₦airaland Forum

FriendsAndFans:
Since it's not the main entrance, that current height is good

what about the subject of the thread. Safe to do it or not?

rickpat:
Okay,i saw it has been dressed already thsts why i thought you wont be putting a door there. ...for the reinforcement part,if you want to put reinforcement,the reinforcement wont align with the lintel level again,it will be higher than the lintel level,mehn the engineer made a big mistake.. .just reinforce it even if the level wont be same with the lintel,reinforce it anyhow because of the door you intend to put there...use small stones with enough cement for the mix for strength cus that particular part wont be chained to the lintel anymore

yes i dressed it already cos the glass door wont need cement work. Anyways, just wanted to know if it is safe to proceed with increasing the height cos the concrete slab behind and in front of the door is a “flat plate slab” up to 20x20 meter wide

FriendsAndFans:
I thought the door height is supposed to be higher than the windows if it's the main entrance...
So that when bringing in huge things, it will enter easily

The door is currently 7ft x 4ft. But for aesthetics purpose, i prefer 8ft height.. i was even going to ignore it until i noticed the window is higher than the door and that alone has spoilt my design aesthetic plan so i need to know if it is safe to increase the door height.. and the door is an entrance to the dinning and not the main entrance to the foyer.

rickpat:
If you crack a little to see if the reinforcement has any space above the door level,you can crack further...but if the reinforcement sits on the exact height of the door with no space,just leave it...cus the lintel is chained except you want to crack it,then cut off the reinforcement,increase the height of the door,then filled it up with concrete without reinforcement then dress when the door is installed but I zoomed and saw you dont even need a door in that place....so just fill and dress it back

the reinforcement sits on the exact height of the door. You said you zoomed and noticed i don’t even need a door there. Hmm , why do you say so? Cos I intended putting a steel glass door there. And why would you prefer after cutting the reinforcement, i only dress it back with cement and not reinforcing it again?

2 questions!

Hello everyone, i just noticed my engineer made a huge mistake of not making the door height to align with the window height. But now I am considering increasing the door height to 8ft and this would also make it stand same height with the window but the issue is that there is a concrete slab above it. What is the safest way to go about this? How do i save cost and Is it safe to avoid structural issues?

ayoncox:
How did it go eventually

provision business is a very bad business. Spent 7mil back then and she’s back to square zero. Never again!

Still available

Available now

Available

Serious buyer only

Available

Any lucky buyer?

Available for potential buyers

Come for inspection

Available

Available for inspection

Available

Still very much Available

Available

Happy new week

Happy new week

Who will be the lucky owner?

zoghys:
.

Your WhatsApp number

0901 065 2352

Still available for a serious buyer

lekkys:
send me the car pictures on 08134558783

check my profile. I posted the car on the 3rd thread

Available

notobiafrababe:
Secondly most car sellers here are very greedy. Someone will buy a car for about two million and after about several years of usage would want to see for 6.5 million. Una just come here place crazy prixe tags

I am not a car dealer o.. check how much my car is being sold for as tokunbo even as used then u will know it is truly a distress sale price I am offering. Find me buyer and have a cut

notobiafrababe:
Where is the car. At least upload the pix

check my third topic on my profile. Its the only car i have advertised here.

Attachments: (maximum size: 4MB for pictures and 250kB for other files)

Very available

Send a dm for negotiation

Jiggymania:
No pictures?

pictures are there. Or simply message the mobile number there on WhatsApp if you are interested