₦airaland Forum

Welcome, Guest: Register • Login • With Google • Trending • Recent • New

Stats: 3,328,300 members, 8,435,092 topics. Date: Saturday, 27 June 2026 at 10:06 PM

Toggle theme

USING UPS AS INVERTER 24HRS - Science/Technology - Nairaland

Nairaland Forum › Science/Technology › USING UPS AS INVERTER 24HRS (8426 Views)

1 2 3 4 Reply (Go Down)

USING UPS AS INVERTER 24HRS by MrTony34(op):
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what the ups can do apart from the short time back it does.

Due to its good functionality and features many inverter nowadays have ups mode selefftionode you can switch on between to prevent interruption of power during power failure.

UPS has has some features and merit over sachet inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load

How to turn it into inverter for use
Step 1
Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect them from their cable

Step3
Those two wires of black and red are your positive and negative . Strip the insulations and join a cable on them to extend the length

Step 5
Tape the jointed point and pass them outside of the ups casing

Step 6
Get any inverter battery of your choice of 45ah,75ah, 100ah, 200ah and connect the wires to the battery terminals respectively

Step 7
Get a battery charger of 12v to charge the battery

Step 8
Check the picture below for proper understanding or request for video on my whatsapp ...note: full video is 2k.

Benefit: try it at home and you will definitely enjoy it. It is very cost effective and economical. Reduces cost of fuel.

Solar panel can be added to it if you desire especially those who are in an area where is no supply of electricity.....( this set can power tv, charge phones, decoder, small fan,)

Pls note: 650va ups can only carry max. Of load 400w while 1.5kva with max load of 800w.. use led bulbs only

Call/ whatsapp for any info.
,
TONYTEQUE SERVICES LTD ( RC in Nig.)
We specialized in Sales, Repair and expert installation of INVERTER || SOLAR || SOLAR STREET LIGHT || SOLAR WATER PUMP || CCTV || ELECTRICAL BUILDING WIRING & SOLAR ENERGY CONSULTANT

CALL AN EXPERT TODAY
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7

ALSO CHECK:
HOW TO CALCULATE THE NUMBER OF SOLAR PANEL THAT CAN CHARGE YOUR NUMBER OF BATTERIES.
https://www.nairaland.com/6132013/how-calculate-number-solar-panel
8 Likes 5 Shares
Share

Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 5:42pm On Jan 29, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
We pride out self for quality and proficiency in our services
1 Like
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 8:26am On Jan 30, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 7:11pm On Jan 30, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Quality services assured
1 Like
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 4:27pm On Jan 31, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality po wer to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Try us today
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 12:35pm On Feb 01, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 8:20am On Feb 03, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Promo is on
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 11:24pm On Feb 03, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tonytech services
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:11pm On Feb 04, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:08am On Feb 05, 2020
MrTony34:
Thank you for checking for this new innovation. One thing I want you to know is that ups( uninterrupted power supply) can be used as inverter. It is what Many of us don't have the idea of on what ups can do. apart from it's short time back is known for
It can also be used as inverter for long hours back for load in the house.

Due to its good functionality and features good inverters nowadays have ups selection mode on them you can switch to, to prevent interruption when there is power failure.

UPS has many good features and merit over sachet /pocket inverters.
1. It regulates voltage during fluctuation
2. It provides quality power to load
3. It provides constant voltage
4 it serves as isolation btw mains and load
5 it protects loads from over voltage

How to turn it into inverter for use
Step 1
Carefully locate and Unscrew the ups casing

Step2
Locate the internal connected battery(ies) and disconnect it

Step3
Those two wires of black and red disconnected from the battery(ies) are your positive and negative wire. Cut the tip and Strip the insulation part to be used

Step 5
Get a flex conductor wire of black and red and connect them together. Black to balack and red to red and tape it properly

Step 6
Get any inverter battery of your choice. There are 45ah,75ah, 100ah, 200ah as u can afford. Then connect wires to the battery terminals as indicated red to red and black to black and tighten well

Step 7
Get a battery charger. There are 10a, 30a, 30a, 40a etc. Clip charger crocodile clip on the battery terminal and get the charger power cord plugged on the wall socket to charge the battery with power supply

Step 8
Connect your load at the back of your ups to power your load in the house

Below is a picture of mine. It is what i am using for 2yrs as my inverter

This can save cost of inverter of high cost because It is cheap and affordable. Cost of UPS range from 4k based on capacity u require for your load ( we have ups of 650va, 1.5kva , 1.2kva, 2.0kva, 2.5kva etc)

based on limited capacitt it is Suitable for a room , a room self contained , mini flat and 2bedroom flat.
.
The total of cost of doing this cannot cost you more than 40k, 50k, 60k,70k depending your battery choice of capacity.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services
Providing you quality services at all time

Our services include installation, sales and maintenance of all kinds of
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tony tech services
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:59am On Feb 05, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel and the right capacity of inverter to use for your load in the house.

