Strongbest:
Sometimes when you want to give up, some people just get you inspired and willing to carry on.

If you have been here and yet to have a product of your own or still buy these products with your money, it's heart breaking especially, those that bought my ebooks.

Don't just learn, put into practice what you are learning. It's easy and economical. Just to encourage us though.



Thanks.

God bless u richly Oga strong best

realadesco:
av send u mail boss. @adesco. Thanks

Email replied Sir.


Thanks.

Shininstar30:

God bless u richly Oga strong best

Amen ma'am!

Thanks.

Strongbest:


Email replied Sir.

Thanks.

thanks boss

Strongbest:


Email replied Sir.

Thanks.

thanks boss

TABLE OF CONTENT



Hello, if you are just joining us, on this thread for the first time, kindly use the table of content below to help you navigate through our previous lessons.







DO CHECK Page 0.................Liquid detergent







Page 1 and 4............... Germicide







Page 2....................... Antiseptic







Page 4-5............................. Balm







Page 6,15 and 16............ Images of products







Page 7................... Condensed Milk







Page 10-11............ Scouring Powder







Page 12-13................. Toothpaste formulas







Page 15,16................ Bar Soap







Page 29............................... Soft drink (chapman)







Page 37-38.............. Production of Shea Butter Body Cream







Page 38.................About "Our" E-book







Page 40-42.................Laundry Bar Soap (repeated)











Thanks.

In order to avoid the frequent questions on what my ebooks contain, I have here by typed out the contents of the two ebooks(the old and new) as below:





Content of the old one:



1.Youghurt drink

2. Custard powder

3. Medicated soap/non medicated

4. Body cream

5. Candle

6. Liquid soap

7. Hair shampoo

8. Liquid toilet wash (harpic formula)

9. Germicide (izal formula)

10. Bleach (stain remover)

11. Liquid air freshener

12. Paint (only white and coated type)

13. Insecticide

14. Laundry bar soap

15. Medicated soap

16. Toilet soap

17. Petroleum jelly (vaseline)



This goes for a bonus price of 2,000 naira.





2nd Ebook (the new one)



NEW Ebook

1. Hair Conditioner



2. Anti-dandruff Hair shampoo (medicated Hair shampoo)


3. Perfume


4. After Shave


It goes for a token of 1,500 naira.



How to order, simply send me an email to:

goldzmyne@gmail.com

Or call: 07041786714.






Thanks.

Please how do i dissolve sls? I tried dissolving it some water but it stayed the same.
And also, please how do i make liquid soap transparent?

onyekanonso:
Please how do i dissolve sls? I tried dissolving it some water but it stayed the same.
And also, please how do i make liquid soap transparent?

Heyllo ma'am, the water you are using might not be enough, that's the basic reason the SLS isn't dissolving. Solution: increase the quantity of water you are using to dissolve the SLS and stir.



Transparent as how? Well, if you mean glowing; the liquid soap should glow using the method here, the colour should be light as in, not too much colorant should be added.


Thanks.

Heyllo everyone, my sincere apology to everyone I haven't been able to response to his/her mail. I shall do that today.



Thanks.

debolly:
Which of the shoprite...please.

dugbe

I trust we all had a great week. Here comes another weekend again, let's see what we can do together.
Wishing all of us a very sweet weekend.

Strongbest



Thanks.

Yes boss, a 1daful wkend to all.

Caustic soda...........1 cup
Soda ash.................1 cup
Oil (PKO)..................3 cups

INSTRUCTIONS:

1.Dilute the caustic soda with three cups of water

2.Dilute the soda ash with three cups of water also
You'll only be needing one cup each from the diluted caustic soda and soda ash. You can keep the remaining solution for another experiment or another batch of the experiment if you wish.

