₦airaland Forum

Welcome, Guest: Register • Login • With Google • Trending • Recent • New

Stats: 3,345,767 members, 8,519,364 topics. Date: Monday, 16 November 2026 at 07:40 AM

Toggle theme

The HONDA Club - Car Talk (32) - Nairaland

Nairaland Forum › Nairaland General › Car Talk › The HONDA Club (49563 Views)

1 2 3 ... 29 30 31 32 33 Reply (Go Down)

Re: The HONDA Club by StrangeAngel: 9:25am On Oct 15
MOTIONTECH:
Hi, goodmorning, have you tried to clear the code?
yes, I eventually got it cleared however it is burning fuel like a lot, I will be returning it to the dealer.
Re: The HONDA Club by StrangeAngel: 9:26am On Oct 15
Cryomancer:
The issues with this car is much.... didn't you scan it before buying the carhuh.

Anyway I don't know any specialists in ilorin, but my guess is that you bought that car from someone that also resides in ilorin, which says a lot about the codes that you have on the car.

Anyway my best advice is to bring that car to Lagos where there are lots of Honda specialists in oyingbo and dedicate a weekend to fixing all these issues because there's no way you can enjoy that car with all those codes, and the more you give the car to inexperienced mechanics in ilorin, the more complicated the car issues becomes.

This is just my personal advice.
I am returning the car, the issues with it is much more, it is burning way too much fuel for an i4
Re: The HONDA Club by StrangeAngel: 9:30am On Oct 15
Igemburg:
So I just got this Honda Accord 2014 model

Ride is smooth

The only issue I have is vibration at idle

*Engine mounts changed
*Plugs, air filter, injectors serviced
And still vibrates at idle, but when on motion it moves smoothly

Rewire told me issue is from engine, but car moves smoothly in motion
Who can recommend an expert Honda technician that can solve this
does the vibration come with the rpm needle constantly searching for a balance?
also what's the rpm on idle
do you experience this on a cold start or even when the engine is running at operating temp.
Re: The HONDA Club by Igemburg(m): 11:49pm On Oct 17
StrangeAngel:
does the vibration come with the rpm needle constantly searching for a balance?
also what's the rpm on idle
do you experience this on a cold start or even when the engine is running at operating temp.
It doesn't happen at cold start
It happens when RPM has dropped a little below one after it has maintained its balance
It becomes more intense when temperature is above 90°F
Also it consumes fuel a lot and no error code came out when scanned
Re: The HONDA Club by nurey(m): 7:35am On Oct 18
Igemburg:
It doesn't happen at cold start
It happens when RPM has dropped a little below one after it has maintained its balance
It becomes more intense when temperature is above 90°F
Also it consumes fuel a lot and no error code came out when scanned
It may be fuel delivery issues, you need to check what each injector is spraying. But they should check the plugs too first
Re: The HONDA Club by justiniyke29: 11:35am On Oct 22
i am experiencing vibration on my steering and drivers tire between 60-80kmph, once i increase speed to 100kmph it stops. This started after i changed the shaft on the drivers side, i dont know if the shaft is faulty or its something else (all my four tires looks good when i inspect them visually and still have enough thread depth)
Re: The HONDA Club by Kaymaxi2222(m): 11:35pm On Oct 22
justiniyke29:
i am experiencing vibration on my steering and drivers tire between 60-80kmph, once i increase speed to 100kmph it stops. This started after i changed the shaft on the drivers side, i dont know if the shaft is faulty or its something else (all my four tires looks good when i inspect them visually and still have enough thread depth)
na your shaft cup wey enter gear get issue having same problem too after changing my gearbox but will find time to fix mine later
Re: The HONDA Club by flootintin: 11:06am On Oct 23
I have power issue with my car. My battery rans down on motion and when I checked the alternator, it was working well. I notice that at night, my dashboard light is dim. Battery is just 3 months old. What could be the issue. Car is honda accord eagle spirit.
Re: The HONDA Club by justiniyke29: 11:33pm On Oct 23
Kaymaxi2222:
na your shaft cup wey enter gear get issue having same problem too after changing my gearbox but will find time to fix mine later
okay thanks, will have it checked out
Re: The HONDA Club by GOSPELTRUTH31: 12:03pm On Oct 24
I recently join Honda club after driving and using Toyota for 15years

bought the 2008 Honda civic

my challenges is that the fuel gauge refused to work and the yellow reserv light is blinking continuously and I have half tank of fuel in my car.

