₦airaland Forum

Hi gurus I have a 2005 bmw 330xi coja four wheel drive with what looks like k-legs at the front tyres. From the front view of my car u would notice the legs are not straight but rather bent. What could be the cause and how do I fix this issue. Will appreciate your contributions.

elviszzz:
Hi gurus I have a 2005 bmw 330xi coja four wheel drive with what looks like k-legs at the front tyres. From the front view of my car u would notice the legs are not straight but rather bent. What could be the cause and how do I fix this issue. Will appreciate your contributions.

You have excessive negative camber.

Most likely is that you have badly worn lower arm bushing( or camber bushing). By now you should be having clunking suspension?

If you are certain that every other suspension parts are okay, adjust camber through the three bolts on top of the shock absorber, in the engine bay.

Inception:
You have excessive negative camber.

Most likely is that you have badly worn lower arm bushing( or camber bushing). By now you should be having clunking suspension?

Yes I have a clunking suspension, that means I will have to replace either the lower arm or camber bushing.

EngRichie:
If you are certain that every other suspension parts are okay, adjust camber through the three bolts on top of the shock absorber, in the engine bay.

Will have my mechanic check it, thanks for the info.

EngRichie:
If you are certain that every other suspension parts are okay, adjust camber through the three bolts on top of the shock absorber, in the engine bay.

plzzzz bro how do I adjust camber on the three bolts on top shock absorbers, plzzz

To make everything visible to you, raise the front of car, remove the tire, slack the three bolts holding the struts at the top slightly, try to shake/move/turn the strut and you will see how it adjusts. Tighten bolts at the desired position. This adjustment is meant to be done with tool that can read camber angle but in the absence of any, adjustment by visual inspection will be better than non.

franksam2009:
plzzzz bro how do I adjust camber on the three bolts on top shock absorbers, plzzz