Am at ikorodu, Lagos and island sounds ok. Davo and malix please any how u guys which to help me, am on ground. Need to fix this decoder asap.

bbally:
Am at ikorodu, Lagos and island sounds ok. Davo and malix please any how u guys which to help me, am on ground. Need to fix this decoder asap.

send a mail to Malix. it wouldn't cost you much to fix, apart from transport

Thks davo.
Malix, I wil give u a call.

davodyguy:
Let Malix handle it for you

Or alternatively, my Radionic is on the Island. which ever pays you.

Island or Alaba Mkt

untie d two cables tied togeda I.e d USB cable n d front panel cable.

davodyguy:
send a mail to Malix. it wouldn't cost you much to fix, apart from transport

untie d two cables tied togeda I.e d USB cable n d front panel cable.

Advans:


untie d two cables tied togeda I.e d USB cable n d front panel cable.

hmm?

if u still havin issues wit ur qsat, send me a mail on: malixshaka@gmail.com

My own pb is dat NY stuff works well all channels but sometimes it just goes off and after trying to reboot it gets stuck at load. But I remove d sim it powers and boot normally. But with sim mtn I can't get past d load o. D front panel of the qsat it does not even get to show me d qsat logo. Am using 23g any solutions pls?

sheriffman:
My own pb is dat NY stuff works well all channels but sometimes it just goes off and after trying to reboot it gets stuck at load. But I remove d sim it powers and boot normally. But with sim mtn I can't get past d load o. D front panel of the qsat it does not even get to show me d qsat logo. Am using 23g any solutions pls?

switch to modem if you have one or change the sim. u can, also turn the device off for a while. remove the power as well. Hope this helps.

1. ss7Ni : 11747 ( H )027500 (Or 27505)
2. S5N : 11747 ( V ) 27500 (OR 27512)
3. SNW : 11747 (H )27500
4. SS5Ni : 12207 ( H ) 27492
5. SS3Ni : 12207 ( H ) 27492

do a manual scan to receive these channels if you don't have them.

sirjake:
1. ss7Ni : 11747 ( H )027500 (Or 27505)
2. S5N : 11747 ( V ) 27500 (OR 27512)
3. SNW : 11747 (H )27500
4. SS5Ni : 12207 ( H ) 27492
5. SS3Ni : 12207 ( H ) 27492
do a manual scan to receive these channels if you don't have them.

I dont think SNW still exists or work, it was replaced by Jango

**3 and 5 not showing nawa oooo.

XVIER:
**3 and 5 not showing nawa oooo.

sure

astanco:
I dont think SNW still exists or work, it was replaced by Jango

sure

sirjake:
sure

meaning?

.

All accts available now, contact me if u need

Malix:
All accts available now, contact me if u need

How far our gist?

astanco:
meaning?

meaning YES snw is no more available!

sirjake:
1. ss7Ni : 11747 ( H )027500 (Or 27505)
2. S5N : 11747 ( V ) 27500 (OR 27512)
3. SNW : 11747 (H )27500
4. SS5Ni : 12207 ( H ) 27492
5. SS3Ni : 12207 ( H ) 27492

do a manual scan to receive these channels if you don't have them.

hello sir, please how do i do the manual scan? a brief step will help, thankx

sirjake:
1. ss7Ni : 11747 ( H )027500 (Or 27505)
2. S5N : 11747 ( V ) 27500 (OR 27512)
3. SNW : 11747 (H )27500
4. SS5Ni : 12207 ( H ) 27492
5. SS3Ni : 12207 ( H ) 27492

do a manual scan to receive these channels if you don't have them.

davodoguy will soon descend on you. lol

Trueigbo:


davodoguy will soon descend on you. lol

is he God or what? I beg, na joke I dey joke!

ebrahym:


hello sir, please how do i do the manual scan? a brief step will help, thankx

Press menu -ok- type the password (0000 is the default password)-select Transponder list -OK -press the red button to add new tp. to enter a new Frequency, press the forward button on your remote control and enter the figures as required. Do the same for symbol rate, press OK when you are done. press OK to select the new frequency, then press the blue button to scan. experience is the best tutor!

sirjake:
switch to modem if you have one or change the sim. u can, also turn the device off for a while. remove the power as well. Hope this helps.

On switching to modem. I get no dingle found error message. But after say a while it comes up

sheriffman:

On switching to modem. I get no dingle found error message. But after say a while it comes up

after switching to modem, reboot your system.

Please house,
I had all my channels intact on my strong 4669XII decoder until i by myself find trouble go do bllindscan on the existing channels. After scanning, i noticed all the channels, old and new ones are displaying scramble channels despite having enough mb on sim.. except for the multi tv s
Please,,all the gurus how do i restore my stations back ASAP please

Azsky G1+ n G1super,A+ dongle, 1yr ssat account for ur qsat, besthd decoder, tvone acct are available now.
contact me on malixshaka@gmail.com

hello house I appreciate all the wonderful works u guys have been doing, by alleviating the burdens of pay TV. thumbs up. my special tanxs goes to malix who has shown a great degree of maturity and had taken time to assist us by giving us information that has really increased my knowledge on dongles.
the little contribution I have is that, if you want to be free from all complains forget about avertacam account. it is crystal clear that the days of avertacam are over. get a tv1 ccam account at highly reduced rate from a credible dealer. for those that already have cccam account and you notice that someone might be sharing your account with you don't panic there is a solution. you can reach me via email davopapa4real@gmail.com or 08030921058.

davokam:
hello house I appreciate all the wonderful works u guys have been doing, by alleviating the burdens of pay TV. thumbs up. my special tanxs goes to malix who has shown a great degree of maturity and had taken time to assist us by giving us information that has really increased my knowledge on dongles.
the little contribution I have is that, if you want to be free from all complains forget about avertacam account. it is crystal clear that the days of avertacam are over. get a tv1 ccam account at highly reduced rate from a credible dealer. for those that already have cccam account and you notice that someone might be sharing your account with you don't panic there is a solution. you can reach me via email davopapa4real@gmail.com or 08030921058.

Chairman. Good evening sir.

You just joined Nairaland. I guess you have been an observer for a while, for you to have so 'much' information about this thread

But this one wey we have to contact you, hmmmm I dey fear ooo

Please I need d Name and Model of d Wi-Fi dongle I can use with my Qsat 23g. I observed that d back USB port don't work $ I cant use my Huawei modem but can use a Zte modem @ d front USB.

Queen is in coma again. Can anyone confirm?

Pls Qsat is not working for meagain o since yesterday connected to server on gprs and 3g via modem but no show.Now if I buy any of this accounts say TV1 will all this be over?How frequent does it freeze and whats the best account I can buy now.Am using 23g