things I have changed
digital clock and complete fuel pump and housing

I'm fed up and need help

Re: The HONDA Club by Louiscars: 1:48pm On Oct 24
GOSPELTRUTH31:
I recently join Honda club after driving and using Toyota for 15years

bought the 2008 Honda civic

my challenges is that the fuel gauge refused to work and the yellow reserv light is blinking continuously and I have half tank of fuel in my car.

things I have changed
digital clock and complete fuel pump and housing

I'm fed up and need help
Most likely an electrical fault if you’re in Lagos you can reach out today to get it fixed at 08028992075
Re: The HONDA Club by GOSPELTRUTH31: 3:37pm On Oct 24
Louiscars:
Most likely an electrical fault if you’re in Lagos you can reach out today to get it fixed at 08028992075
I'm in pH
Re: The HONDA Club by Zyzman: 9:32am On Oct 28
Good Morning House,

I have always been a fan of the Honda civic, I intend to buy it as a first time car owner, I’m looking at 2013 to 2015 model, any advice on which to pick?
Re: The HONDA Club by Louiscars: 2:18pm On Oct 28
Zyzman:
Good Morning House,

I have always been a fan of the Honda civic, I intend to buy it as a first time car owner, I’m looking at 2013 to 2015 model, any advice on which to pick?
The 2013 - 2015 is an awesome choice for a first time user actually, do your due diligence before buying and also be very big on maintenance such as using the right fluids and you should have no issues with it. Run from rusted/flooded unit though if you need help getting a good unit you can always reach out also
Re: The HONDA Club by captainking(m): 3:27pm On Oct 28
GOSPELTRUTH31:
I'm in pH
where did you buy the digital clock and how much...my fuel guage side is malfunctioning...sometimes. it goes high and sometimes is normal
Re: The HONDA Club by GOSPELTRUTH31: 7:54am On Oct 29
captainking:
where did you buy the digital clock and how much...my fuel guage side is malfunctioning...sometimes. it goes high and sometimes is normal
bought it from onitsha for 50k
lagos people dey mention 100k
Re: The HONDA Club by captainking(m): 1:55pm On Oct 29
GOSPELTRUTH31:
bought it from onitsha for 50k
lagos people dey mention 100k
Please can i have your plug so i can buy it also??
Will be in osha next week
Re: The HONDA Club by chillex8(m): 3:53pm On Oct 29
GOSPELTRUTH31:
I recently join Honda club after driving and using Toyota for 15years

bought the 2008 Honda civic

my challenges is that the fuel gauge refused to work and the yellow reserv light is blinking continuously and I have half tank of fuel in my car.

things I have changed
digital clock and complete fuel pump and housing

I'm fed up and need help
Your instrument cluster is OK.

If your fuel SENDING unit is good, do this:

- Dismantle it from the fuel assembly.
- Re mount it back.
- Connect the wire feed and turn the ignition on.
- Manually move the lever and see if the fuel level on the instrument cluster moves accordingly.
- If it does, turn ignition off,connect fuel pump wire, fit other connections and your issue is solved.
Re: The HONDA Club by GOSPELTRUTH31: 7:51pm On Oct 31
chillex8:
Your instrument cluster is OK.

If your fuel SENDING unit is good, do this:

- Dismantle it from the fuel assembly.
- Re mount it back.
- Connect the wire feed and turn the ignition on.
- Manually move the lever and see if the fuel level on the instrument cluster moves accordingly.
- If it does, turn ignition off,connect fuel pump wire, fit other connections and your issue is solved.

done this procedure yet it didn't move
Re: The HONDA Club by GOSPELTRUTH31: 7:52pm On Oct 31
chillex8:
Your instrument cluster is OK.

