₦airaland Forum

Please anyone knows how to ajust print margin on corel x3. I made some designs, id cards to be prescise on landscape (5 on a page) but when i try printing it cuts the end of one side. Leaving the 5th card almost half.. I have tried everything i could to no avail.. And i dont want to make 4 on a page. Someone said its the printer... I use a hp deskjet 1045 printer..
Help would be greatly appreciated

any help?

J0nyb0y:
any help?

Adust print margin? Just like its done in MS-Word?
I'm not too sure if that can be done in coredraw. But then anything is possibe. Again, did you try reducing the ID cards?

Anyways,
My questions are:
* what page size are you using for this project?
* what are the sizes of the id cards?
* while printing, what paper size did you select?

I'm sure my babas dem may have their own questions/suggestions
cc: spywareczar, felixchip, erad

lightheart:
Adust print margin? Just like its done in MS-Word?
I'm not too sure if that can be done in coredraw. But then anything is possibe. Again, did you try reducing the ID cards?

Anyways,
My questions are:
* what page size are you using for this project?
* what are the sizes of the id cards?
* while printing, what paper size did you select?

I'm sure my babas dem may have their own questions/suggestions
cc: spywareczar, felixchip, erad

thanks,
Yes, as it is done in ms-word
i dont wana reduce the idcards as this would reduce the quality
am on landscape and printing on an a4 sheet

J0nyb0y:
thanks,
Yes, as it is done in ms-word
i dont wana reduce the idcards as this would reduce the quality
am on landscape and printing on an a4 sheet

Well, I am not sure you can increase the margin. If you are so sure your:
Size on document (A4; 210mmx297mm) = selected size on printer (A4)
Then the cutting off might just be a printer fault.
Else, I'll suggest you copy it on device, take it to that business centre down your street and ask the operator to confirm if you are in order. If u stil decide to dash am 5H, na him be say u don bless person

J0nyb0y:
thanks,
Yes, as it is done in ms-word
i dont wana reduce the idcards as this would reduce the quality
am on landscape and printing on an a4 sheet

See this:
https://www.youtube.com/watch?v=rSBUsoQKFRw&fulldescription=1&gl=US&hl=en&client=mv-google

And: http://www.t-shirtforums.com/graphics-design-help/t78068.html

felixchip:
See this:
https://www.youtube.com/watch?v=rSBUsoQKFRw&fulldescription=1&gl=US&hl=en&client=mv-google

And: http://www.t-shirtforums.com/graphics-design-help/t78068.html

thanks, information was helpful

lightheart:
Well, I am not sure you can increase the margin. If you are so sure your:
Size on document (A4; 210mmx297mm) = selected size on printer (A4)
Then the cutting off might just be a printer fault.
Else, I'll suggest you copy it on device, take it to that business centre down your street and ask the operator to confirm if you are in order. If u stil decide to dash am 5H, na him be say u don bless person

thanks boss, i confirmed its the printer. I used an hp photomart and it came out fine... I guess the latter was not meant for pictures, document only

J0nyb0y:
thanks, information was helpful

You're welcome.

J0nyb0y:
thanks boss, i confirmed its the printer. I used an hp photomart and it came out fine... I guess the latter was not meant for pictures, document only

Super!
Oya go and use a wrong printer no more.