I chose to do this because this is one of the challenging side most of our installers have which brings about under estimation based on guess of the number of solar panel that can charge a battery adequatly during the day before sunset.

Many of us who dont have the idea on how to put this in calculation end up causing the early damage of battery life span and incuring cost for that customer and end up losing the them made them.

All these experenced challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Even if you are not and engineering bases you can still beable to do this with ease.

Below are the calculations .your comment and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Try us today
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 12:47pm On Feb 05, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tonytech services ltd
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 6:41am On Feb 06, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tonytech services
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 3:12pm On Feb 06, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 9:11am On Feb 08, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tonytech services
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 1:59pm On Feb 14, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Expert in inverter and solar system
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 7:43am On Feb 15, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Your reliable power solution
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 3:50am On Feb 16, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

Below are the calculations .your comments, contributions and suggestions are welcomed.

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Reiable power solution
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 7:59am On Feb 18, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 3:42am On Feb 22, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Tonytech
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 3:09pm On Feb 23, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
The experts in solar system
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 11:38am On Feb 25, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Quality is assured
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:48am On Mar 13, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Your reliable power solution
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 6:27am On Mar 20, 2020
MrTony34:
Your reliable power solution
Call us today
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 12:26am On Mar 21, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Call us
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 6:40am On Mar 21, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Call an expert
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:03am On Mar 22, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Thank you
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 7:54pm On Mar 22, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Call us today
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 7:17pm On Mar 24, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 10:52pm On Mar 25, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Thank u
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 6:58pm On Mar 26, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Try the experts
Share
Re: USING UPS AS INVERTER 24HRS by MrTony34(op): 9:31pm On Mar 28, 2020
MrTony34:
Thank you for checking out.
In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.

I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.

Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.

When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.

All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.

We shall commence in doing the calculation one after the other.

What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.

I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home

There are three types of inverter
1 square wave inverter
2. Modifies sine wave
3. Pure sinewave inverter

Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.

Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.

Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others

Many people mistake inverter to solar panel and battery.

Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.

Solar Panel cannot work alone without inverter and battery.

Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.

Below are the calculations

HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD
To do that you will need to know first the total load in your house.
Supposed you have:
1. TV 50"....60w
2. Decoder ...25w
3.fan 62".....80w
4. 10 lights each 25w.x10=250w

Total power ...415w
What is the capacity of ups/inverter to carry the load (415w)

We divide the the power load (415w) by
one of the standardd power factor (0.8, 0.7,0.6)
That will give us ...415/0.7 =519va

Therefore we will need 600va or 650va inverter/ups to carry the load.

Note that It is recommended to chose inverter/ ups bigger than the one we need.

HOW TO CALCULATE BATTERY BACKUP TIME.
supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?

Firstly multiply the battery voltage by the amp hour.
200ah x 12v =2400wh x2 =4800wh
Divide by the load ..4800wh/415w =11hrs.5min

Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.


HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.

Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above

If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1
0.1x 200 = 20a..
Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.

HOW TO CALCULATE CHARGING TIME
that will be battery ah divide by charging current.

200ah/20a = 10hrs

HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY
suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply.
It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.

Power is v x a i.e 12 x 20 =240w

We need 240w solar panel to charge our battery
Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .

Tonytech services ltd
Providing you quality services at all time

Our services includes installation, sales and maintenance of:
1 inverter
2 solar panel
3 cctv
4 electrical
5 solar street light etc
6 computer system

Call an expert today.
WhatsApp 0.8.1.8.0.7.2.9.6.1.2.,
Call 0.7.0.1.0.4.2.3.3.3.7
Try us today
Share
1 2 3 4 Reply

Power Your Sensitive Appliances With Online Ups • How to Turn ups to inverter 4 long hours back up • Turning ups to inverter • 2 • 3 • 4

Millionaires Blueprint Scam Review | How Do I Get Millionaires Blueprint • 10 Greatest Scientists Of The World • Microsoft Finally Discard It’s Gun Emoji, After Google, Facebook And Apple