General Topic Thread-To Discuss Anything And Everything in Building Construction - Properties (1129) - Nairaland
Nairaland Forum › Nairaland General › Properties › General Topic Thread-To Discuss Anything And Everything in Building Construction (6126248 Views)
1 2 3 ... 1126 1127 1128 1129 1130 1131 1132 ... 3983 Reply (Go Down)
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by shelliz: 8:26pm On Mar 12, 2019 |
Thanks alot @Ife barbie. Please was the floor of the soakaway floored with concrete and cement alongside the septic tank or it was only the septic tank tat was floored and plastered? |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by IFEBARBIE: 8:31pm On Mar 12, 2019 |
IFEBARBIE:
|
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by IFEBARBIE: 8:32pm On Mar 12, 2019 |
shelliz:Only the septic tank bro... |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by rotecch77(m): 9:49pm On Mar 12, 2019*. Modified: 10:27pm On Mar 12, 2019 |
shelliz:I like most replied you have gotten so far here. But if will look at this quote very well is not too much on high side as some people exaggerated it. Although few of the items are slightly on high side. A. The size of your suckaway and septic tank will determine the cost. 1.cost of digging 2 unit of complete suckaway/ septic tank in lagos range btw 25-30 for 1unit, means 50- 60k for the 2 unit.(your quote says 50k STILL GOOD RATE. 2.Setting of block for the 2 unit will cost you around . Let say each unit is 400 block x2=800 ×50each=40,000 Your quote says 48,000 SLIGHTLY OK this will based on the size of the Suckaway/septic tank. 3.Carpenter : here in lagos for each unit it will cost about 10-15 x 2uint 20-30 ( this depends on area) 4 Iron bender same as carpenter. 5 .labour for casting both the columns, beam, and slab for the 2 unit will cost around 25-35k ( this also depends on your location bcs some labour now charge 3k for casting and bricklayer 3.5k. Material. CEMENT; 40 bags of cement for the 2unit means 20bags for each unit (a) settings of 400 block, floor casting, beams, columns, slab with good ratio lats say ratio 1;2;4 i will say ( your quote of 40bags is PERFECTLY OK REINFORCEMENT, .as i said ealier .the size of the septic tanks will determine this but something 35-40 lenght of 12mm will do the beam, columns, slab of the 2 units.(note this is for regular septic tanks and suckaway) But if you are still not ok with him you can buy your materials LET ME STOP HERE FOR OTHERS. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by buzzetin(m): 10:16pm On Mar 12, 2019 |
GoodFaith:@ Goodfaith, please I have a project in Uhie, after the bypass. I think I will contact you. Thanks |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Hum2020: 6:02am On Mar 13, 2019 |
shelliz: |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Hum2020: 6:04am On Mar 13, 2019 |
Pls op this quotation is too high ok just look for other builder ok |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by twinskenny(m): 6:29am On Mar 13, 2019 |
shelliz:we presently doing a project in benin also... electrical |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by DealAgent: 9:41am On Mar 13, 2019 |
A plot of land for sale at a busy intersection in the beautiful city of Enugu, a very good spot for business with 24/7 security. Interested investors can call this number 08166563345. price 25m, slightly negotiable. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by oalandAgents2: 9:54am On Mar 13, 2019 |
hi good morning all mufutau55: |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by oalandAgents2: 9:56am On Mar 13, 2019 |
hi good morning all mufutau55: |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by soleexx(m): 10:45am On Mar 13, 2019 |
Good morning guys pls I need your help with twins hotels face each other ROOFING ESTIMATION ...to be done separately God bless |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by 4newguy: 11:10am On Mar 13, 2019 |
@shelliz id advise you get people outside Edo state for your septic tank. Everything in Benin city is expensive even Labour. I currently have a project at Amagba and jobs from foundation to roofing has been done from people outside the Edo state. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by SanniOluwafemi(m): 11:59am On Mar 13, 2019 |
Maplewood Furniture Nigeria Enterprises is into furniture and interior decoration. Its products include: Kitchen Cabinet Bed Wardrobe Sofa Office Furniture Doors - Paneled & Flushed Upholstery Dinning Tables and Chairs All Joineries Our mission is to create value for our customers through Reliability, Flexibility, Integrity and Excellent Service Delivery. We want every Maplewood Furniture experience to be warm, worry-free, and comfortable through respect and trust. Contact us: Tel: 08022283035 Email: maplewood04@yahoo.com Like our Facebook Page: Maplewood Furniture ...Providing High Quality Furniture |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 2:09pm On Mar 13, 2019*. Modified: 3:12pm On Mar 13, 2019 |
rotecch77:In Benin one bricklayer and a services set 100 block ( bricklayer 3k ,service 2k) to set 400 block will be 20k 20 bags for one? ---- Get real to set 100 block is one bag of cement To set 400 block let us say 5 bags rotecch77@ take your time oh The dude is getting robbed |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 2:19pm On Mar 13, 2019 |
4newguy:Families and contractor are robbing people that don't live in Nigeria Please don't come here and tell me nonsense I know better Carpenter told me to do my wood work 280K-- I paid 100k stone coated the dude told me (500sq) 1,375,000.00--I paid 965,000 it was 375sq to put the roof I paid 60k The same dude rob me about three year back told me the roof was about 500sq This year he came and told me my new building was about 500sq Call Agen Agen sent somebody to go get the measurement it was 375sq Told him he wasn't going to rob me for the second time |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 2:31pm On Mar 13, 2019 |