If your fuel SENDING unit is good, do this:

- Dismantle it from the fuel assembly.
- Re mount it back.
- Connect the wire feed and turn the ignition on.
- Manually move the lever and see if the fuel level on the instrument cluster moves accordingly.
- If it does, turn ignition off,connect fuel pump wire, fit other connections and your issue is solved.
done that already yet it didn't move
bought another gauge yet same issues
brought in ECU and changed the BCM
yet same issues
Re: The HONDA Club by GOSPELTRUTH31: 7:54pm On Oct 31
captainking:
Please can i have your plug so i can buy it also??
Will be in osha next week

Re: The HONDA Club by chillex8(m): 8:24pm On Oct 31
GOSPELTRUTH31:
done that already yet it didn't move
bought another gauge yet same issues
brought in ECU and changed the BCM
yet same issues
Your issue is very simple to solve if you are electrically savy.
There's a bridge/short circuit in the fuel sending circuit.
Check for continuity with a multimeter.

Or try this (With key ignition II, join both wires to fuel sending unit. Gauge should stop blinking and move. If it doesn't, there a break in the circuit)

You'll need to trace the wiring from the fuel sending unit through to the under dash fuse-10 and or under hood fuse-23

ECU doesn't regulate fuel gauge.
Re: The HONDA Club by GOSPELTRUTH31: 9:20pm On Oct 31
chillex8:
Your issue is very simple to solve if you are electrically savy.
There's a bridge/short circuit in the fuel sending circuit.
Check for continuity with a multimeter.

Or try this (With key ignition II, join both wires to fuel sending unit. Gauge should stop blinking and move. If it doesn't, there a break in the circuit)

You'll need to trace the wiring from the fuel sending unit through to the under dash fuse-10 and or under hood fuse-23

ECU doesn't regulate fuel gauge.
maybe this guys here are novice to civic
will surely take it to mbuka obosi in onitsha next week
Re: The HONDA Club by GOSPELTRUTH31: 9:21pm On Oct 31
pls do you reside in rivers state
chillex8:
Your issue is very simple to solve if you are electrically savy.
There's a bridge/short circuit in the fuel sending circuit.
Check for continuity with a multimeter.

Or try this (With key ignition II, join both wires to fuel sending unit. Gauge should stop blinking and move. If it doesn't, there a break in the circuit)

You'll need to trace the wiring from the fuel sending unit through to the under dash fuse-10 and or under hood fuse-23

ECU doesn't regulate fuel gauge.
Re: The HONDA Club by chillex8(m): 9:30pm On Oct 31
GOSPELTRUTH31:
pls do you reside in rivers state
Oh no. I'm in Lagos.
Re: The HONDA Club by captainking(m): 2:05pm On Nov 01
[quote author=GOSPELTRUTH31 post=141062410][/quote]Thanks bro..I appreciate
Re: The HONDA Club by gaintru: 1:31pm On Nov 02
Greetings.
I am driving acura 2007 MDX for 6 years now but I regularly work on any issues I noticed before it escalates but now I am hooked because my mechanic and rewire is not getting it right again and I lost[ confidence in them now.

The issues I am facing now is..

If I start my car in the morning the windows will refuse to wind down and the small dash board cam where informations are displayed will refuse to display

My AC will be cooling very well but at a long distance it will stop working as if the gas is reducing

If I want to reverse it will reverse back perfectly but once you return to forward it would seems as if it jerked by making a noise as if it was forced to move front.

My fuel consumption increased significantly after working and changing different things from the car by this my rewire and mechanic.

Please I need a good advice and professional mechanic contact that is very good with Acura MDX.

Thank you bosses
Re: The HONDA Club by RyanAutomotive: 1:58pm On Nov 02
gaintru:
Greetings.
I am driving acura 2007 MDX for 6 years now but I regularly work on any issues I noticed before it escalates but now I am hooked because my mechanic and rewire is not getting it right again and I lost[ confidence in them now.

The issues I am facing now is..

If I start my car in the morning the windows will refuse to wind down and the small dash board cam where informations are displayed will refuse to display

My AC will be cooling very well but at a long distance it will stop working as if the gas is reducing

If I want to reverse it will reverse back perfectly but once you return to forward it would seems as if it jerked by making a noise as if it was forced to move front.

