Please can you share his contact. Need similar work done

n3xt:


When it comes to ornamental works, I’ve never seen anyone as good as Donald. Though pricey but his work are outstanding.

.

EgunMogaji2:


That’s an alarmist point of view Sir and you should know better than to say that.

Oga mi sir, encourage the profession, they study hard to get there.

femidbuilder:
Please can you share his contact. Need similar work done

@azuh

Pls kindly drop Donatus contact here. I’ve lost his contact.

Thanks.

Chekitaut:
Oga mi sir, encourage the profession, they study hard to get there.

You’re adding condescending to your portfolio too.

Is he going to draw his own plan, lay his brick, make his brick, deliver his granite, sand, drill his own borehole, etc?

This is mostly a DIY thread. That you lot have turned it into an advertising nonsense is a crying shame.

And please stop patronizing me, I’ve been here for a while and I’m immune to the smokescreen.

Enyinne:
My land is waterlogged and i used upto 5m for foundation

Abi..give estimate on how you spent 5m for foundation on waterlogged land cos you are discouraging people here. Pls house lets contribute

Amastermovic:


try the following platform out and channel..

Telegram: Search for YOUNG CIVIL Engineering Forum
2)Nice Lagos , NSE, or drop ur contact I will request for you to be added join lot of group..

LinkedIn : Those skills of yours you mention u will put it work and show the problem you are solving with it to people in same field as u ..

Thank you, I'm already on LinkedIn. I'll appreciate it too if you can add me to those groups. Here's my contact: 07032744909

n3xt:


To be honest, I think your Nigeria is kinda different.

I’ve been using automatic gate operator for almost 8 years now, the only maintenance I ever did was to change my battery.

Guess the amount. It’s just 7k!
My gatehouse is just a complete waste.

I use motion sensors too and automatic sprinklers. These things don’t just pack up. Even when they do, just go to Ogunpa market if you’re in Ibadan or Oshodi if you’re in Lagos, those guys can fix anything.


https://www.youtube.com/watch?v=vf64ChAmSvc

Please I'm interested in this. How do I get it?

Please I need top notch recommendations for artisans that can handle the following jobs:

1. Plastering
2. POP
3. Window design

I understand our brothers from Republic of Benin are skilled at these tasks. So I wouldn't mind someone from that side.

Please let me mention that I prefer to work directly with the artisans. I do not need middlemen or contractors.

Thank you

sinorte:


Please I'm interested in this. How do I get it?

Check online for Centurion Automatic Gate Operator. I know it’s everywhere now.
I’m using D5 and it should be around 300k now. I think D5 can carry up to 500kg gate.

I bought 180k about 8 years ago from Nevosys (also a nairalander) but he’s no longer in town.

I never use local gate roller installed by my welder. Nevosys gave me a very good gate roller (imported) which makes the gate operation very smooth.
My 2 year old can easily open the gate without help in manual mode.

There are other add-on modules that can be purchased at extra cost too (GSM module for remote entry, infrared beam etc).

The gate operator has a lot of features that can be set on the onboard controller using the ChronoGuard timer.

I did most of the additional stuffs myself. I just tell my electrician what to do.

The system is pretty simple to operate.

n3xt:


Check online for Centurion Automatic Gate Operator. I know it’s everywhere now.
I’m using D5 and it should be around 300k now. I think D5 can carry up to 500kg gate.

I bought 180k about 8 years ago from Nevosys (also a nairalander) but he’s no longer in town.

I never use local gate roller installed by my welder. Nevosys gave me a very good gate roller (imported) which makes the gate operation very smooth.
My 2 year old can easily open the gate without help in manual mode.

There are other add-on modules that can be purchased at extra cost too (GSM module for remote entry, infrared beam etc).

AZUH:
why did you call me chief ?

sinorte:
Please I need top notch recommendations for artisans that can handle the following jobs:

1. Plastering
2. POP
3. Window design

I understand our brothers from Republic of Benin are skilled at these tasks. So I wouldn't mind someone from that side.

Please let me mention that I prefer to work directly with the artisans. I do not need middlemen or contractors.

Thank you

Pop.. dominionng

n3xt:


Check online for Centurion Automatic Gate Operator. I know it’s everywhere now.
I’m using D5 and it should be around 300k now. I think D5 can carry up to 500kg gate.

I bought 180k about 8 years ago from Nevosys (also a nairalander) but he’s no longer in town.

I never use local gate roller installed by my welder. Nevosys gave me a very good gate roller (imported) which makes the gate operation very smooth.
My 2 year old can easily open the gate without help in manual mode.

