₦airaland Forum

On today tutorial i will be showing you how too use copyright video and Monetize on YouTube
note that it’s not all YouTube video you can monetize without the copyright from the owner
but there are others which can be use and monetize, you can also use a copyright music too





https://www.youtube.com/watch?v=9PZ2Xd74-bU

How To Increase google Adsense CPC/ Cost Per Click for Youtube and Website 2016



This tutorial will cover for both youtube and Website ads

Before i begin, You need to have a verified google adsense account for youtube or website but for this video i will be using a Youtube verified account



Incase you want to sign up visit www.google.com/adsense

The purpose of the tutorial is to help you earn more from your adsense account has majority of ads on google adsense pays low amount for CPC



I have more than 40 high paying CPC ads company i will verify some for you in this video lets begin…..


Click on Allow and Block

You can see there are over 2000 advertiser that i will show you how much they pay per click with a website i use



The website we are using is www.keywordspy.com


High payinc CPC : http:///1fTlxA



1 0.5

2 0.5

3 0.5

4 0.5

5 0.5


virtually you can’t earn more if you know this high paying CPC



1 2.90

2 1.45


3 1.16


4 1.29

5 0. 47

6 1.04


7 2.84

8 1.28

9 0.86

10 1.26


next is how to block the low paying CPC in the first place all will be enabled you need to block all

you can see all is block and non is highlighted so lets highlight the high paying CPC

You can continue until you finish



Pls like and Share if you find the tutorial helpful also subscribe for more awesome tutorial



https://www.youtube.com/watch?v=2aODpOU-92o

How to remove iCloud from and Turn of Fine My iPhone iOS 10 like iPhone iPad and iPod Torch ,

Before i proceed this tutorial is for educational propose especially those that forget there iCloud information and those that bought used iOS device without the user signing out of the iCloud account


This tutorial has not been tried on other iOS version but it works perfectly on iOS 10


Note that the device must be activated already not an erased device, Testing propose make a back up of your device


Read more : http://mobileinfosite.org/how-to-remove-icloud-from-ios-10/

https://www.youtube.com/watch?v=TwFurl4eVlg







Before you proceed make sure you back up your data to avoid data because

I will not be responsible for your lost information because it will erase all data on the phone

This method can also be apply for other Samsung device like the Note7, s6 edge, Note 5, S5 and others

Download the latest drivers , Samsung s6 firmware file and Odin software extract Odin

Requirement

Latest Samsung :Driverhttp://developer.samsung.com/technical-doc/view.do?v=T000000117
Usb caple
Firmware file : http://www.sammobile.com/firmwares/database/SM-G920F/
Pc
Odin software : http://www.needrom.com/wp-content/uploads/2015/12/Odin3_v3.10.7.zip
Samsung device




Power off the phone and enter the download mode by holding home button +volume down button and power button at the same,

then use the volume up button to continue then an Android I con will pop up with download below it.

Extract the Samsung s6 flashing firmware which comes in zip format then you will see a file with .m5d format in the folder

Open Odin and click on PDA

and navigate to the s6 folder extracted chose the .md5 file

Connect usb cable to the PC and wait for it to discover the usb driver,

Odin will indicate by a light blue bar if it detect the phone
Click on start and let Odin do its job

Comment below with your model and country remove the phone battery to see those info

and request for your Samsung firmware and I will post the link here for you



Samsung Flashing with odin
how to flash samsung
how to flash samsung mobile phone

Download Flashing
samsung mobile flashing software free download

Flashing Software
samsung flashing software, samsung usb flashing

Flashing Tool
samsung usb flashing tool, samsung online flashing


Flashing Samsung
samsung e2252 flashing, samsung phone flashing

samsung flashing tool without box free download



download samsung flashing |software Samsung Phone |how to flash samsung phone | how to flash | Mobile Solution

-~-~~-~~~-~~-~-
Please watch: "Windows Tablet Hard Reset"

https://www.youtube.com/watch?v=sfrcggszPw8
-~-~~-~~~-~~-~-

https://www.youtube.com/watch?v=sfrcggszPw8


Leave comment below

Injoo Leap Hard Reset for all injoo device easy tutorial



As you all know all the injoo leap spec are mini window tablet, with this tutorial you can hard rest any window tablet by using my step by step tutorial Injoo Leap Hard Reset







A client of my brought me this injoo leap 2 with a lock screen password which she forgot, i tried the normal combination of Volume up, Volume down and power which has always been effective all other device hard reset. which i later come to a conclusion from my research that the phone is a mini window PC with 8.1 window operating system.hard reset wont work except i can get to the recovery.





