₦airaland Forum

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.
Oven bake technology have extraction systems and filters, which remove atomized spray from the air. This creates a clean, dust- free environment with reduced overspray. The extraction system also creates a seal around the doors of the paint booth so that dust and other particles that might be found in a typical traditional workshop cannot enter the spraying area while work is in progress. If a job is sprayed in traditional workshop conditions, dust can contaminate the paint and ruin the integrity of your work.

2. Oven bake technology create an ambient spraying temperature of approximately 64 to 70 degrees Fahrenheit. In a traditional workshop, the spraying temperature is dependent on the local climate or heating systems and this makes it more difficult to maintain optimum spraying temperatures. Professional paints are sprayed at paint booth temperatures so that a wet, even application of color can be achieved. If a job is painted in a traditional workshop in conditions that are too warm, dry patches in the paint occur. If the temperature is too cold, paint will not cure quickly enough and this causes it to run or sag.

3. Modern paint materials use hardeners and reducers that are designed to dry at low-bake temperatures of 160 to 175 degrees Fahrenheit. Most paints dry within 30 minutes if they are exposed to the baking temperatures inside a paint booth. When a vehicle is painted and left to dry in normal traditional workshop conditions, solvents remain inactive underneath the final coat of color and this slows down the drying process. If paint isn't fully dry when a job is unmasked or polished, tearing occurs and this results in the vehicle having to be prepared and painted a second time.

4. Health and Environmental Issues The extraction system in Oven booths reduces the amount of volatile organic compounds that are released into the atmosphere. Once a coat of paint has been applied, operatives can usually return to the paint booth without respiratory equipment within three minutes. In a traditional workshop environment, it can often take hours for overspray to clear. This increases the risk of breathing in harmful polyisocyanate materials for other workers and increases the level of VOC emissions (Volatile organic compound). This presents a significant risk to the surrounding environment and violates current health and safety legislation. Thank You And Have a Pleasant Afternoon. Note. When coming ensure that you call me, so that i would be on ground to access your car personally and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you

pix

After.








Pix

pix

Thank you Mr Ben. We appreciate your patronage.






Before.

Good Morning People.

Enquiries

.

We offer dependable, affordable quality, give us a call today. 08024246344

Congratulations Nigeria. Super Eagles made us proud this evening. Good Night Nairalanders.

.

Our Address is Plot 105 Babs Animashaun Road, Mechanic Village, Surulere, Lagos. 08024246344
Mr Sylva

Wishing you all a blessed Sunday.

Good Night Everyone.

.

08024246344

Oven Bake your vehicle with us today. Let's offer you a great customer satisfaction.

Our Address is Plot 105 Babs Animashaun Road, Mechanic Village, Surulere, Lagos. 08024246344

Enquiries

Happy Weekend Everyone

At Quality Oven Bake Ltd we know that it takes something extra, something genuine to step to the forefront of the industry and then hold that position and we are not ready to relinquish that position. Good morning to you all.

Good night you all.

08024246344

Thank you Mr Kaybell. We appreciate your patronage.

It takes more than leadership, focus and dedication to stay ahead in the competitive world of spray booths and finishing systems. At Quality Oven Baking Ltd we pride ourselves among the best.

Don't leave your car unattended, at Quality Oven Baking Ltd we give your car that distinctive image it deserve.

Bake your vehicle with us today and get value

.

Our Address is Plot 105 Babs Animashaun Road, Mechanic Village, Surulere, Lagos. 08024246344

pix.

pix

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.

Oven bake technology have extraction systems and filters, which remove atomized spray from the air. This creates a clean, dust- free environment with reduced overspray. The extraction system also creates a seal around the doors of the paint booth so that dust and other particles that might be found in a typical traditional workshop cannot enter the spraying area while work is in progress. If a job is sprayed in traditional workshop conditions, dust can contaminate the paint and ruin the integrity of your work.

2. Oven bake technology create an ambient spraying temperature of approximately 64 to 70 degrees Fahrenheit. In a traditional workshop, the spraying temperature is dependent on the local climate or heating systems and this makes it more difficult to maintain optimum spraying temperatures. Professional paints are sprayed at paint booth temperatures so that a wet, even application of color can be achieved. If a job is painted in a traditional workshop in conditions that are too warm, dry patches in the paint occur. If the temperature is too cold, paint will not cure quickly enough and this causes it to run or sag.

3. Modern paint materials use hardeners and reducers that are designed to dry at low-bake temperatures of 160 to 175 degrees Fahrenheit. Most paints dry within 30 minutes if they are exposed to the baking temperatures inside a paint booth. When a vehicle is painted and left to dry in normal traditional workshop conditions, solvents remain inactive underneath the final coat of color and this slows down the drying process. If paint isn't fully dry when a job is unmasked or polished, tearing occurs and this results in the vehicle having to be prepared and painted a second time.

4. Health and Environmental Issues The extraction system in Oven booths reduces the amount of volatile organic compounds that are released into the atmosphere. Once a coat of paint has been applied, operatives can usually return to the paint booth without respiratory equipment within three minutes. In a traditional workshop environment, it can often take hours for overspray to clear. This increases the risk of breathing in harmful polyisocyanate materials for other workers and increases the level of VOC emissions (Volatile organic compound). This presents a significant risk to the surrounding environment and violates current health and safety legislation. Thank You And Have a Pleasant Afternoon Sir.

Note. When coming ensure that you call me, so that i would be on ground to access your car personally and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you