kimond101:
If your flash drive is corrupted and the corrupt system changes your files to shortcuts,
Try this:

Check if the files are not in hidden mode.

Click on "Start" -->Run --> Type cmd and press Enter.

Here I assume your pendrive drive letter as G:

Enter this command.

attrib -h -r -s /s /d g:\*.* --> Press Enter

You can copy the above command --> Right-click in the Command Prompt and

paste it.

Note : Replace the letter g with your pen drive letter.

Now check your pen drive for the files.

Your files wouldn't be formated.

ideology:
thumbs up boss and all the techy guys. A similar thread made front page last year, i followed the steps and recovered 8Gig memory card and another 1Gig

ideology:
thumbs up boss and all the techy guys. A similar thread made front page last year, i followed the steps and recovered 8Gig memory card and another 1Gig

mokoshalb:
If you have a corrupt or damaged memory which you tried to format and it keeps replying you with WINDOWS CAN’T FORMAT DISK and you wish to repair it, kindly follow the following steps:-
Insert the corrupted memory card into a card reader, and then connect the card reader to the computer.

Procedures:
Open RUN on your computer (to open RUN click on the “start” icon and enter “search for program” then type in RUN or press ctrl-R on desktop
After opening RUN type in “CMD” in the provided text box.
After that, type in “DISKPART”.
Type in “LIST DISK”.
Type in “SELECT DISK 1”.
Type in “CLEAN”.
Type in “CREATE PARTITION PRIMARY”.
Type in “ACTIVE”.
Type in “SELECT PARTITION 1”.
Lastly type in “FORMAT FS=FAT32”.
:::
NOTE: You should wait for 30 - 45 Minutes for it to Finish loading 1 -100%
:::
After finishing this process remove your card reader from the computer USB port and also remove the SD card from the card reader……..that’s all.
:::
http://www.mokoshalb.com/2015/07/how-to-repair-damaged-or-corrupted-sd.html
:::

kaeforum:
Teach us how to recover data from hardisk disk that wont read on system.

cutetopsey:
Hmmmm!

Thanks bro @OP!

This information is very educative and helpful! Just had a damaged SD card yesterday. I must confess, it was so frustrating!

Thanks a lot @OP

BTW, check my signature for live testimonies on how to get rid excess ugly belly fats

mokoshalb:
If you have a corrupt or damaged memory which you tried to format and it keeps replying you with WINDOWS CAN’T FORMAT DISK and you wish to repair it, kindly follow the following steps:-
Insert the corrupted memory card into a card reader, and then connect the card reader to the computer.

Procedures:
Open RUN on your computer (to open RUN click on the “start” icon and enter “search for program” then type in RUN or press ctrl-R on desktop
After opening RUN type in “CMD” in the provided text box.
After that, type in “DISKPART”.
Type in “LIST DISK”.
Type in “SELECT DISK 1”.
Type in “CLEAN”.
Type in “CREATE PARTITION PRIMARY”.
Type in “ACTIVE”.
Type in “SELECT PARTITION 1”.
Lastly type in “FORMAT FS=FAT32”.
:::
NOTE: You should wait for 30 - 45 Minutes for it to Finish loading 1 -100%
:::
After finishing this process remove your card reader from the computer USB port and also remove the SD card from the card reader……..that’s all.
:::
http://www.mokoshalb.com/2015/07/how-to-repair-damaged-or-corrupted-sd.html
:::

Samyj247:
teach us d one dt will repair d files nd not lost it

missKiffy:
mokoshalb what if I don't have a card reader

prinsam30:
pls house wat can I do, all my files in my SD card are all showing shortcut

I mean all the files has shortcut icons

solution pls thank u

jonzy1:


Yes o, I have a 500gb hard disk that wouldn't read on my laptop

engrcos001:
I stopped at a place where you have to select a disk but it keep telling me that I have not selected any disk what will be the problem?

fretnot:
"chkdsk" command is your first choice for damaged SD card recovery. Requiring no format, it allows you to fix a corrupted SD card without data loss. Now let’s look how it works.
1. Plug in your SD card to your computer with a card reader.
2. Go to the start menu, type in "cmd" in a search bar, hit enter and then you can see something named "cmd. exe" under a list of programs.
3. Right click "cmd. exe" and then you will get the command windows that allow you to fix your corrupted SD card without format.
4. Note the drive of your sd card. Now you will go back to the command window and type in "chkdsk" then your card's drive letter, followed by a colon and /f (eg if the frive letter is H, just type: chkdsk H: /f)
After this is typed in, hit enter and wait for the program to go to work and find then fix any corruption on the card. This can take a few minutes, depending on the amount of corruption and on the storage size of the card