buzzetin:Dude , I am not a contractor I just hate the way the dude was getting robbed 755k for two what? I was just going try to help him on my visit why working on my stuff too |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by 4newguy: 3:28pm On Mar 13, 2019 |
GoodFaith:Its obvious the OP builder is trying to act smart. Only God can help someone from not been ripped off. That's why I try to do my research properly or ask. Btw there was no need for this "Please don't come here and tell me nonsense". I ain't the OP builder One love |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by soulchuks: 3:49pm On Mar 13, 2019 |
hi good day mufutau55: |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 4:17pm On Mar 13, 2019 |
4newguy:Love you too bro Have a great day |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by rotecch77(m): 5:04pm On Mar 13, 2019 |
GoodFaith:Ok i hear you. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 5:07pm On Mar 13, 2019 |
rotecch77:Ok, have a great day |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by arcnomec(m): 5:27pm On Mar 13, 2019*. Modified: 11:25pm On Mar 13, 2019 |
Good evening fellows,please I need some advise from you guys.A client contacted me that one of self Con built for her by an engineer is flooding inside the room.That water use to come out from the floor and it will raise to a level and then affect a two bedroom unit close to it. She asked if I can remedy the situation.I intend cutting the wall from about 450mm above(finished floor level).Then break the floor and dig down to about 600mm,fill with sharp sand and blocks, and recast(cement & 3/ with a damp proof membrane.Please if there is another way I can achieve a desired result, kindly help me out with such. Thanks |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by adanny01(m): 5:31pm On Mar 13, 2019*. Modified: 5:54pm On Mar 13, 2019 |
UnitedAlliance:That is structural steel design. Even though what we did on structural steel design as civil engineers is one 3 credit course if i have not forgotten but the foundational knowledge to attend that class started from 200level with Introduction to structural analysis(Civil) and Strength of materials (Mechanical) with several related courses that one would start explaining, we may even have to start from o levels. Modified Lest i forget, height is mechanical service design. 2 professionals are responsible for that; mechanical engineer or water resources engineer, even though as a civil engineer, i have relevant training to do that design. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 5:49pm On Mar 13, 2019 |
adanny01:why ![]() why not build two bbq and put it on top if you have the space I am listening |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by adanny01(m): 6:15pm On Mar 13, 2019 |
GoodFaith:Do you have "Structural steel design to BS 5950: Part 1" so we can proceed. Before then, we would visit the basics by discussing bending especially formulas like wl²/8 and bending moment analysis. We would also discuss failure of steel sections, The problem is building a structural intuition in your mind that when you see a structure, you view the dynamics of forces affecting it. That is the aim. Any short cuts usually leads to over or under design. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by buzzetin(m): 7:28pm On Mar 13, 2019 |
GoodFaith:Bro , I know that u are not a contractor. I just needed u to point me to the right direction in roofing. Which u already explained by your Agen . Thanks |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by GoodFaith: 7:32pm On Mar 13, 2019*. Modified: 8:48pm On Mar 13, 2019 |
buzzetin:I WILL SURELY HELP U- U WILL SAFE LOT OF MONEY I can give you a number for somebody to buy your wood from sawmill - the dude got hell from me, he ask my brother if I was in the military The carpenter said it was a very good wood If you are buy now wood 3x4---2000 each 2x4---1000 2x3---900 2x2----600 The measurement after the wood work-YOU MUST WORK VERY HARD TO MAKE SURE THEY DON'T ROB YOU-- THEY CAN GET YOU FOR OVER 400K BETWEEN ME AND ONE OF MY FAMILY MEMBER THE DUDE WAS GOING TO GET US FOR OVER 800K SAD Somebody number at Agen to help CARPENTER FOR TWO FLAT WOOD WORK DON'T PAY MORE THAN 120K IF YOU PAY THE CARPENTER 120K, THE DUDE WILL MAKE OVER 60K FOR HIMSEF FOR LESS THAN TWO DAYS WORK send me your email I have sent you email Your email samconley@mail.com do you live in the Midwest? |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by luvablesam(m): 10:23pm On Mar 13, 2019 |
I need someone who can draw up a block of classroom (nursery $primary school).. Land Size, 60x120 |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by diordaves(m): 10:55pm On Mar 13, 2019 |
shelliz:60 lengths of 12mm rod? You may need close to this number of rods IF the tanks will be beamed at the middle after about 6 courses of blocks and beamed again at the top. Also you may need this quantity of rods IF there are a total of 6 columns per tank. So before you cry faul, take another critical look at the structural design. The cost is in the details. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by diordaves(m): 11:04pm On Mar 13, 2019 |
shelliz:N138,000 for wood? You definitely, definitely won't spend anything close to this. About N30,000 is a realistic budget for wood. You only need minimal amount of wood for the formwork for the beams and columns. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by diordaves(m): 11:20pm On Mar 13, 2019 |
shelliz:A total of 40 bags of cements looks good for the whole work. Granite looks good for best practice beaming and columns. You DON'T need bamboo. 2 trips of sand looks good but under N30,000 would be a good budget. |
Discuss Anything Property And Lets Make Money In The Process • Residential Building Construction Mistakes In Nigeria You Need To Avoid • General Topic Thread - The Roforofo Thread Of Construction Activities • 2 • 3 • 4
Viewing this topic: Larryage(m) and 5 guest(s)
with a damp proof membrane.