₦airaland Forum

Ikenna351:
What you have is Oil temperature and oil level sensor, because the sensor does dual work, since yours is EW engine (even if you don't have oil temperature gauge on instrument panel).

You will find these 3 codes/numbers on the 3 wires: 414, 411 & 415. These numbers are stamped on the wires.

The connector I also numbered: 1,2 & 3. The connection on the connector should be like this:

Pin 1: 414 (Green).

Pin 3: 411 (Red).

Pin 4: 415 (White).



* The pin 1 should be the ground, meaning, it will either be green or green with yellow stripe colour.

I believe this will help. If you still can't connect it and you stay in Abuja, bring it to me.

Ikenna

Am in Enugu rite now but will be back soon; however, is d pin 1 to be inserted starting from d left or from d rite with respect to the female socket on d oil pan?

Afternoon guys, just joined this forum and am hoping to be helped. The oil level sensor cable for my 406 prestige EW10 engine got disconnected from the level sensor (located at the oil pan - called bottom plate), as a result the male socket got broken and left the cable hanging.
Three cables with colours - yellow, red and white; now have gotten another socket (not the exact, but a fitting male socket)but I don't know how to have the cables connected in the right way. Tangible response will be highly appreciated