Akerewe:


Yet it's still cheaper in bayelsa than OGUN STATE, Lagos is the source of most of these building materials except granite and sands which we have in aboundant in OGUN STATE yet it's still on the high side here. 5tons granite is #65,000-70,000 here in Ogun state presently.

We also go to Lagos to buy bulk on our own from Ogun state anytime we feel like cutting cost yet the artisan here are more costly than bayelsa artisan if am guessing right. Imagine I recently paid 50k for artisan to set 320 pieces of 9" inches blocks above lintel level which cost 2 mason 2 helpers less than 2 days to finish.

Vocals:


Your quotes and billing are way to expensive, you have been schooled.

Tons of granite ranges from 5k to 14k

And there are loads of QUARRIES( KOPEC, IJEBU ODE, RCC, AND OTHERS) in ogun State, making it more cheaper.

Akerewe:


Yet it's still cheaper in bayelsa than OGUN STATE, Lagos is the source of most of these building materials except granite and sands which we have in aboundant in OGUN STATE yet it's still on the high side here. 5tons granite is #65,000-70,000 here in Ogun state presently.

We also go to Lagos to buy bulk on our own from Ogun state anytime we feel like cutting cost yet the artisan here are more costly than bayelsa artisan if am guessing right. Imagine I recently paid 50k for artisan to set 320 pieces of 9" inches blocks above lintel level which cost 2 mason 2 helpers less than 2 days to finish.

Rany4all:
Hmmm, 50k to set just 320 blocks? Are you sure that's what obtains generally around there or yours is just an exception?

Akerewe:


Can u send me the number of the supplier who's selling 5tons of granite at 14k pls biko

As for the artisan/mason for the job done, that's the fact of what I paid.

Vocals:


Have a read on your quote I never stated that 5tons was 14k, I was only giving you price advice on the cost, as it varies depending on sizes....

Mind you I am on the journey of a factory construction in same Ogun State( very remote community) and all prices are still relatively low to what you have expended.
Visit rcc, KOPEC, cnc, crane, quarries they would give you the prices of the various sizes, in my own case I made use of 3/4down and it was 11k per ton from KOPEC.... the driver charges 40k for the transportation 20 tons size truck, and I have made purchase of about 80ton and still counting. So you can do your assignment again and this time around diligently.

Akerewe:


Hmm, 11k per tonnage? Guy gba, won ti ripped e? I can actually sell granite for u at a very reasonable price below what u r buying currently, infact compare to what ur 11k per tonnage it would a kind of unimaginable price. I will supply it with my money and if it's not up to 20tonnage u r used to, reject it.


U said very remote community, where I am in OGUN STATE is less than 40 minutes to Lagos, u can't compare remote community to a city.

Ok if my 5tons is @ d rate of 11k per tons, 5 tons would be 55k abi? How much will the truck charge? U mean the truck will charge 10k for moving it? I bought it @65k-70k.

twinskenny:
he said the truck charge 40k

twinskenny:
he said the truck charge 40k

FEGEITOK:


Do you really want to ask someone to give up his secret sauce?

In this job, there are fathers, husbands, young men, students, etc. There is no standard charge for screeding. Some charge based on the name and reputation they have built over the years. Others charge because of the enormity of responsiblity they carry. Others charge because they would rather do something legit than beg or steal. Others want to make it big before tomorrow.

Because the motivations are so different, the pricing you get will vary considerably.

If you need someone that travels anywhere and everywhere and does not charge exhorbitantly. I can recommend someone. He is an undergraduate with a drive to better his lot in life. I like his work ethic. He finds time between his classes to travel all over Nigeria to do screeding so he can self-sponsor his education.

This is assuming that you found it difficult to arrive at a compromise with Bolu.1986 whose work I love and highly recommend.

Maybe I will start with your approval by passing on these parameters so we can get his costing for the above.

Akerewe:


Hmm, 11k per tonnage? Guy gba, won ti ripped e? I can actually sell granite for u at a very reasonable price below what u r buying currently, infact compare to what ur 11k per tonnage it would a kind of unimaginable price. I will supply it with my money and if it's not up to 20tonnage u r used to, reject it.

Mind u, in my place here, no 20 tons truck will collect 40k to move 20tons of granite, I can bet that. May b quarry is very close to ur site.


U said very remote community, where I am in OGUN STATE is less than 40 minutes to Lagos, u can't compare remote community to a city.

Ok if my 5tons is @ d rate of 11k per tons, 5 tons would be 55k abi? How much will the truck charge? U mean the truck will charge 10k for moving it? I bought it @65k-70k.

michaellek:



Fegeitok, I sent you PM concerning the above.

Thanks in anticipation.

thatthickgurl:
Can anyone recommend a reliable and trustworthy contractor please?

Preferably someone with the fear of God.

RockOfAgesAlumi:

For which work?
Thanks

thatthickgurl:
Can anyone recommend a reliable and trustworthy contractor please?

Preferably someone with the fear of God.

MeineMutter:
Any serious, professional borehole person/company in the House, please?

I mean serious person/company that can carry out meaningful and effective soil test and dig quality borehole in a town very close to Osogbo in Osun State.

No rotary diggers, please. We want boring machine digger who can stay to terms of agreement 100% and who is affordable.

I may be able to get person/company one or more drilling jobs (although already on standby), if the outcome of the first job is very satisfactory.

Kindly share, here, business profile, proof of jobs handled successfully with evidences and testimonies (if there’s any).

Vocals:


Your comprehension skill ehn.....

I am 25 mins to lagos,sagamu, ibadan,abeokuta all from same location, so tell me how you can be so calculative.

By the way the size determine the price, the error up there is 3/4 down was gotten for 7k per ton,if you still don't get it. I don't know what to say.
While the larger sizes( larger than those use for fuelling station ground flooring. were gotten at 11k per ton.

thatthickgurl:
Can anyone recommend a reliable and trustworthy contractor please?

Preferably someone with the fear of God.

Ojeniyi123:




Call/WhatsApp 09032355652