There are other add-on modules that can be purchased at extra cost too (GSM module for remote entry, infrared beam etc).

Thank you

lol all all these new ideas are welcome.. but can we actually maintained it?
then the issue of power supply... how many of us can afford 24hours power supply ?



a lot of stuff are easier said than done.

twinskenny:
lol all all these new ideas are welcome.. but can we actually maintained it?
then the issue of power supply... how many of us can afford 24hours power supply ?



a lot of stuff are easier said than done.

What maintenance do you require for a system that uses DC?

My 12V pump has been working without issues for years.

I still don’t get the maintenance we talk about.

Do I need 24hours light to maintain a DC pump that’s connected to my inverter?

Or do I need 24hours light to run a gate operator running on 650VA UPS battery? The system runs on battery for 3 days without electricity supply mehn.

Sigh!

twinskenny:


Pop.. dominionng

I second this based on his participation on here but please do your own individual diligence.

I seldom hire from on here but I might call on him for my next jobs.

n3xt:


What maintenance do you require for a system that uses DC?

My 12V pump has been working without issues for years.

I still don’t get the maintenance we talk about.

Do I need 24hours light to maintain a DC pump that’s connected to my inverter?

Or do I need 24hours light to run a gate operator running on 650VA UPS battery? The system runs on battery for 3 days without electricity supply mehn.

Sigh!

Mehn, I am learning a lot here. I used to see this automatic gate thing as one complicated matter. I first saw it in my hall of residence in UK as a PG student in 2008.
The smaller one for pedestrian had a sensor that once you are approaching the gate, it would open. The big one had a sensor that recognizes the sensors in the windscreen of incoming cars as only those that were living in the compound are allowed to come into the compound with their cars.

Sensors were given to those big boys students with cars but for visitors cars, the gate would not open for them.

n3xt:


What maintenance do you require for a system that uses DC?

My 12V pump has been working without issues for years.

I still don’t get the maintenance we talk about.

Do I need 24hours light to maintain a DC pump that’s connected to my inverter?

Or do I need 24hours light to run a gate operator running on 650VA UPS battery? The system runs on battery for 3 days without electricity supply mehn.

Sigh!

I don’t get it either but you have to consider the audience.

I donated 4 solar street lamps to my association. When it was time to add more they went and bought regular ones and setup an actual light switch on the NEPA pole.

So months later we have new people move into the community and the complaints started that they too want the solar lights in front of their houses instead of the NEPA powered ones that’s almost always in total darkness

Me I just read the WhatsApp back and forth smiling.

Technology is out there, people need to read up on it and cuddle it.

Solar light = turns on and off automatically, never needs power from solar.

NEPA street light = need to be turned on and off, doesn’t work without NEPA power.

Upon further research I found out that the complaint was that some artisans working nearby were afraid of the solar and started spreading rumors that the solar uses human blood and destiny to work. Imagine that.

n3xt:


What maintenance do you require for a system that uses DC?

My 12V pump has been working without issues for years.

I still don’t get the maintenance we talk about.

Do I need 24hours light to maintain a DC pump that’s connected to my inverter?

Or do I need 24hours light to run a gate operator running on 650VA UPS battery? The system runs on battery for 3 days without electricity supply mehn.

Sigh!

it is what it is bro,,, no need to sugar coat what is not... and honestly i will love to pay you a visit to see how you setup this things...

and like i said, it is easier said than done

sinorte:
Please I need top notch recommendations for artisans that can handle the following jobs:

1. Plastering
2. POP
3. Window design

I understand our brothers from Republic of Benin are skilled at these tasks. So I wouldn't mind someone from that side.

Please let me mention that I prefer to work directly with the artisans. I do not need middlemen or contractors.

Thank you

Hian, you don't want contractors / middle men to chop, so if I am a contractor / middle man, it means no small change for me to eat amala, bokoto shaki and Nkwobi

EgunMogaji2:


I don’t get it either but you have to consider the audience.

I donated 4 solar street lamps to my association. When it was time to add more they went and bought regular ones and setup an actual light switch on the NEPA pole.

So months later we have new people move into the community and the complaints started that they too want the solar lights in front of their houses instead of the NEPA powered ones that’s almost always in total darkness

Me I just read the WhatsApp back and forth smiling.

Technology is out there, people need to read up on it and cuddle it.

Solar light = turns on and off automatically, never needs power from solar.

NEPA street light = need to be turned on and off, doesn’t work without NEPA power.

Upon further research I found out that the complaint was that some artisans working nearby were afraid of the solar and started spreading rumors that the solar uses human blood and destiny to work. Imagine that.

