akata1:
between diesel engine and petrol engine which one is good or advisable for laundry business

enochogaga:


What is the litter's of ur fridge?

dolarland:
Pls excluding tec gens and honda

Which gen brand in d rang of 2.5 to 3.0kw
Produce gen with less noise cause this is what I hate most.
I mean in the likes of
Semec
Sumec firman
Lutian
Senci
Maxi
Elepaq

enochogaga:
HOW MUCH WILL ORIGINAL SUMEC FIRMAN SPG2500/2900 2KW/2.2KW COST?

Yes sir

lilclin:
1) I would suggest you get thermocool Junior max and it's very fuel efficient
2) thermocool doesn't have fake .. at least I've not seen any.. I got the tec Junior max 54k in Owerri
3) budget like 40-50k

dolarland:
Pls excluding tec gens and honda

Which gen brand in d rang of 2.5 to 3.0kw
Produce gen with less noise cause this is what I hate most.
I mean in the likes of
Semec
Sumec firman
Lutian
Senci
Maxi
Elepaq

keneguae:


Sumec Firman, of course.

I will suggest you go for Firman FPG3800e2(2.5W). Very low noise.

Also, when it comes to noise, please note that where you put the gen also determines how noisy it could or could not be. If you put your generator in an open place(outside), it tends to make less noise than when you put it at your front or back balcony. Just an observation.

DZTech:
sir
pls I have a small gen that's burning things.
I just repaired it o!
chargers for phones and laptops don burn, soldering iron, even monitor had 2 loud bangs!
fear just kept me from turning it on, tho d light comes on.
pls, wots cosin it?
Tnx sa!

meks007:
Good morning house,
I have a tiger gen, TG2700 model.
It a nuisance to my ears as it gets very loud whenever it's on.
It works fine though... I just wanna know if something can be done to reduce the unbearable noise. thanks

CelebrityP:
Hello.I would appreciate reviews on lutian 3.5KVA manual starter generator LT3600.
I ve a 32 inch TV, an industrial machine and iron, can it also carry my hisense fridge 100L, not at the same time with the iron though.thank you

enochogaga:



Manual or Auto?

enochogaga:


The noise is from where? The coil side or the engine block side?

enochogaga:


Firing speed to high reduce it, and is advisable to use stab, so that even if the voltage is more than 250 the stab will regulate it or will not supply

allansie:
I was told TEC parts are not easily available..pls how true is this?

DZTech:
pls how do I locate d pin?
I was even thinking it's d capacitor?
2kva stab is connected.

ozoneymcm:

What is the difference

jeraw:
I would like to know the cost of both and how to identify original. Thanks

EZINNE1759:
Please I need help y'all. I just bought this small sumec firman gen two days ago and things are just burning like dodo in my house. Two follow come chargers, energy saving bulb and extension. I took it back to the dealership to reduce the current and he did. My bulb is now dimmer than before so I can tell the current dropped but still ill another charger and bulb burnt. What can I do to remedy this? Can this be as a result of not having strong appliances to draw the current because I only have a TV, my phones and bulbs. I have fridge and washing machine too but obviously I can't plug those na. I'm almost regretting the money spent.

enochogaga:


Coil noise side is cause by amateur bearing or the cover, then if is from engine is likely to be ur crank shaft and bearings

Momoney77:
Greetings to you Prof. How are you doing?

I took this picture of my sumec 1800. pls where can I adjust the current/voltage.. I mean can you point out the srew for me in this picture.

dolarland:
Pls excluding tec gens and honda

Which gen brand in d rang of 2.5 to 3.0kw
Produce gen with less noise cause this is what I hate most.
I mean in the likes of
Semec
Sumec firman
Lutian
Senci
Maxi
Elepaq

Momoney77:
Greetings to you Prof. How are you doing?

I took this picture of my sumec 1800. pls where can I adjust the current/voltage.. I mean can you point out the srew for me in this picture.

busar:
the marked area