My fuel consumption increased significantly after working and changing different things from the car by this my rewire and mechanic.

Please I need a good advice and professional mechanic contact that is very good with Acura MDX.

Thank you bosses
Good afternoon sir,

Thank you for taking the time to explain the issues with your 2007 Acura MDX. We also understand your frustration, especially after maintaining the vehicle for six years and having different components worked on without a lasting solution.

From the symptoms described, we would advise against further random part replacement. There may be more than one fault, but some of the electrical symptoms could potentially share a common cause.

1. Windows Not Working and Dashboard Information Display Not Coming On During Morning Start

This needs a proper electrical diagnosis.

Possible areas to investigate include:

* Weak battery or unstable voltage during cold starts.
* Battery terminals, engine grounds and body ground connections.
* Ignition switch and associated power supply circuits.
* Main fuses, relays and fuse-box connections.
* Power supply or communication issues affecting the instrument display and power windows.
* Possible wiring faults or poor connections from previous electrical repairs.

The first step should be to carry out a battery and charging-system test, followed by voltage-drop and circuit checks. We should also scan the relevant vehicle modules for communication and power-supply faults.

2. AC Cools Initially but Stops Cooling After a Long Drive

This does not automatically mean the refrigerant gas is reducing.

Possible causes include:

* AC compressor or compressor clutch-related faults.
* Condenser cooling fan problems.
* Evaporator icing due to airflow or temperature-control issues.
* Expansion valve or refrigerant-flow restrictions.
* Incorrect refrigerant charge.
* Pressure sensor or AC control-system issues.

The AC system should be tested while it is working and again when the cooling stops. High- and low-side pressure readings, compressor operation, condenser fan performance and evaporator temperature should be monitored.

Important: Do not keep topping up refrigerant without identifying the actual cause.

3. Reverse Engages Normally but the Vehicle Jerks or Makes Noise When Shifting Back to Drive

This symptom deserves particular attention.

Possible causes include:

* Worn or damaged engine/transmission mounts.
* Excessive drivetrain movement.
* Delayed transmission engagement or hydraulic pressure issues.
* Transmission fluid level or condition problems.
* Internal transmission or valve-body-related faults.
* Excessive play in a drivetrain component.

A technician should inspect the mounts and drivetrain, check the transmission fluid using the correct procedure, scan the transmission control system and assess the engagement behaviour.

We should not conclude that the gearbox is faulty until these checks have been completed.

4. Significant Increase in Fuel Consumption

Since you mentioned that fuel consumption increased after several repairs and component replacements, we would want to review the previous work rather than immediately recommend changing more parts.

Possible areas include:

* Oxygen/Air-Fuel Ratio sensors.
* Mass Air Flow (MAF) sensor and intake system.
* Engine coolant temperature sensor or thermostat.
* Fuel pressure and injector performance.
* Ignition coils and spark plugs.
* Vacuum leaks.
* Incorrect sensor readings or wiring connections.
* Transmission-related problems that may affect engine load and efficiency.

A proper diagnostic scan should include live data, fuel trims, sensor readings and relevant engine/transmission fault codes.



OUR PROFESSIONAL RECOMMENDATION

Our advice is to have the vehicle undergo a comprehensive electrical, engine, AC and transmission assessment before any additional components are replaced.

At Ryan Automotive Limited, our approach is to identify the root cause of each complaint, document our findings and explain the recommended repairs before carrying out any work.

No diagnosis, no unnecessary parts replacement.

RYAN AUTOMOTIVE LIMITED

We specialise in computerized vehicle diagnostics, auto electrical troubleshooting, engine and transmission diagnosis, AC diagnosis and mechanical repairs.

Along LASU–Isheri Road, Lagos.



