₦airaland Forum

Hi Some of you will be thinking how will I buy stuff to make rc plane, or u don't have any hobby shop in your area nor money , here follow this step's and u can make a free flight autonomous airplane that can fly with out any rx tx or esc nor servo etc , am victor Igwe.

step 1: the fuselage
This is a cardboard (carton) cut out a rectangle shape of 25cm long and 4.5cm wide.

Step 2: rudder and elevator
Here I use wood to make this elevator and rudder, I install it with Eposy gum.

...........

step3: wing
The wing is cut in 15cm + 15cm = 30cm long and 14cm wide, make a ''v'' shape long of 30cm long and make the airfoil gum it and fold it and add Eposy gum.

view.

adding pix here na wahala oo

Here are what am talking about.

it will look airfoil shape, flat bottom.

STEP4 : install the motor.
Here I use 2.50a dc brushless motor from mixer amp, it is powerful and it has an esc inbuild, 2.50a esc using sensor to move, 12v DC,

brushless and the prop on it is diy I made it my self with wood.

make a wood cross were u can house ur motor.

install the cross shape to the plane nose, the nose is four corner shape, make wide rectangle hole were the cross shape can hook.

next

adenuga558:
next

image na problem to add here...

house it inside and glue it.

install the motor with Eposy gum to glue it.

open the cg, were u can install ur battery and switch.

tap your plane wing, here I use green tap, it help the air to flow smoothly to the air foil and it hold the air foil and make it strung.

come back to the elevator, Note: the elevator most be up so the it will maintain the gentle movement when flying, glue the elevator like that, live the rudder straight like that.

Now we are done with the body, next step is the landing geared.

step5: landing gear
I use a tiny rod and a wheel got from car record caset, I bend it 5cm and I make a rectangle hole under were I install it, and support it with a wood to hold it strong and I glue it.

what about d servo

Following.

following bro

adenuga558:
what about d servo

This is a free flight it don't need any servo.

landing wheel

house ur switch, remember the motor I use was 2.50a she throttle it self, under autonomous, also install battery to the cg.

let see d flight video

let see d flight pic

adenuga558:
let see d flight pic

Wait let me finish I will send it.

battery 3s4p that means 3cells by 4 parallels, 11.1v 3500mah