Generator Difficult To Pull, Becomes Easy When Plug Is Removed - Car Talk - Nairaland
Nairaland Forum › Nairaland General › Car Talk › Generator Difficult To Pull, Becomes Easy When Plug Is Removed (6761 Views)
| Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Ayemileto(op): 1:26pm On Sep 05, 2020 |
Good day everyone. My Tiger generator (the medium yellow type with big coil) has refused to start up. The battery is damaged, so I have to pull manually. From what I notice, it is very difficult to pull, but once I remove the spark plug it becomes very easy. Immediately I connect the spark plug back, it becomes difficult once again. I read online that it's a simple issue, and tried some solutions suggested but it didn't work out. I know we have experienced people here who can provide me with vital information on what is wrong and the solution, and I will really appreciate it. Thanks in advance. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by KristaPretty(f): 1:33pm On Sep 05, 2020 |
Good day, https://www.justanswer.com/small-engine/an4qj-hard-pull-rope-generator-tried-pulling-without.html This is where I get help to all my generator issues. I can't remember calling the repairer for a long time now ![]() |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Ayemileto(op): 1:40pm On Sep 05, 2020 |
KristaPretty:Ok, I will check it out. thank you. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by adanny01(m): 6:14pm On Sep 05, 2020 |
Ayemileto:Valve timing issue. A good Gen Mechanic should know what to do. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Ayemileto(op): 6:31pm On Sep 05, 2020 |
adanny01:Thanks bro. But i adjusted the valves yesterday, after which it worked for sometime before stopping. Although I noticed the valves don't press down as they should. But if I make the valves any tighter (so the valves can press down more), there won't be any clearance where necessary. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Zane2point4(m): 3:30am On Sep 06, 2020 |
You hv a broken crank shaft ,there's this spring that normally breaks in them,change it its 1500. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Ayemileto(op): 7:46am On Sep 06, 2020 |
Zane2point4:Ok bro. Thank you. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by Nobody: 7:30am On Sep 08, 2020 |
Sell the Gen. And buy a generator |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by bluefilm: 8:57am On May 09, 2021 |
KristaPretty:Thanks a lot for sharing. I want to start to stop calling my repairers too. ![]() |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by baconline(m): 3:48pm On May 09, 2021 |
Had the same problem, the ignition is too high,reduce it |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by EYESofHORUS: 5:01pm On Sep 18, 2021 |
baconline:Hello bacoline, please explain what you mean by Ignition been too high. I am having same problem here. Thanks in advance. |
| Re: Generator Difficult To Pull, Becomes Easy When Plug Is Removed by MARKone(m): 8:06pm On Sep 18, 2021 |
EYESofHORUS:Scan the generator first, post error code here. |
How A Huge Snake Was Removed From A Car Wheel (video) • 5 Major Reason Why It's Difficult To Rotate A Steering Wheel • Man Uses A Rope To Pull A Faulty Car In Benin, Edo State • 2 • 3 • 4
2006-2010 ML 350 OR 2008-2010 MDX • The Comprehensive List Of 188 Drivers License Centers In Nigeria And Address • Is Golf 4 (manual Gear) A Good Buy?