Requirements





Make sure your Injoo Leap device is full charge the power the device and wait for it to show the sign in which you don't have the password try to sign in, the key pad will pop up with 2 small icon above the keyboard see image below


http://mobileinfosite.org/injoo-leap-hard-reset/

https://www.youtube.com/watch?v=L2KeEK3OL2Q

Before i proceed note that Dell venue 7 is of two types wifi and the other is wifi + Lte

the tutorial work for both tab but the file is different the kernel will help you differentiate between them, Note before following Dell venue 7 firmware and flashing tutorial for Dell Venue7 3740 Wifi+ /Venue8 3840 Wifi+ Lite tablet



Requirements

PC
Sd card of 1GB or higher
Disable antivirus software before intalling softwares
Winrar or winzip you can search for it on google




Download and install the following tools

IntelAndroidDrvsetup
:https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices





P708T_dRIVER_V1.0.0.MSI
iSOCusb-Driverb setup-1.0..zip
xFSTK_downloader_1.5.1.zip download all this file except IntelAndroidDrvsetup because its a corrupt file

http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/FlashTool/







Download Firmware here http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/A195/Unbrick/ Note that YTD802A519500-2014-07-16-16.tgz is for wifi/lite YTP802A119500-2014-07-16-22.tgz is for wifi only







extract the firmware and Open Flash Tool ìxFSTK-Downloaderî, and set configuration for each s dection then Select the second ìMRD AO/BO + MOOR AO + CRCî tab as the following

Tap option from the upper menu from download option tick enable and set GP Flag to 0x80000007 then click ok see image below



Dell venue 7 firmware and flashing tutorial





Select Firmware files as the following from SW Image directory: FW DnX= dnx_fwr_PRQ.bin IFWI= for_product_ifwi_PRQ.bin OS DnX= dnx_osr_PRQ.bin OS Image= droidboot.img.POS.bin
see image below





Dell venue 7 firmware and flashing tutorial



Power off the tablet device (long press power key for more than 15 seconds, Click Begin Download in Flash Tool, it will display waiting time is 60 seconds then long press the volume up button and then plug in the cable



When flash process started, then release the volume up button wait till firmware flash is done, Flash Tool will show Success: FW+OS Download Completed see image bellow





Dell venue 7 firmware and flashing tutorial

After flashing firmware, the tablet device will switch to fastboot mode automatically as seen in the image below

Read more http://mobileinfosite.org/dell-venue-7-firmware-flashing-tutorial/

Am doing this video for those buying used iPhone from either ebay or from other store

Following below Video Tutorial will help you avoid buying Icloud Lock device, Telephone Technical Support: Expired Repairs & Service Coverage

with just use of Imei and Seria Number by Navigating to setting Genera lAbout


Note that if this phone is not activated you can simply check the back of the iphone



In This is video the imei i will be using = 352023070469255 with SN C7KPXH8EG5MP
the phone iclod is actually on let's use SN Same result with the SN Number


The second site is fore checker if its Telephone Technical Support: Expired Repairs & Service Coverage:
I will also be dropping the two site i will be using to check the sevice below

Click here for icloud cheacker https://www.icloud.com/activationlock/


checke if its Telephone Technical Support: Expired Repairs & Service Coverag http://iphoneimei.info/


Remember to subscribe my channel for more useful tutorial like this and also share if you find this tutorial helpful

always feel free to comment below if there is any issue you encouter during the Tutorial\


WATCH VIDEO HERE
https://www.youtube.com/watch?v=sC-nhdCekN8

welcome i will be taking you tutorial on how to flash Nokia Lumia note that this tutorial can also be use for other nokia device

have already install the software needed for the tutorial but try to go back and show you how i install it


this is the file of the phone am using for the tutorial

My phone Model is Nokia 900 with RM-823 You can check your phone model by removing the sim slot and also takout the sim

Make sure you do a proper backup of your device before going through this tutorial

i will be also dropping the link for all other Nokia firmware download

Thanks for Waching

Remember to subscribe my channel for more useful tutorial like this and also share if you find this tutorial helpful

always feel free to comment below if there is any issue you encouter during the flashing process




All Nokia Lumia Firmware Download Link http://www.lumiafirmware.com/ser/RM-823/guid/059N4K0

All other Nokia Firmware Link http://forum.gsmhosting.com/vbb/f299/all-nokia-flash-files-daily-updated-1603706/ or www.mrcrab.net/nokia.html Note make sure you Download all file minimum should be 12