Or if you are not going for another batch, to avoid waste of your raw materials, simply use this formula:

-1/3cup of caustic soda diluted with one cup of water

-1/3 soda ash diluted with one cup of water

PROCEDURE

1. Put the oil in a dry pan or pot and apply heat enough to warm up the oil (do not fry please)
You may also just stir vigorously if you don't want to use heat at all in order to get your oil warmed up. But please, if the oil is in a solid state, make sure you apply heat to melt.

2. Add one cup of the diluted caustic soda (lye) and stir properly

3. Add 1 cup of the dissolved soda ash and stir properly also. Continue to stir till trace is reached.

Then pour the 'pap look like' solution into your prepared moulds. Allow to stand for 24 hours, remove from mould and allow to cure for 3-6 weeks.

What you'll have at the end of this experiment is a white colour soap.

ABOUT MOULD

You can use soap dishes (the plastic type) as your mould.
Or simply construct a wooden mould. You can ask for samples if you have no idea of what your wooden mould should look like.

Conclusion: you'll notice we didn't use up to 500 naira for this practical. And you still have enough chemicals left.
So, go ahead and produce your first bar soap. It'll encourage me to do more.


Thanks.


[/quote]


Hello Strongbest
Are we to use the 3 cups of Pko in this production?

Strongbest:
I trust we all had a great week. Here comes another weekend again, let's see what we can do together.
Wishing all of us a very sweet weekend.

Strongbest



Thanks.

Goodevening Oga strongbest u hv not replied my mail yet

Naijasecondhand:


Caustic soda...........1 cup
Soda ash.................1 cup
Oil (PKO)..................3 cups

INSTRUCTIONS:

1.Dilute the caustic soda with three cups of water

2.Dilute the soda ash with three cups of water also
You'll only be needing one cup each from the diluted caustic soda and soda ash. You can keep the remaining solution for another experiment or another batch of the experiment if you wish.

Or if you are not going for another batch, to avoid waste of your raw materials, simply use this formula:

-1/3cup of caustic soda diluted with one cup of water

-1/3 soda ash diluted with one cup of water

PROCEDURE

1. Put the oil in a dry pan or pot and apply heat enough to warm up the oil (do not fry please)
You may also just stir vigorously if you don't want to use heat at all in order to get your oil warmed up. But please, if the oil is in a solid state, make sure you apply heat to melt.

2. Add one cup of the diluted caustic soda (lye) and stir properly

3. Add 1 cup of the dissolved soda ash and stir properly also. Continue to stir till trace is reached.

Then pour the 'pap look like' solution into your prepared moulds. Allow to stand for 24 hours, remove from mould and allow to cure for 3-6 weeks.

What you'll have at the end of this experiment is a white colour soap.

ABOUT MOULD

You can use soap dishes (the plastic type) as your mould.
Or simply construct a wooden mould. You can ask for samples if you have no idea of what your wooden mould should look like.

Conclusion: you'll notice we didn't use up to 500 naira for this practical. And you still have enough chemicals left.
So, go ahead and produce your first bar soap. It'll encourage me to do more.


Thanks.





Hello Strongbest
Are we to use the 3 cups of Pko in this production?

Yes Sir.


Thanks.

Shininstar30:


Goodevening Oga strongbest u hv not replied my mail yet

Heyllo ma'am, which of your mails please? I just finished treating my mails. I should have replied to yours by now, in case I haven't, kindly resend please.

Sorry for any inconvenience.


Thanks.

BEAD MAKING ONLINE CLASS
ROTAD BEADS AND DECOR ONLINE BEAD MAKING
TRAINING SCHEME
LEARN BEAD MAKING ONLINE
ROTADBD offers online trainings for individuals
interested in making beads and who for the sake of
distance in location could not come for our one on
one training.
Rotadbd offers online training on different
categories as stated below:
continue reading @ http://rotadbeadsanddecor..in/p/bead-making-online-class.html?m=1

Happy new month to my beautiful people. Stay blessed.


Thanks.

