide in peace...

You're an illiterate id!ot. The gaps in bridges are to allow for expansion.

So, is the hole on the chair now for expansion and no longer to distribute pressure??

Plastics don't expand, and that wasn't even what the girl was talking about.

Out of utter ignorance and lack of quality education, people like you swallow everything they hear/read.
I got A1 in Physics, Chemistry and Mathematics, and won't be misled by dumbheads like you

Puss360:
Quite unfortunate that you can't compose an opinion with backlash...
So I won't reply you on this topic...
Goodday

You won't reply because you can't defend your initial wrong deposition.

Your post was an attempt to explain why the hole is round instead of square shaped, which is quite different from why the hole is there in the first place.

ChybuzzDD:
You won't reply because you can't defend your initial wrong deposition.

Your post was an attempt to explain why the hole is round instead of square shaped, which is quite different from why the hole is there in the first place.

If u read through my post, you will see where I later stated (in response to someone else), that aside from the fact that the hole is round, it's also there for ease of stacking and unstacking... If the holes weren't there, when stacking, vacuum pressure will build up and make it difficult to unstack....
I hope u are okay....

Wow

It is bro, not for big umbrellas. And mostly its for outdoor. Some adult weight go even break am. Na Nigeria we dey use am as chair or table, some dey use am furniture for ous seff.

Bvlgari:
Yeah i thought so too but the umbrella would not be stable in the chair hole. the table hole is more better for an umbrella stand

Brings us back to my question again

It's simply for ventilation. I used to work in a product test lab and we ordered for long stools usually used in the lab.

While on a visit, our ISO consultant advised that all the stools be drilled with tiny holes to enhance aeration so as to limit discomfort while sitting on it.

There nothing structural about it.

For structural integrity I believe.

Same reasons there are holes on drainage culverts.

FitCorper:
That’s an emergency exit and in case mess just show unexpectedly so e go just deflate downwards and nor smell much.

Oponu

my own na to read comments 🤪😂

Taylor90:
Umbrella

But sometimes I use it for easy passing out of gas when belle don full

ChybuzzDD:
You're an illiterate id!ot. The gaps in bridges are to allow for expansion.

So, is the hole on the chair now for expansion and no longer to distribute pressure??

Plastics don't expand, and that wasn't even what the girl was talking about.

Out of utter ignorance and lack of quality education, people like you swallow everything they hear/read.
I got A1 in Physics, Chemistry and Mathematics, and won't be misled by dumbheads like you

Lol...see mouth like i got A1 in bla bla bla...and what causes the expansion in bridges? is it not the same pressure exerted from sitting on the stool...you are smart but "i too know" will be your undoing in life..

The hole is actually meant for the guys to pack in their balls

Puss360:
The hole is for Structural integrity of th stool when you sit... If u notice, it is always round. If it were square, pressure from your weight while sitting will begin from the "Square edges" and cause the chair to crack... But as it is round, the pressure is evenly distributed...

polymer engineering 101

ChybuzzDD:
The question is not about why there's a "circular" hole on the chair.

It's about why there's a hole on the chair.

Are you telling us if there were no hole at all, weight wouldn't be equally distributed and the chair would break easily?

Which scientific law or principle justifies that?

To my own understanding, The round hole in a plastic stool serves several important purposes:

1. Ventilation: The hole allows for better air circulation, preventing the buildup of heat and humidity. This makes sitting on the stool more comfortable, especially during hot weather.

2. Drainage: If the stool is used outdoors or in wet environments, the hole helps in draining rainwater or any liquid that might spill on the seat. This feature prevents water accumulation, which could lead to the stool becoming slippery or damaged.

3. Reduced Weight: The hole reduces the overall weight of the stool, making it easier to carry or move around.

4. Stability and Structural Integrity: The presence of the hole in the stool design is carefully engineered to maintain the stool's stability and structural integrity. Despite having a hole, the stool's design ensures it can still support the weight of the person sitting on it.

5. Aesthetic Appeal: The hole also adds an aesthetic element to the design, making the stool look more modern and visually appealing.

In summary, the round hole in a plastic stool offers improved ventilation, drainage, reduced weight, stability, and adds to the stool's overall design aesthetic.

Bvlgari:
Pls nairalanders, what is the important of this hole pls?

For easy carriage

For your mind

Puss360:
The hole is for Structural integrity of th stool when you sit... If u notice, it is always round. If it were square, pressure from your weight while sitting will begin from the "Square edges" and cause the chair to crack... But as it is round, the pressure is evenly distributed...

Puss360:
The hole is for Structural integrity of th stool when you sit... If u notice, it is always round. If it were square, pressure from your weight while sitting will begin from the "Square edges" and cause the chairs to crack... But as it is round, the pressure is evenly distributed...

Did you work in a plastic manufacturing company in order to know if what you posted is a fact?