₦airaland Forum

.

Don't leave your car unattended, at Quality Oven Baking Ltd we give your car that distinctive image it deserve.

Quality Oven Bake Ltd

Thank you Mrs Funmi. We sincerely appreciate your patronage.

08024246344

Enquiries

DON FASZY: Hw much will it cost to touch

Nissan quest 05 two side body and front n back bumper

U wil do small panel beatin

It would be better you do a full body re-spray and panel beating on you vehicle. Working on the two side body and front & back bumpers, that leaves only the top of the vehicle ok. This particular paint job is practically a full body re-spray. My candid opinion is for you to oven bake your vehicle completely or bring it to my office for me to access it. Thank you.

We take into consideration performance factors such as gloss, depth of image, ease of polishing, hardness and longevity are some of the key factors we guarantee.

For those that don't have chance or the luxury of time due to the nature of their work/job or won't be able to locate our office easily, our driver's are always available to assist you.


NOTE. When coming ensure that you call me, so that i would be on ground personally to access your car and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you.

Plot 105 Babs Animashaun Road, Mechanic Village, Surulere, Lagos. 08024246344

We are here to serve you better.

.

08024246344

Good Morning

Enquiries

At Quality Oven Bake Ltd we know that it takes something extra, something genuine to step to the forefront of the industry and then hold that position and we are not ready to relinquish that position.

Enquiries

08024246344.

08024246344

Good Night People.

Enquiries.

Wishing You All A Blessed Sunday.

Good Evening People

ajgrill: I have a bmw 525 that needs a complete respray. How much would it cost and how long would it take.

It will cost you =N=55,000. The amount covers both Oven baking of your car and the necessary body works involve on it. We are also going to work on your alloy wheels, back light, head lamps. It will take us 48hrs/maximum 3days to be through with your work. Thank you.

ADVANTAGES OF USING OVEN BAKE TECHNOLOGY.

Oven bake technology have extraction systems and filters, which remove atomized spray from the air. This creates a clean, dust- free environment with reduced overspray. The extraction system also creates a seal around the doors of the paint booth so that dust and other particles that might be found in a typical traditional workshop cannot enter the spraying area while work is in progress. If a job is sprayed in traditional workshop conditions, dust can contaminate the paint and ruin the integrity of your work.

2. Oven bake technology create an ambient spraying temperature of approximately 64 to 70 degrees Fahrenheit. In a traditional workshop, the spraying temperature is dependent on the local climate or heating systems and this makes it more difficult to maintain optimum spraying temperatures. Professional paints are sprayed at paint booth temperatures so that a wet, even application of color can be achieved. If a job is painted in a traditional workshop in conditions that are too warm, dry patches in the paint occur. If the temperature is too cold, paint will not cure quickly enough and this causes it to run or sag.

3. Modern paint materials use hardeners and reducers that are designed to dry at low-bake temperatures of 160 to 175 degrees Fahrenheit. Most paints dry within 30 minutes if they are exposed to the baking temperatures inside a paint booth. When a vehicle is painted and left to dry in normal traditional workshop conditions, solvents remain inactive underneath the final coat of color and this slows down the drying process. If paint isn't fully dry when a job is unmasked or polished, tearing occurs and this results in the vehicle having to be prepared and painted a second time.

4. Health and Environmental Issues The extraction system in Oven booths reduces the amount of volatile organic compounds that are released into the atmosphere. Once a coat of paint has been applied, operatives can usually return to the paint booth without respiratory equipment within three minutes. In a traditional workshop environment, it can often take hours for overspray to clear. This increases the risk of breathing in harmful polyisocyanate materials for other workers and increases the level of VOC emissions (Volatile organic compound). This presents a significant risk to the surrounding environment and violates current health and safety legislation.

Thank You And Have a Pleasant Afternoon Sir. Note. When coming ensure that you call me, so that i would be on ground to access your car personally and for work to start immediately your car arrive or rather call me on 08024246344 to book an appointment. Thank you

Happy Weekend Everyone

Good Evening People

We offer the best in modern automotive finishes.

bong4: Nice testimony you have going here. Please and please, keep it up. I stay in Ile Ife.

Thank you for the compliment

bong4: Good Day Chief, Are you on whatsapp.? I can send you pix of my car (mercedes 190) with minimal body work to be done for your assessment. Nice testimony you have going here. Please and please, keep it up. I stay in Ile Ife.

Here is my E-mail address: quality.ovenbaking@yahoo.com

bLacK GoLd: I am sorry i reacted too rashly.

Apology Accepted.

08024246344