Re: USING UPS AS INVERTER 24HRS by forexsignalsnow: 8:04pm On May 22, 2020 |
Hello good evening all Can i use this 6v fan ( https://www./rechargeable-16-wall-fan-with-remote-control-andrakk-mpg1192241.html) with my 12v 1kva inverter? i read it accepts AC and DC. The connection i have currently is DC Also, can i use a 70watts fridge on my 1kva inverter if i get 3 (150w solar panels) connected to it? what if i chose to use the fridge on it only during the day when there is sunlight? will it affect my 200ah battery? |
|
Re: USING UPS AS INVERTER 24HRS by MrTony34: 7:33pm On May 23, 2020 |
Lovelynife:
Thanks for your response. 1) hope 12/20A is not too much for 100ah battery? 2)is the suoer charger have overcharge protect? e.g can i charge it when I left for school like 6-9hours without spoiling or overcharge the battery? Is ok and is smart charger |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 11:27pm On May 25, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
|
Re: USING UPS AS INVERTER 24HRS by MrTony34: 12:48pm On Jun 07, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Thanks |
Re: USING UPS AS INVERTER 24HRS by NAIHCOTECH1996(m): 10:10pm On Jun 07, 2020 |
my name is Nnamdi, I have a blog where I write an article about solar products. https://www.naihcotech.com/can I get your contact so as to serve my customers promptly no matter their location? you can reach me with this number +2348130516146 |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 12:55am On Jun 08, 2020 |
NAIHCOTECH1996: my name is Nnamdi, I have a blog where I write an article about solar products. https://www.naihcotech.com/
can I get your contact so as to serve my customers promptly no matter their location? you can reach me with this number +2348130516146 Much thanks to you Engr. Nnamdi. It is my great pleasure to have you. This is my no.0.8.1.8.0.7.2.9.6.1.2 |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 10:16am On Jun 18, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Chose renewable energy today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 8:10am On Jun 28, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Call us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 1:52am On Jul 11, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 4:41pm On Jul 11, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today and you will not regret |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 6:49pm On Jul 12, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Happy sunday |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 9:26am On Jul 13, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Our services are reliable |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 12:20am On Jul 14, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 3:05pm On Jul 26, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Call us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 4:18pm On Jul 27, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 7:48am On Jul 28, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 9:10am On Aug 10, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 5:32pm On Aug 10, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 9:34am On Aug 11, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 1:09pm On Aug 11, 2020 |
[quote author=MrTony34 post=86205325]Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7 [/quote Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 7:05pm On Aug 11, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 8:16am On Aug 12, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 1:40am On Aug 13, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 2:02pm On Aug 13, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 10:04am On Aug 16, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 7:05am On Aug 17, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 10:00am On Aug 19, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 8:24am On Aug 20, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |
Re: USING UPS AS INVERTER 24HRS by Femgold11(m): 7:50pm On Aug 23, 2020 |
Which is the best to use between inverter and ups |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 8:13am On Aug 24, 2020 |
Femgold11: Which is the best to use between inverter and ups I use ups...but if u can afford inverter go for it..even if it is used |
Re: USING UPS AS INVERTER 24HRS by MrTony34: 8:25am On Aug 24, 2020 |
MrTony34: Thank you for checking out. In this place i will teach you on how you can successful chose the right number of solar panel that will charge your inverter battery adequately during the day and the right capacity of inverter to choose and use for your load.
I choose to do this because, it is one of the challenging side most of our installers have that brings about under estimation based on guess, of the estimated number of solar panel required to charge inverter battery adequately and efficiently during the day of sunrise.
Many dont have the idea on how the expert do it and that is cause of this write-up. Almost all engineering work involves planning and that planing is CALCULATION.
When you dont know how the experts do this calculation this how you end up causing the early damage of battery life span and incuring more cost for that customer and end up losing the them as possible. Because getting it right at first is ths key.
All these challenges are what i will treat here to enable you have confidence in yourself with no doubt of your potentiality. Though, if you have no engineering bases you can still be able to do it with ease.
We shall commence in doing the calculation one after the other.
What is an inverter? Is an electronic device that invert dc battery input to output ac for powering of our electrical appliances.
I.e it converts direct current from battery into alternating current. It is the ac output we use to power our devices at home
There are three types of inverter 1 square wave inverter 2. Modifies sine wave 3. Pure sinewave inverter
Square wave inverter produces alternating current that is not smooth and which is very harmful to our home appliances.
Modified sine wave has more better smooth wave than square wave which could be used to power some home appliances.
Pure sine wave produces pure smooth wave exactly like the one power grid supplies to us. But this inverter is more expensive than others
Many people mistake inverter to solar panel and battery.
Solar panel is just an alternative source of power to charge our battery in the absence of power supply. Battery is used to store charges from the panel or from the power supply through inverter charging circuit or by a saparate charger device.
Solar Panel cannot work alone without inverter and battery.
Some Inverter can work alone without battery but will go off as soon as nepa goes of because there is no battery as backup.
Below are the calculations
HOW TO KNOW THE CAPACITY OF INVERTER/UPS TO CARRY For YOUR LOAD To do that you will need to know first the total load in your house. Supposed you have: 1. TV 50"....60w 2. Decoder ...25w 3.fan 62".....80w 4. 10 lights each 25w.x10=250w
Total power ...415w What is the capacity of ups/inverter to carry the load (415w)
We divide the the power load (415w) by one of the standardd power factor (0.8, 0.7,0.6) That will give us ...415/0.7 =519va
Therefore we will need 600va or 650va inverter/ups to carry the load.
Note that It is recommended to chose inverter/ ups bigger than the one we need.
HOW TO CALCULATE BATTERY BACKUP TIME. supposed we have 2 batteries of 200ah/12v and a total load 415w. How many hours will the battery last?
Firstly multiply the battery voltage by the amp hour. 200ah x 12v =2400wh x2 =4800wh Divide by the load ..4800wh/415w =11hrs.5min
Our backup time will 11hrs.5min but due to the battery can not drop to 0% to prolong the battery lifesspan we will maintain the battery DOD to 50% that will give us 6hrs.
HOE TO CALCULATE INVERTER /UPS CHARGING CURRENT.
Firstly find out the inverter vdc(voltage direct current) which is usually ranges from 12vdc-180vdc above
If my inverter/ ups is a 12v ( that is for one 12v battery) the charging current will be 10% of the battery ah. That is 10/100 =0.1 0.1x 200 = 20a.. Therefore a 12v inverter of any given capacity charging 200ah battery has about 20a charging current.
HOW TO CALCULATE CHARGING TIME that will be battery ah divide by charging current.
200ah/20a = 10hrs
HOW TO CALCULATE NO OF SOLAR PANEL FOR YOUR BATTERY suppose you have one 200ah/12v battery and u need solar to charge in the absent of power supply. It is simple. First know your battery charging current as calculated above 200ah battery charging current is 20a and the battery is 12v.
Power is v x a i.e 12 x 20 =240w
We need 240w solar panel to charge our battery Note it is recommended we use panel bigger than the one we need in this case we will need 480w panel for proper charging .
Tonytech services ltd Providing you quality services at all time
Our services includes installation, sales and maintenance of: 1 inverter 2 solar panel 3 cctv 4 electrical 5 solar street light etc 6 computer system
Call an expert today. WhatsApp 0.8.1.8.0.7.2.9.6.1.2., Call 0.7.0.1.0.4.2.3.3.3.7
Try us today |