Kindly help us with a few additional details:

1. Is your 2007 Acura MDX the 3.7L V6 model?
2. When the windows and dashboard display fail in the morning, do they start working after the engine has been running for some time, or do you have to switch the ignition off and restart?
3. When the AC stops cooling, does it start cooling again after you switch it off for a while?
4. When shifting from Reverse to Drive, is the jerk accompanied by a loud clunk, vibration or noticeable delay before the vehicle moves?
5. Do you currently have any Check Engine, VSA, ABS or other warning lights on the dashboard?

These details will help us narrow down the possible causes before proceeding with physical inspection.

RYAN AUTOMOTIVE LIMITED
Precision • Transparency • Excellence.
Re: The HONDA Club by GOSPELTRUTH31: 5:17pm On Nov 06
RyanAutomotive:
Good afternoon sir,

Thank you for taking the time to explain the issues with your 2007 Acura MDX. We also understand your frustration, especially after maintaining the vehicle for six years and having different components worked on without a lasting solution.

From the symptoms described, we would advise against further random part replacement. There may be more than one fault, but some of the electrical symptoms could potentially share a common cause.

1. Windows Not Working and Dashboard Information Display Not Coming On During Morning Start

This needs a proper electrical diagnosis.

Possible areas to investigate include:

* Weak battery or unstable voltage during cold starts.
* Battery terminals, engine grounds and body ground connections.
* Ignition switch and associated power supply circuits.
* Main fuses, relays and fuse-box connections.
* Power supply or communication issues affecting the instrument display and power windows.
* Possible wiring faults or poor connections from previous electrical repairs.

The first step should be to carry out a battery and charging-system test, followed by voltage-drop and circuit checks. We should also scan the relevant vehicle modules for communication and power-supply faults.

2. AC Cools Initially but Stops Cooling After a Long Drive

This does not automatically mean the refrigerant gas is reducing.

Possible causes include:

* AC compressor or compressor clutch-related faults.
* Condenser cooling fan problems.
* Evaporator icing due to airflow or temperature-control issues.
* Expansion valve or refrigerant-flow restrictions.
* Incorrect refrigerant charge.
* Pressure sensor or AC control-system issues.

The AC system should be tested while it is working and again when the cooling stops. High- and low-side pressure readings, compressor operation, condenser fan performance and evaporator temperature should be monitored.

Important: Do not keep topping up refrigerant without identifying the actual cause.

3. Reverse Engages Normally but the Vehicle Jerks or Makes Noise When Shifting Back to Drive

This symptom deserves particular attention.

Possible causes include:

* Worn or damaged engine/transmission mounts.
* Excessive drivetrain movement.
* Delayed transmission engagement or hydraulic pressure issues.
* Transmission fluid level or condition problems.
* Internal transmission or valve-body-related faults.
* Excessive play in a drivetrain component.

A technician should inspect the mounts and drivetrain, check the transmission fluid using the correct procedure, scan the transmission control system and assess the engagement behaviour.

We should not conclude that the gearbox is faulty until these checks have been completed.

4. Significant Increase in Fuel Consumption

Since you mentioned that fuel consumption increased after several repairs and component replacements, we would want to review the previous work rather than immediately recommend changing more parts.

Possible areas include:

* Oxygen/Air-Fuel Ratio sensors.
* Mass Air Flow (MAF) sensor and intake system.
* Engine coolant temperature sensor or thermostat.
* Fuel pressure and injector performance.
* Ignition coils and spark plugs.
* Vacuum leaks.
* Incorrect sensor readings or wiring connections.
* Transmission-related problems that may affect engine load and efficiency.

A proper diagnostic scan should include live data, fuel trims, sensor readings and relevant engine/transmission fault codes.



OUR PROFESSIONAL RECOMMENDATION

Our advice is to have the vehicle undergo a comprehensive electrical, engine, AC and transmission assessment before any additional components are replaced.

At Ryan Automotive Limited, our approach is to identify the root cause of each complaint, document our findings and explain the recommended repairs before carrying out any work.

No diagnosis, no unnecessary parts replacement.

RYAN AUTOMOTIVE LIMITED

We specialise in computerized vehicle diagnostics, auto electrical troubleshooting, engine and transmission diagnosis, AC diagnosis and mechanical repairs.

Along LASU–Isheri Road, Lagos.