Naijasecondhand:


Caustic soda...........1 cup
Soda ash.................1 cup
Oil (PKO)..................3 cups

INSTRUCTIONS:

1.Dilute the caustic soda with three cups of water

2.Dilute the soda ash with three cups of water also
You'll only be needing one cup each from the diluted caustic soda and soda ash. You can keep the remaining solution for another experiment or another batch of the experiment if you wish.

Or if you are not going for another batch, to avoid waste of your raw materials, simply use this formula:

-1/3cup of caustic soda diluted with one cup of water

-1/3 soda ash diluted with one cup of water

PROCEDURE

1. Put the oil in a dry pan or pot and apply heat enough to warm up the oil (do not fry please)
You may also just stir vigorously if you don't want to use heat at all in order to get your oil warmed up. But please, if the oil is in a solid state, make sure you apply heat to melt.

2. Add one cup of the diluted caustic soda (lye) and stir properly

3. Add 1 cup of the dissolved soda ash and stir properly also. Continue to stir till trace is reached.

Then pour the 'pap look like' solution into your prepared moulds. Allow to stand for 24 hours, remove from mould and allow to cure for 3-6 weeks.

What you'll have at the end of this experiment is a white colour soap.

ABOUT MOULD

You can use soap dishes (the plastic type) as your mould.
Or simply construct a wooden mould. You can ask for samples if you have no idea of what your wooden mould should look like.

Conclusion: you'll notice we didn't use up to 500 naira for this practical. And you still have enough chemicals left.
So, go ahead and produce your first bar soap. It'll encourage me to do more

yea, i was able 2 produce d soap, bt durin washin, i notice d soap melts fast. Pls wots d remedy 2 mk it last longer. Thanks

stadora:

yea, i was able 2 produce d soap, bt durin washin, i notice d soap melts fast. Pls wots d remedy 2 mk it last longer. Thanks

Heyllo Ma'am/Sir, did you allow the soap to cure before use? If you followed the method given here the soap should last long.

Try and let me know how long you kept the soap for curing before use.


Thanks.

lgboks:
good morning fellow producers
Glad to be back
Mr stongbest thanks for all the knowledge

All thanks to God. Good to have you back Sir. One of our most serious and dedicated member of this thread.

Thanks.

Good morning Strongbest, I have been following ur thread for quiet sometime now and I must say Kudos. I went market yesterday to buy items for bar soap production, the seller haven discover I know little about it insist I buy sulphurnic acid and sodium silicate for the bar soap. What's ur advice?

Adinije:
Good morning Strongbest, I have been following ur thread for quiet sometime now and I must say Kudos. I went market yesterday to buy items for bar soap production, the seller haven discover I know little about it insist I buy sulphurnic acid and sodium silicate for the bar soap. What's ur advice?

Heyllo ma'am, it's good to know you are here with us.

Seriously, you don't need sulphurnic acid in bar soap. You may get the sodium silicate. If you have a copy of my old ebook, you would notice we made use of it there in our toilet soap.

Basically, anything you use depends on the brand of soap you have in mind to produce.


Thanks.

Strongbest:



Heyllo ma'am, it's good to know you are here with us.

Seriously, you don't need sulphurnic acid in bar soap. You may get the sodium silicate. If you have a copy of my old ebook, you would notice we made use of it there in our toilet soap.

Basically, anything you use depends on the brand of soap you have in mind to produce.


Thanks.

thanks

Third productions of my liquid soap and toilet wash. Kudos to our Oga @top

Adinije:
thanks

My pleasure ma'am.

Thanks.

realadesco:
Third productions of my liquid soap and toilet wash. Kudos to our Oga @top

Awwww! Great work Sire. Keep it up please. I'm really impressed. But please, the listing of your items on your stickers should be coded.


Thanks.

Strongbest:





Awwww! Great work Sire. Keep it up please. I'm really impressed. But please, the listing of your items on your stickers should be coded.


Thanks.

noted boss

A special order for a special family, getting ready for delivery.

.......