₦airaland Forum

Welcome, Guest: Register • Login • With Google • Trending • Recent • New

Stats: 3,345,770 members, 8,519,370 topics. Date: Monday, 16 November 2026 at 07:55 AM

Toggle theme

StrangeAngel's Posts

Nairaland Forum › StrangeAngel's Profile › StrangeAngel's Posts

1 (of 1 pages)

Car Talk › Re: The HONDA Club by StrangeAngel: 9:30am On Oct 15
Igemburg:
So I just got this Honda Accord 2014 model

Ride is smooth

The only issue I have is vibration at idle

*Engine mounts changed
*Plugs, air filter, injectors serviced
And still vibrates at idle, but when on motion it moves smoothly

Rewire told me issue is from engine, but car moves smoothly in motion
Who can recommend an expert Honda technician that can solve this
does the vibration come with the rpm needle constantly searching for a balance?
also what's the rpm on idle
do you experience this on a cold start or even when the engine is running at operating temp.
Car Talk › Re: The HONDA Club by StrangeAngel: 9:26am On Oct 15
Cryomancer:
The issues with this car is much.... didn't you scan it before buying the carhuh.

Anyway I don't know any specialists in ilorin, but my guess is that you bought that car from someone that also resides in ilorin, which says a lot about the codes that you have on the car.

Anyway my best advice is to bring that car to Lagos where there are lots of Honda specialists in oyingbo and dedicate a weekend to fixing all these issues because there's no way you can enjoy that car with all those codes, and the more you give the car to inexperienced mechanics in ilorin, the more complicated the car issues becomes.

This is just my personal advice.
I am returning the car, the issues with it is much more, it is burning way too much fuel for an i4
Car Talk › Re: The HONDA Club by StrangeAngel: 9:25am On Oct 15
MOTIONTECH:
Hi, goodmorning, have you tried to clear the code?
yes, I eventually got it cleared however it is burning fuel like a lot, I will be returning it to the dealer.
Car Talk › Re: The HONDA Club by StrangeAngel: 7:36pm On Aug 14
honda family, I recently purchased a nigerian used 2012 accord and I need a knowledgeable mechanic and rewire in Kwara area, please share any of the ones you have, I have used 2 mechanics to replace brake fluid and they both botched it, first one used fake brake fluid(basically water) and the second one does not know how to properly bleed the existing fluid enough for the new one to completely fill the entire brake line, now I am sure I have air bubbles in the brake line. It has early sharp grip, mid sponge like and late sharp grip, then when the car finally stops, the car does a final bump forward as if its been hit by a vehicle, also the brake light on the dash is on. I have a bluetooth OBD scanner and these are the codes I get:

Car Scanner ELM OBD2
Version: 2.1.46/2.1.46/iOS
DTC report
Connection profile: Honda Accord, Civic, CRV, CX-7 etc. 2008-2012 (var.1)Date: 8/10/2026 4:42:57 PM
============================
OBD-IIOBD-II
DTCs: 17
----------------------------
P0339 [0x0339]
Crankshaft position (CKP) sensor - circuit intermittent
Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption
Status: Confirmed
----------------------------
P0325 [0x0325]
Knock sensor (KS) 1, bank 1 - circuit malfunction
Knock Sensor Circuit Malfunction
Status: Confirmed
----------------------------
P0302 [0x0302]
Cylinder 2 - misfire detected
No. 2 Cylinder Misfire
Status: Confirmed
----------------------------
P0303 [0x0303]
Cylinder 3 - misfire detected
No. 3 Cylinder Misfire
Status: Confirmed
----------------------------
P0300 [0x0300]
Random/multiple cylinder(s) - misfire detected
Random Misfire
Status: Confirmed
----------------------------
P2185 [0x2185]
Engine coolant temperature (ECT) sensor 2 - circuit high
Status: Confirmed
----------------------------
P2654 [0x2654]
Rocker arm actuator B, bank 1 - circuit high
Status: Confirmed
----------------------------
P2270 [0x2270] Archive (inactive)
Heated oxygen sensor (HO2S) 2, bank 1 - signal stuck lean
Status: Permanent
----------------------------
C1555(55) [0x555555]
Status: Test failed, Pending, Test not completed since last DTC clear, Test not completed during this operation cycle
----------------------------
P0339(00) [0x033900] Archive (inactive)
Crankshaft position (CKP) sensor - circuit intermittent
Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P0325(00) [0x032500]
Knock sensor (KS) 1, bank 1 - circuit malfunction
Knock Sensor Circuit Malfunction
Status: Pending, Confirmed, Test not completed during this operation cycle, Warning indicator requested
----------------------------
P0302(00) [0x030200] Archive (inactive)
Cylinder 2 - misfire detected
No. 2 Cylinder Misfire
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P0303(00) [0x030300] Archive (inactive)
Cylinder 3 - misfire detected
No. 3 Cylinder Misfire
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P0300(00) [0x030000] Archive (inactive)
Random/multiple cylinder(s) - misfire detected
Random Misfire
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P2185(00) [0x218500]
Engine coolant temperature (ECT) sensor 2 - circuit high
Status: Test failed (current drive cycle), Pending, Confirmed, Warning indicator requested
----------------------------
P0533(00) [0x053300]
AC refrigerant pressure sensor - high input
Status: Pending, Confirmed, Test not completed during this operation cycle
----------------------------
P2654(00) [0x265400]
Rocker arm actuator B, bank 1 - circuit high
Status: Test failed (current drive cycle), Pending, Confirmed, Warning indicator requested
============================
Engine #3Engine #3
DTCs: 9
----------------------------
P0339(00) [0x033900] Archive (inactive)
Crankshaft position (CKP) sensor - circuit intermittent
Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P0325(00) [0x032500]
Knock sensor (KS) 1, bank 1 - circuit malfunction
Knock Sensor Circuit Malfunction
Status: Pending, Confirmed, Test not completed during this operation cycle, Warning indicator requested
----------------------------
P0300(00) [0x030000] Archive (inactive)
Random/multiple cylinder(s) - misfire detected
Random Misfire
Status: Confirmed, Test not completed during this operation cycle
----------------------------
P2185(00) [0x218500]
Engine coolant temperature (ECT) sensor 2 - circuit high
Status: Test failed (current drive cycle), Pending, Confirmed, Warning indicator requested
----------------------------
P0533(00) [0x053300]
AC refrigerant pressure sensor - high input
Status: Pending, Confirmed, Test not completed during this operation cycle
----------------------------
P2654(00) [0x265400]
Rocker arm actuator B, bank 1 - circuit high
Status: Test failed (current drive cycle), Pending, Confirmed, Warning indicator requested
----------------------------
C1555(55) [0x555555]
Status: Test failed, Pending, Test not completed since last DTC clear, Test not completed during this operation cycle

I am yet to do an engine oil change but I was told the engine has recently been replaced. The trac off light is also on.

1 (of 1 pages)