Nokia Data Package Manager Download Link http://d-h.st/XR3


Nokia Care Suit http://bitshare.com/?f=i12ad0mj

UserGroupConfiguration.cfg http://d-h.st/wJz

Watch full tutorial video here
https://www.youtube.com/watch?v=7o6W4qB1TEM&feature=youtu.be



https://www.youtube.com/watch?v=-G_4PEC3CUQ

Requirement

Samsung Latest Usb driver http://androidxda.com/download-samsung-usb-drivers

Nv item reader_write https://drive.google.com/file/d/0B6Rh2XPre9rOakxQcHo5T015dXM/view

After you follow the step above enable usb debugging on your device by going to setting>build tap it 5 times then u will see a pop up with the message you are now a developer

Change to change USB mode by dialing *#0808# or *#7284# with phone connected to PC select Qualcomm usb settings and then check RMNET + DM +MODEM click on wait for window to install the driver, confirm installation by right clicking computer icon then scroll down to select properties, on the left hand side select device manager then u will see the COM port installed

Unzip Nv item reader_writer and run as administrator then click connect from the top menu wait till you get a message with connect to COM port successuful

read more http://mobileinfosite.org/repair-samsung-loscorrupt-imei/

for Htc device you need to bring it to or store at Computer village No 1 Olaayeni beside Slot at Medical road

Samsung Device Fix During software upgrade error

I recently encounter this issue after flashing a Samsung Galaxy Tab3 to it stock firmware which end up with a message on the screen that software upgrade encounter problem connect to Kies

Kies is a Multipurpose Tools for Managing a Samsung device like backup, transfer of music and Ota update of firmwareI thought it was a wrong firmware so i decided to check back the firmware which was the right firmware then i decide to flash it back again with Odin with no progress, i decided to start doing some research before coming across the permanent Fix
If your Samsung device encounter the same issue follow this step by step useful guild

Requirement

Original Samsung device
USB cable
Fast and working internet
Samsung Kies download here
Locate the device Model and SN number you will see this by pulling out the battery write it down somewhere

Continue reading http://mobileinfosite.org/samsung-kies-firmware-update/

If you have any issue after follow this tutorial drop comment below

Factory Protection Lock is a Security Protection which will not enable a lost or stolen phone be use by another user even by doing a factory reset or hard reset, its will always ask for activation email just like icloud account by Apple the account(how to remove icloud account), it can either be gmail or Samsung account found on all Android with 5.1 or higher operating systems, It can be removed from other android devices by Flashing their factory stock rom firmware but Samsung can not be removed by factory stock rom firmware.


readmore at http://mobileinfosite.org/remove-all-samsung-factory-protection-lock/

Comment below for success

Monkey virus is a very common virus that attack Android devices recently and its so stubborn that you can't remove it by factory reset except using a stock rom firmware, with this tutorial you wont need to flash your Android device to avoid loss of Data.





All credits go to Nuh99 of XDA forum for dropping this useful tips which has been successful on 5 different Android

Make sure you have a rooted device with superSU installed learn how to root all Android here





Requirements

busybox
Terminal emulator
Root explorer pro


After installing all the necessary tools, Enable usb debugging by navigating to setting>About>Build tap it 5 times and a message will pop up stating you are now a Developer navigate back to setting and you will see Developer option before about



Turn off wifi/3G/4G, and then go to settings> apps> all> disable time service and monkey test. (If already frozen via titanium backup or other app) skip this.

Open Root explorer go to system/xbin and see if there is any file starting with a dot (eg: .ext.base) also note that every (.) file has diff permission then the rest of other files. So just remember those files with dots because those are the one that you're going to remove in terminal emulator.

Go back to system and then go to Priv-app folder and look for these two files
cameraupdate.apk [2] providerCertificate.apk and also notice permission of these two files are different then the rest of Apks so these two are the base of MT TS virus and needs to be deleted.

Open Terminal Emulator OR if you have access to your device via adb from a computer.





WHAT TO TYPE IN TERMINAL EMULATOR or ADB

But i will illustrating with Window

go to Window search box and type ADB a box will pop up the type the following command

adb shell
su
continue reading http://mobileinfosite.org/remove-android-monkey-test-time-service-virus/

yea is it on the main menu or on activation state

Comment below with the iphone imei to avoid buying a stolen phone or an icloud lock iphone
you can visit my website for more tutorial www.mobilesite.org

Hard rest is used to reset phone if the password is lost kindly leave comment below if you need to hardrest your phone

you need to navigate to Settings > Data usage > menu and thick restrict background data lemme know if this help