Kindly help us with a few additional details:

1. Is your 2007 Acura MDX the 3.7L V6 model?
2. When the windows and dashboard display fail in the morning, do they start working after the engine has been running for some time, or do you have to switch the ignition off and restart?
3. When the AC stops cooling, does it start cooling again after you switch it off for a while?
4. When shifting from Reverse to Drive, is the jerk accompanied by a loud clunk, vibration or noticeable delay before the vehicle moves?
5. Do you currently have any Check Engine, VSA, ABS or other warning lights on the dashboard?

These details will help us narrow down the possible causes before proceeding with physical inspection.

RYAN AUTOMOTIVE LIMITED
Precision • Transparency • Excellence.
boss my ECT sensor 2 is not working and my car consume fuel Honda civic 2008
after scanning it point to it and when the electrician saw it he said as long as thermostat is not in my car that I should not worry about fixing the ECT sensor 2.

me I want to buy the sensor and fix it hope it will start reading and working even if the thermostat is not in my car?
Re: The HONDA Club by captainking(m): 5:33pm On Nov 06
GOSPELTRUTH31:
boss my ECT sensor 2 is not working and my car consume fuel Honda civic 2008
after scanning it point to it and when the electrician saw it he said as long as thermostat is not in my car that I should not worry about fixing the ECT sensor 2.

me I want to buy the sensor and fix it hope it will start reading and working even if the thermostat is not in my car?
you have to instal back the thermostat ...then change the sensor..did it for mine in ph
Re: The HONDA Club by RyanAutomotive: 6:36pm On Nov 06
GOSPELTRUTH31:
boss my ECT sensor 2 is not working and my car consume fuel Honda civic 2008
after scanning it point to it and when the electrician saw it he said as long as thermostat is not in my car that I should not worry about fixing the ECT sensor 2.

me I want to buy the sensor and fix it hope it will start reading and working even if the thermostat is not in my car?
Good evening sir.

Vehicle Details

Make: Honda
Model: Civic
Year: 2008

Main Complaint:

* ECT Sensor 2 reported as faulty during computerized diagnosis.
* Increased fuel consumption.
* Thermostat has reportedly been removed from the cooling system.

Sir, before you purchase and replace the ECT Sensor 2, there is something important you need to understand.

Your electrician’s advice that you should not worry about the sensor simply because the thermostat is missing is not entirely correct.

The ECT sensor and thermostat perform different functions within the engine cooling system. The fact that the thermostat is absent does not automatically mean the ECT sensor is unnecessary or that it should not be repaired.

Let’s break it down.


1. What Does the ECT Sensor Do?

ECT means Engine Coolant Temperature.

The sensor monitors the temperature of the engine coolant and sends temperature information to the engine control module (ECM).

The computer uses this information for several functions, including:

* Fuel injection adjustment.
* Engine warm-up management.
* Cooling fan operation.
* Ignition and engine performance adjustments.
* Temperature-related warning and protection strategies.

If the sensor or its circuit is faulty, the computer may receive an incorrect temperature reading or no reliable reading at all.

Depending on the fault and vehicle configuration, this can affect fuel consumption and engine performance.


2. What Is the Function of the Thermostat?

The thermostat regulates the circulation of coolant between the engine and radiator.

When the engine is cold, it remains closed to help the engine reach its normal operating temperature.

As the engine warms up, it opens to allow coolant to circulate through the radiator for temperature regulation.

If the thermostat is removed, the engine may take longer to reach its intended operating temperature or operate below its designed temperature under certain conditions.

This can affect fuel economy and engine-management operation.

Important: Replacing the ECT sensor alone will not correct a cooling-system problem caused by a missing thermostat.



3, Can You Replace ECT Sensor 2 Without Installing the Thermostat?

Yes, you can physically install a functioning ECT sensor even if the thermostat is missing, provided it is the correct sensor and the installation is compatible with the vehicle.

However, there is an important distinction:

The sensor can function without the thermostat, but the cooling system will still not be operating as designed.

The sensor measures coolant temperature; the thermostat regulates coolant flow.

Therefore, installing the sensor does not eliminate the need to restore the correct thermostat.

