Topper33's Posts
Nairaland Forum › Topper33's Profile › Topper33's Posts
1 (of 1 pages)
There is Checked and it was a hardware issue Penuelseun: |
Thanks alot dollarnaira: |
Hello My people Please I discovered that my Inverter (itel hybrid 3.6kva) no longer charges from the grid. When ever I turn on the breaker, I get error 3 and the inverter stops. From the manual, it states the error is Bus Voltage Low This occurs only when I turn on the grid breaker while attempting to charge. Charging from the panel is working fine Please can this be fixed or where can I take it to for repairs... Would appreciate feedback based on your experience.... Thanks
|
Is there free trial? What is your fee |
Many thanks Sir CuteMaro: |
Well, your thoughts sha SourYoghurt: |
Guys, Please what are your take on this: So i have been following this tread for some time and from poplular recommendations to others , I was convinced and then I ordered and received a 3.2kwh battery from a buider on this forum. The delivery was fast, no delays. Although the set did not come with any accessories, no baterries cable etc . This was as stated by the builder. ....(only the battery box in a plastic build with a small bms screen and a button). All as advertised. So no issues there. This setup cost #550k (delivery inclusive). All i got in addition was the waybill receipt The truth is, my friend who ordered for a 26.5v(100Ah) itel 2.5kwh battery, received theirs yesterday: To my supprise, the itel battery Bank alone was 2.5 to 3 times heavier than mine, the setup was built in a solid steel housing case, has 3 internet communication ports, and 3 other advanced looking ports. Came with ALL the comm ports cables, also came with two 20 mm solid +/- battery cables , 3 year warrenty card, thick steel wall brackets, metallic wall screws, some addtional bolts and nuts and many more. And all this cost #481k (including delivery fee). Now I know why people crave the itel battery pack. Although I have to say I over expected much for mine, but the person i bought mine from did not give me the kind of attention(as a first time customer as i would have wanted) the response sometimes was quite slow (had to literally push for any information with response coming anything it comes) no step by step on how to do much. I had to ask about value to set for bulk and float etc, Had to push and ask or most times google some stuff on my own. (I am not saying the seller did anything wrong o) but sincerly I dont think I may patronise the person in the future.I like my business partners to be approacheable irrespective of the value or amount involved in the trade......(my choice) So, the itel on the other had virtually a full hands on manual that explains EVERYTHING you can do, clearly defined warranty card and many more quality of life stuffs you know..... Although, I for one became a bit skeptical about the build i received (when i recall the itel heavy weight and quality) but everytime i checked the jk bms app, i showed all the cells adds up to 3.2kwh (see image). Even still, my mind still tells me I should have gone with the Itel due to its solid built, wall handing capability, solid customer and aftersales support, the quality of work and support it has. (I thought going for "3.2kwh" was better than "2.5kwh" so i had to stop my initial itel order for the local build). Its well sha Forgive me for my long epistle...Just wanted to air my thoughts man. Thanks Guys
|
Please can anyone assist with the basic price for the following: Panel: 600+ or 700+ Charger controller: 60A or higher. Make i get idea before entering the market abeg Thanks |
iraybuju: |
adimx: |
Darey00:Thank you Sir I think the Sako setup is looking good. Although the total cost is slight above my budget Asides, these, do i need any other thing? |
Unfaized:Thank you - My load could intertwine between 200 to 600 watts at working hours |
Hi Guys... Please I need your help with a couple of thoughts: My budget is 800k and I would like to get an Inverter setup. At the moment, my landlord does not permit Panel installment on his roof so I am stuck with just the grid. Please honestly, what can I get with this budget interms of LiFePO4 inverter and battery setup solely being charged from the grid(for now) You thoughts and honest recommendations would be highly appreciated I am open to suggestions.. Thanks FAM |
1 (of 1 pages)