State all nokia phones software problem here and lemme help you

update to ios 9.2.1 for iphone 4s click here to download http://mobileinfosite.org/update-for-ios-9-2-1-released/

restore the phone by following the tutorial in this link http://mobileinfosite.org/restore-forgotten-iphone-ipad-or-ipod-password-lock/
and let me know if the solution is helpful

hello guys this is mobile solution
i will be attending all issue corning your iphone device here when you ask
but let me discuss the most question ask by my client
Restore and fix forgotten password of your apple device

restore tutorial is first post of 2016 and i hope it will be worth reading and helpful

Note: before proceeding make sure you are the real owner of the device or just be sure it doesn't have an icloud account

use this to be sure check and make sure your phone is back up or check ( how to back up your on data on iphone) to avoid loss of data except you've back it up on icloud

Requirement

Itune and make its up to date

Usb cable make its original

Mac or Pc

your apple device make sure its fully charged

Internet connection

and the latest firmware with you can get here download through itune directly in recovery mode

if you have gotten all the requirement then you are good to go

First step: is to open your itune then connect your phone in recorvery mode by switching off then holding the power and the home botton at the same time and when the apple logo comes up release the poer botton and keep holding the home botten until the phone indicate connect to itune then itune will recognize it in restore mode

Second step: it will prompt you to update or Restore iPhone chose it by holding down the shift key on PC command+shift key on mac

then locate the file where you download it or just download it direct through itune if you don't have the file

Restore forgotten iPhone, iPad or iPod password lock

3rd step: start the restoring process and its going to show the version of the os relax and let it do its job because the restore process might take several minute

4th step: when the restore process is done you can either restore your old backup or set it as new with your itune. then your apple device is back to life
all downloads can be found here http://mobileinfosite.org/restore-forgotten-iphone-ipad-or-ipod-password-lock/
be sure to drop your own iphone issue here and i will be willing to help

am writing this tutorial because so many people have not been able to change there imei on this latest Os
Before you follow this tutorial make sure you back up your phone original firmware for current and future purpose using latest Mtkdroid tools check my next tutorial on that.
Download mobile uncle here or Mtk engineering mode here
before you can know how to change android imei to blackberry imei you need to know how to use Sp flash tool see tutorial here
The first procedure is to root your device using
Sp flash tool which can be download here
Super Su which is a zip file which can be download here
Twrp which is recovery for lollipop for entering into recovery mode download twrp here
Unzip the 2 files except SuperSu.zip cause they are all in zip format, open flash tool and locate the twrp folder locate the scatter file and open it you will notice that only recovery that will be mark from the box so click on download
Note that if your device has recovery you don’t need to download the two file all you need is the Super SU.Zip
Place the SuperSU.zip file insde your sd card and power of your device
Enter into recovery mode by Holding the Volume + power button together and releasing the power button when the logo popup theuse the volume key to navigate to install update from Sd then locate your Super SU.zip then it will install don’t bother if it tells you file error
Power on the device and quickly open the Mobile uncle or Mtk engineering and update will pop up click update and you will be able to access the engineering mode you can now proceed to changing the imei to blackberry imei or if you want to repairer the imei
Requirement
Rooted Mtk device
Mobile uncle or Mtk engineering mode app
New blackberry imei which you can download blackberry imei generator here or check the back of a blackberry device if you have one by removing the battery if you want to repair imei
If you have finish the above step then proceed by opening Mobile uncle or Mtk engineering mode app scroll through by navigating to radio>>CDS information then you will see your sim1 or sim2, which sim1 is always 3G and sim2 2G image below
how to change android imei to blackberry imei
Open then you will see AT+ and enter the following command EGMR=1,7,” sim1 imei” or EGMR=1,10,”Sim2 imei then scroll + and add space e.g. AT+ EGMR=1,7,”352479040443897” then click on send at command.
you have complete the tutorial on how to change android imei to blackberry imei
download all file here http://mobileinfosite.org/how-to-change-android-imei-to-blackberry-imei/

With release of os 10.3.2 brings the new security for blackberry10 user called blackberryantitheft.
blackberryantitheft benefit user if phone is been stolen and it will prevent another user
from accessing the phone with a request for main user blackberryID during activation.You can turn off the anti-theft feature by removing your device from your BlackBerry Protect account. When you remove your device from your BlackBerry Protect account, BlackBerry Protect is turned off on your device and you can't use the BlackBerry Protect website to help find your device, if it is ever lost or stolen. Someone else can set up the device to use.
Am writing the bypass tutorial to help people who forgot their blackberry password or those who mistakenly wipe their phone
download all file here http://mobileinfosite.org/blackberryantitheft-account-bypass-tutorial/

contact Mabtech for that there office is located at ikeja computer village
11 Otigba Street Computer Village, Ikeja, Lagos

Landline
017923017

Mobile
08033079027

Share all your smartphone problem and let help you solve it
our company is located at No 2 computer village