Also, if the fault is caused by damaged wiring, a poor connector, an open circuit or another electrical problem, replacing the sensor alone may not resolve the fault.


4, What Should Be Checked Before Buying the Sensor?

I would recommend the following:

1. Confirm the Exact Fault Code

Do not rely only on the scanner description saying ECT Sensor 2 is not working. We need the actual diagnostic trouble code.

2. Check Live Temperature Data

Compare the ECT sensor readings with the actual engine temperature, especially when the engine is cold and as it warms up.

3. Inspect the Sensor Connector and Wiring

Check for damaged wires, corrosion, loose connections and poor electrical contact.

4. Test the Sensor

Verify whether the sensor is producing the correct resistance or signal according to the manufacturer’s specifications.

5. Restore the Correct Thermostat

Confirm the correct thermostat specification for the engine and install it if it has been removed.

6. Clear the Fault Codes and Recheck

After the necessary repairs, clear the codes and monitor the temperature readings to confirm that the system is functioning correctly.


5. Do NOT Do This

* Do not assume the ECT sensor is useless because the thermostat is missing.
* Do not purchase a replacement sensor without confirming whether the sensor itself is faulty.
* Do not continue operating the vehicle indefinitely without the correct thermostat.
* Do not assume that replacing the ECT sensor alone will automatically solve the high fuel consumption.
* Do not ignore the cooling system, because incorrect temperature regulation can affect engine performance and long-term reliability.


6. Professional Insight

My recommendation is to address both issues rather than treating them as alternatives.

If ECT Sensor 2 or its circuit is genuinely faulty, it should be diagnosed and repaired. The correct thermostat should also be restored to the cooling system.

However, we need to establish the exact fault code and understand which temperature sensor the scanner is identifying.

Some Honda Civic engine configurations use different coolant temperature sensor arrangements, so we should not assume the sensor location or function without confirming the engine specification.

The goal is to restore the entire engine temperature-management system, not just make the scanner stop displaying a fault code.


7. Ryan Automotive Limited Recommendation

At Ryan Automotive Limited, we recommend a proper engine cooling-system and fuel-management assessment.

Our assessment can include:

• Computerized engine diagnostics.
• ECT sensor and circuit testing.
• Live engine temperature analysis.
• Thermostat and cooling-system inspection.
• Cooling fan operation assessment.
• Fuel trim and engine performance analysis.
• Identification of the actual cause before recommending replacement parts.


RYAN AUTOMOTIVE LIMITED
Precision • Transparency • Excellence.
Re: The HONDA Club by GOSPELTRUTH31: 8:16pm On Nov 06
RyanAutomotive:
Good evening sir.

Vehicle Details

Make: Honda
Model: Civic
Year: 2008

Main Complaint:

* ECT Sensor 2 reported as faulty during computerized diagnosis.
* Increased fuel consumption.
* Thermostat has reportedly been removed from the cooling system.

Sir, before you purchase and replace the ECT Sensor 2, there is something important you need to understand.

Your electrician’s advice that you should not worry about the sensor simply because the thermostat is missing is not entirely correct.

The ECT sensor and thermostat perform different functions within the engine cooling system. The fact that the thermostat is absent does not automatically mean the ECT sensor is unnecessary or that it should not be repaired.

Let’s break it down.


1. What Does the ECT Sensor Do?

ECT means Engine Coolant Temperature.

The sensor monitors the temperature of the engine coolant and sends temperature information to the engine control module (ECM).

The computer uses this information for several functions, including:

* Fuel injection adjustment.
* Engine warm-up management.
* Cooling fan operation.
* Ignition and engine performance adjustments.
* Temperature-related warning and protection strategies.

If the sensor or its circuit is faulty, the computer may receive an incorrect temperature reading or no reliable reading at all.

Depending on the fault and vehicle configuration, this can affect fuel consumption and engine performance.


2. What Is the Function of the Thermostat?

The thermostat regulates the circulation of coolant between the engine and radiator.

When the engine is cold, it remains closed to help the engine reach its normal operating temperature.

