₦airaland Forum

kripen:
This price giving for hardwood can it be applicable in South South specifically Edo state

HsLBroker:
A home is gotten when you look for comfort based on your fantasy, but a shelter is a necessity, and a building becomes a shelter when it can prevent rain,water,sun, strong wind and other climatic elements from affecting the occupants- human,animal, living and dead loads with personal effects.

As far as I am concerned the moment you have your roof placed on a building, other things are important but they are basically needs. You can’t move into a house without a roof , but we have seen people living in a house with no window or makeshifts windows covered with ordinary bags and cardboards.

So it is very important to calculate the dimension of the true length of a roof members. These dimensions are essential to determine the accurate span of Rafter, Wall plate, Tie beam, King Post, Overhang, Purlins, fan struts etc.

Residential timber-framing construction clearly differentiate between spacing and span Spacing the centre-to-centre distance between structural members, unless otherwise indicated.

Span the face-to-face distance between points capable of giving full support to structural members or assemblies. In particular, rafter spans are measured as the distance between points of support along the length of the rafter and not as the horizontal projection of this distance.

Single span the span of a member supported at or near both ends with no intermediate supports.

Continuous span the term applied to members supported at or near both ends and at one or more intermediate points such that no span is greater than twice another.

Span/length calculation for roof members.

As can be seen the span of the rafter in the figure below is not quite in agreement with the Code but we will use the figures for the rafter span as calculated below.

Wood/ timber are sawn into various sizes amongst are

2” by 2” i.e 50mm by 50mm

2” by 3” i.e 50mm by 75mm

2” by 4” i.e 50mm by 100mm

2” by 6” i.e 50mm by 150mm

3” by 4” i.e 75mm by 100mm

3” by 6” i.e 75mm by 150mm

HsLBroker:
.

HsLBroker:
Hardwood for roofing still available for sale,

Fadala and Ban saw available call 08114018823 for more information

HsLBroker:
.

HsLBroker:
hardwood still available for sale

kripen:
This price giving for hardwood can it be applicable in South South specifically Edo state

HsLBroker:
A home is gotten when you look for comfort based on your fantasy, but a shelter is a necessity, and a building becomes a shelter when it can prevent rain,water,sun, strong wind and other climatic elements from affecting the occupants- human,animal, living and dead loads with personal effects.

As far as I am concerned the moment you have your roof placed on a building, other things are important but they are basically needs. You can’t move into a house without a roof , but we have seen people living in a house with no window or makeshifts windows covered with ordinary bags and cardboards.

So it is very important to calculate the dimension of the true length of a roof members. These dimensions are essential to determine the accurate span of Rafter, Wall plate, Tie beam, King Post, Overhang, Purlins, fan struts etc.

Residential timber-framing construction clearly differentiate between spacing and span Spacing the centre-to-centre distance between structural members, unless otherwise indicated.

Span the face-to-face distance between points capable of giving full support to structural members or assemblies. In particular, rafter spans are measured as the distance between points of support along the length of the rafter and not as the horizontal projection of this distance.

Single span the span of a member supported at or near both ends with no intermediate supports.

Continuous span the term applied to members supported at or near both ends and at one or more intermediate points such that no span is greater than twice another.

Span/length calculation for roof members.

As can be seen the span of the rafter in the figure below is not quite in agreement with the Code but we will use the figures for the rafter span as calculated below.

Wood/ timber are sawn into various sizes amongst are

2” by 2” i.e 50mm by 50mm

2” by 3” i.e 50mm by 75mm

2” by 4” i.e 50mm by 100mm

2” by 6” i.e 50mm by 150mm

3” by 4” i.e 75mm by 100mm

3” by 6” i.e 75mm by 150mm

HsLBroker:
Hardwood for roofing still available for sale,

Fadala and Ban saw available call 08114018823 for more information

HsLBroker:
New work at edo state

HsLBroker:
...

HsLBroker:
Happy monday to you all

SoftHeart:
Greetings,
I got this quote for roofing and ceiling wood for a building whose dimension is about 14.6m by 15.4m approximately.
3*4 30pcs
2*4 230pcs
2*3 280pcs
1*12 25pcs
2*2 250pcs

Please how close is this to reality?

I currently don't have the roofing plan with me. Using the approximate dimension how close is this quote to reality?

Thanks

SoftHeart:
Greetings,
I got this quote for roofing and ceiling wood for a building whose dimension is about 14.6m by 15.4m approximately.
3*4 30pcs
2*4 230pcs
2*3 280pcs
1*12 25pcs
2*2 250pcs

Please how close is this to reality?

I currently don't have the roofing plan with me. Using the approximate dimension how close is this quote to reality?

Thanks

SoftHeart:
Greetings,
I got this quote for roofing and ceiling wood for a building whose dimension is about 14.6m by 15.4m approximately.
3*4 30pcs
2*4 230pcs
2*3 280pcs
1*12 25pcs
2*2 250pcs

Please how close is this to reality?

I currently don't have the roofing plan with me. Using the approximate dimension how close is this quote to reality?

Thanks

HsLBroker:
.

HsLBroker:
when buying hardwood for roofing, consider Akun, Itara, Ogborugboru, Koko Igbo, Ayin, they are good wood that stand the test of time