Everything I’m using for my current build is ordered from US even taps.

If it can work over there, it’ll definitely work here.

And for the records, I’ve designed a kitchen for a client here that was supplied by Wickes.

It might not work for all but there are just some people who can’t trade quality for anything.

I’m not in the class of people who’d say AKT is better than Phillips light bulb. Whatever the client wants, I encourage them to get.

n3xt:


Everything I’m using for my current build is ordered from US even taps.

If it can work over there, it’ll definitely work here.

And for the records, I’ve designed a kitchen for a client here that was supplied by Wickes.

It might not work for all but there are just some people who can’t trade quality for anything.

I’m not in the class of people who’d say AKT is better than Phillips light bulb. Whatever the client wants, I encourage them to get.

Some client doesn't like average things to be installed for then. Nobody can compare PHILIPS, THORN fittings with AKT. there is a BIG different between them . I work for a client in Akure, alagbaka area. All what he used installed is From uk. He even plan to import cables but we made him realised that Nigeria cable is far better than imported cable because of the voltage and frequency we use here.

Focusmind:

Mehn, I am learning a lot here. I used to see this automatic gate thing as one complicated matter. I first saw it in my hall of residence in UK as a PG student in 2008.
The smaller one for pedestrian had a sensor that once you are approaching the gate, it would open. The big one had a sensor that recognizes the sensors in the windscreen of incoming cars as only those that were living in the compound are allowed to come into the compound with their cars.

Sensors were given to those big boys students with cars but for visitors cars, the gate would not open for them.

Those bigger boys were holding less than $30 remote. My NOVA remote is sold 10k pere. You can even set it up for condos.

Even GSM module is just 35k.

Make I chill jare.

I honestly don’t know how some people look at us in Nigeria. We are monkeys abi?

topsy23:


Some client doesn't like average things to be installed for then. Nobody can compare PHILIPS, THORN fittings with AKT. there is a BIG different between them . I work for a client in Akure, alagbaka area. All what he used installed is From uk. He even plan to import cables but we made him realised that Nigeria cable is far better than imported cable because of the voltage and frequency we use here.

Please let us always encourage them to buy. You can always ask them to link you up with the manufacturers for installation support. That’s if you ever need one.

Well done sir.

n3xt:
I love 3D floors o but I’d rather pay more to achieve a great landscape like this.

Pics - IITA, Ibadan (2019)

This is really nice.

Did i force him to ask me the question? I hv no time for explanation for such . Different lands and different cost . People use 1m and upto 10m to do foundation and i hv seen one before . He knows his land better than me as for me that is my cost . Let him check with his engineer and can i know what u what the house to contribute to ? How i spent my money ? Your funny

kingzsoul:


Abi..give estimate on how you spent 5m for foundation on waterlogged land cos you are discouraging people here. Pls house lets contribute

kingzsoul:

Abi..give estimate on how you spent 5m for foundation on waterlogged land cos you are discouraging people here. Pls house lets contribute

How is the lady discouraging people?
The OP asked a general question and the lady gave her the specific money she spent on her waterlogged foundation that she recently done and you are saying the above?
Dont you know foundation comes in various types based on the soil condition. What did you contributed to the OP's question?

Hajji M.

Oga , Your not an engineer and knows nothing about building. Always responding sarcastically when people says there cost . Always believe the cost spent on building esp foundation as cost is variable and all land conditions are not same .Respectable member here gave me a quote of 12.7m to erect from foundation to decking without his professional fee .When I received it , i doubted it and decided to buy all materials by myself and labour as i was feeling his quotation was much but i must confess i hv spent very very closely to that amount to achieve foundation to decking . So mind ur language at times as meself no get joy now .

Chekitaut:
5ft or 5m? 5m is 15ft

Enyinne:
Oga , Your not an engineer and knows nothing about building. Always responding sarcastically when people says there cost . Always believe the cost spent on building esp foundation as cost is variable and all land conditions are not same .Respectable member here gave me a quote of 12.7m to erect from foundation to decking without his professional fee .When I received it , i doubted it and decided to buy all materials by myself and labour as i was feeling his quotation was much but i must confess i hv spent very very closely to that amount to achieve foundation to decking . So mind ur language at times as meself no get joy now .

Madam no offence. Dont take it personal.

mufutau55:


How is the lady discouraging people?
The OP asked a general question and the lady gave her the specific money she spent on her waterlogged foundation that she recently done and you are saying the above?
Dont you know foundation comes in various types based on the soil condition. What did you contributed to the OP's question?

Hajji M.

Sorry hajji