As the engine warms up, it opens to allow coolant to circulate through the radiator for temperature regulation.

If the thermostat is removed, the engine may take longer to reach its intended operating temperature or operate below its designed temperature under certain conditions.

This can affect fuel economy and engine-management operation.

Important: Replacing the ECT sensor alone will not correct a cooling-system problem caused by a missing thermostat.



3, Can You Replace ECT Sensor 2 Without Installing the Thermostat?

Yes, you can physically install a functioning ECT sensor even if the thermostat is missing, provided it is the correct sensor and the installation is compatible with the vehicle.

However, there is an important distinction:

The sensor can function without the thermostat, but the cooling system will still not be operating as designed.

The sensor measures coolant temperature; the thermostat regulates coolant flow.

Therefore, installing the sensor does not eliminate the need to restore the correct thermostat.

Also, if the fault is caused by damaged wiring, a poor connector, an open circuit or another electrical problem, replacing the sensor alone may not resolve the fault.


4, What Should Be Checked Before Buying the Sensor?

I would recommend the following:

1. Confirm the Exact Fault Code

Do not rely only on the scanner description saying ECT Sensor 2 is not working. We need the actual diagnostic trouble code.

2. Check Live Temperature Data

Compare the ECT sensor readings with the actual engine temperature, especially when the engine is cold and as it warms up.

3. Inspect the Sensor Connector and Wiring

Check for damaged wires, corrosion, loose connections and poor electrical contact.

4. Test the Sensor

Verify whether the sensor is producing the correct resistance or signal according to the manufacturer’s specifications.

5. Restore the Correct Thermostat

Confirm the correct thermostat specification for the engine and install it if it has been removed.

6. Clear the Fault Codes and Recheck

After the necessary repairs, clear the codes and monitor the temperature readings to confirm that the system is functioning correctly.


5. Do NOT Do This

* Do not assume the ECT sensor is useless because the thermostat is missing.
* Do not purchase a replacement sensor without confirming whether the sensor itself is faulty.
* Do not continue operating the vehicle indefinitely without the correct thermostat.
* Do not assume that replacing the ECT sensor alone will automatically solve the high fuel consumption.
* Do not ignore the cooling system, because incorrect temperature regulation can affect engine performance and long-term reliability.


6. Professional Insight

My recommendation is to address both issues rather than treating them as alternatives.

If ECT Sensor 2 or its circuit is genuinely faulty, it should be diagnosed and repaired. The correct thermostat should also be restored to the cooling system.

However, we need to establish the exact fault code and understand which temperature sensor the scanner is identifying.

Some Honda Civic engine configurations use different coolant temperature sensor arrangements, so we should not assume the sensor location or function without confirming the engine specification.

The goal is to restore the entire engine temperature-management system, not just make the scanner stop displaying a fault code.


7. Ryan Automotive Limited Recommendation

At Ryan Automotive Limited, we recommend a proper engine cooling-system and fuel-management assessment.

Our assessment can include:

• Computerized engine diagnostics.
• ECT sensor and circuit testing.
• Live engine temperature analysis.
• Thermostat and cooling-system inspection.
• Cooling fan operation assessment.
• Fuel trim and engine performance analysis.
• Identification of the actual cause before recommending replacement parts.


RYAN AUTOMOTIVE LIMITED
Precision • Transparency • Excellence.
thank You for the time and energy you use to expein this wealthy information
I know the electrician was a pussy.

since I bought this car the fuel consumption is far more than my 3mz siena and after scanning and see this code pop up I knew something was wrong and the solution is to fix it

I will find another electrician and let him fix it for me

and the code is P2185
1 2 3 ... 29 30 31 32 33 Reply

The Honda Baby Boy I Saw Yesterday. I Was Amazed. • I Would Like To See Opinions About The Honda Civic 2008 Model • The Honda Place Abuja Bills Man N15million To Fix A N4million Honda Civic Coupe • 2 • 3 • 4

Picture Of Bugatti Veyron In Abuja. • Why Nigerians Are Not Buying Innoson Cars • Graphic Pics: Passengers In Danfo Bus Badly Burnt After Fuel Stored Exploded